Regency ONRTSP3624 User manual

Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
Parts :
TT-E: Return Top
(35.5” x 23.5” x 1”)
Quantity: 1
MP-I: Return Modesty
(20” x 12” x 1”)
Quantity: 1
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
PED-H
TT-E
MP-I
PED-G
PED-F
PED-F: File File Pedestal
(15.5” x 23.5” x 25”)
Quantity: 1
PED-G: Ped Foot Bracket
(23.5”D)
Quantity: 1
PED-H: Ped Top Bracket
(23.5”D)
Quantity: 1
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To
lock Cam, turn clockwise.
Figure 1:
36” Single Pedestal Return • ONRTSP3624 • INSTRUCTIONS
CARTONS: TT3624, MP2012, PFF24
36” Single Pedestal Return
Page 1

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
Hardware :
F: Flat Bracket
Quantity: 4
G: Allen Key
Quantity: 1
H: Fine threaded
Cam Pins
Quantity: 2
L: 3/4” Short Bolts
(19mm)
Quantity: 22
I: Glides
Quantity: 2
J: Cam Caps
Quantity: 2
NOTE : PRODUCT IS REVERSIBLE.
SOME STEPS INCLUDE BOTH RIGHT AND LEFT ORIENTATIONS.
Please examine all parts before assembly. Hardware placement is critical.
N: Corner Bracket
Quantity: 2
K: 1.5” Long Bolts
(38mm)
Quantity: 12
M: 3/4” Wood Screws
(19mm)
Quantity: 15
REMOVE PEDESTAL DRAWERS FOR INSTALLATION
STEP 1 : Pull out each drawer on the File File Pedestal(PED-F) and nd the black tabs at the end of the suspension. Lift one side
up and press the other side down and simultaneously pull the drawer out. This will unlock the drawer and release it. Repeat this for all
drawers.
drawers.
O: Handles
Quantity: 2
36” Single Pedestal Return
Page 2
36” Single Pedestal Return • ONRTSP3624 • INSTRUCTIONS
CARTONS: TT3624, MP2012, PFF24

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 2 : Pedestal is Reversible. Decide on a Pedestal orientation(Left and Right). According to the orientation that you choose,
remove 2 Cam Pin Covers from the File File Pedestal(PED-F) in the location shown below. Then insert a Fine threaded Cam Pin(H)
into each of the revealed inserts.
H
H
PED-F
H
H
PED-F
STEP 3 : Attach the Ped Foot Bracket(PED-G) to the bottom of the File File Pedestal(PED-F) with 3 Long Bolts(K) and 3 Wood
Screws(M). Also, insert 2 Glides(I) into Ped Foot Bracket(PED-G).
NOTE: Flange on Ped Foot Bracket should face toward your Cam Pin location from STEP 2.
K
K
K
M
M
M
PED-G
PED-F
PED-G
Flange
I
I
PED-F
LEFT RIGHT
36” Single Pedestal Return
Page 3
36” Single Pedestal Return • ONRTSP3624 • INSTRUCTIONS
CARTONS: TT3624, MP2012, PFF24

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 4 : Use 6 Short Bolts(L) to attach Ped Top Bracket(PED-H) to Return Top(TT-E) in the location shown below.
Do not tighten bolts until all are started.
PED-H
TT-E
STEP 5 : Attach File File Pedestal(PED-F) to the Ped Top
Bracket(PED-H) using 3 Long Bolts(K).
NOTE: Cam Pins on the File File Pedestal should face inward
for modesty attachment.
PED-H
K
K
K
PED-F
Cam Pin Location
Cam Pin Location
STEP 6 : Attach the Modesty(MP-I) to the File File
Pedestal(PED-F) by inserting Cam Pins into Cam Locks.
Lock Cams (Figure 1).
PED-H
K
K
K
PED-F
MP-I
L(3)
L(3)
36” Single Pedestal Return
Page 4
36” Single Pedestal Return • ONRTSP3624 • INSTRUCTIONS
CARTONS: TT3624, MP2012, PFF24

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
YOU WILL NEED A SECOND PERSON TO SUPPORT RETURN MODESTY AND RETURN TOP FOR THIS STEP.
STEP 8 : Attach Return Modesty(MP-I) to Desk Leg with 2 Flat Brackets(F) using 4 Short Bolts(L) per bracket. Then, attach
Return Top(TT-E) to Desk Top with 2 Flat Brackets(F) using 4 Short Bolts(L) per bracket. Also, conceal Cam Locks with Cam
Caps(J).
STEP 7 : Replace Drawers and attach Handles(O) to the File File Pedestal(PED-F).
TT-E
MP-I
F
F
STEP 9 : For additional stability, attach Corner Brackets(N) to File File Pedestal(PED-F) and the Modesty(MP-I) with 6 Wood
Screws(M) per Corner Bracket.
36” Single Pedestal Return
Page 5
36” Single Pedestal Return • ONRTSP3624 • INSTRUCTIONS
CARTONS: TT3624, MP2012, PFF24