Regency Legacy LBC3020 User manual

Parts:
E: Thumb
Screws
F: Shelf Pins
K: Cam Pin
L: Covers
J: Top
D: Right Side
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Keep all hardware parts and packaging out of reach of children.
Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email [email protected]
LBC3020 • Legacy 20” Low Open Shelf Cabinet • INSTRUCTIONS
Organize your parts.
Hardware:
C: Left Side
I: Stringer
Quantity: 2
B: Bottom
H: Seat
Quantity: 4
Quantity: 1
Quantity: 1
Quantity: 1
Quantity: 1
Quantity: 1 Quantity: 1
Quantity: 4
Quantity: 13
Quantity: 13
Quantity: 1
A: Back
G: Back

STEP 1: Attach Foot (G) to the Bottom (B).
STEP 3a: Attach Bottom (B) to Back (A) by lining up the
Cam Pin (K) with the preexisting hole on the side of the
Bottom (B).
STEP 2: Insert 1 Cam Pin (K) into preexisting hole in the
Back (A).
STEP 4: Populate Left Side (C) with six Cam Pins (J) in
preexisting holes. Tighten until they stay in place.
STEP 6: Tighten Cam Locks on both Bottom (B) and
Back (A) where they meet the Left Side (C).
Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email [email protected]
LBC3020 • Legacy 20” Low Open Shelf Cabinet • INSTRUCTIONS
Organize your parts.
B
B
B
A
A
A
K
GK
CK
K
B
BB
A
AA
C
C
STEP 5: Place assembled
Bottom (B) and Back (A) onto
the Left Side (C) by lining up
Cam Pins (K) with preexisting
holes.
STEP 3b: Tighten the cam lock on
the underside of the Bottom (B).

STEP 9: Place Bookcase so it is sitting upright. Insert all
Shelf Pins (F) into preexisting holes in both Sides (C & D).
STEP 11: Place Top (J) on top of the Assembled Build.
Lining up holes with holes in Stringers (I).
STEP 10: Insert Shelf (H) into assembled build.
STEP 12: From inside, insert Thumb Screws (E) through
Spiders (I) and into the preexisting holes in Top (J).
STEP 13: Insert Covers (L) into all Cam Lock holes to cover.
Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email [email protected]
LBC3020 • Legacy 20” Low Open Shelf Cabinet • INSTRUCTIONS
Organize your parts.
I
C
F
H
D
C
JE
E
I
J
I
C
D
B
BI I
D
A
II
I
D
K
STEP 7b: Then, populate Right
Side (D) with the Cam Pins (J).
STEP 7a: Attach both Stringers (I) into the Left Side (C) by
lining up preexisting holes with Cam Pins (K).
STEP 8b: Tighten Cam Locks
in both the Stringers (I) and the
Bottom (B).
STEP 8a: Attach Right Side (D) to build by lining up Cam
Pins (K) with holes in Bottom (B), Back (A) and Stringers (I).