Regency TVRD7236 User manual

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
TVRD7236 • INSTRUCTIONS
B C
K
DE
Hardware:
A: Wood Screws(8) • B: Cam Pins(15) • C: Caps(15) • D: Glides(20) • E: Long Bolts & Washers(8) • F: Small Bolts(12)
G: Dowel Rods(16) • H: Cam Locks(15) • I: Flat Brackets(3) • J: Medium Bolts & Washers (12) • BB: Screw Bolt(24)
LM
Parts:
K: Desk Top • L: Desk Modesty • M: Left Desk Corner • N: Right Desk Corner • O: Return Corner • P: Return Top
Q: Return Modesty • R: Box/Box/File Ped • S: File/File Ped • T: Desk Drawer • U: Keyboard Drawer • V: Desk Transaction
Top • W: Return Transaction Top • X: Transaction Side Panel(2) • Y: Desk Transaction Modesty • Z: Return Transaction
Modesty 1 • AA: Return Transaction Modesty 2
NO
Q
P
Figure 1: To open Cam, point
arrow toward Cam Pin hole.
To lock Cam, turn clockwise.
F G H
RST
IJ
U
ABB
V
W
X
Y
ZAA
Figure 2: Insert Screw Bolt
into Lock and tighten by turning
black screw clockwise.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
TVRD7236 • INSTRUCTIONS
STEP 1 : Insert 2 Cam Pins(B), 4 Cam Locks(H), 2 Dowel
Rods(G) & 3 Glides(D) into both Desk Corners(M,N).
STEP 2 : Insert 5 Cam Locks(H) & 6 Dowel Rods(G) into Desk
Modesty(L).
H
H
HH
B
B
H
H
H
H
H
G
G
G
G
GG
M, N L
D
D
D
GG
STEP 3 : Attach both Desk Corners(M,N) to Desk Modesty(L) by
inserting Cam Pins(B) into Cam Locks(H). Before Locking cams,
secure Corners to Modesty using 8 Wood Screws(A). Lock Cams
(see gure 1).
STEP 4 : Insert 5 Cam Pins(B) into Desk Top(K). Attach Desk
Top to Desk Corners and Desk Modesty by inserting Cam Pins
into Cam Locks. Lock Cams. (see gure 1).
L
M N
B
B
B
B
B
STEP 5 : Insert 4 Cam Locks(H), 2 Dowel Rods(G) & 4 Glides(D)
into the Return Corner(O).
STEP 6 : Insert 2 Cam Locks(H), 2 Dowel Rods(G) & 2
Glides(D) into Return Modesty(Q).
K
H
D
G G
H H H
D
D
O
HH
GG
Q
A A
D
D D

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
TVRD7236 • INSTRUCTIONS
STEP 8 : Attach Return Modesty(Q) to Desk using 2 Medium Bolts & Washers(J).
Q
J
J
STEP 7 : Attach Return Corner(O) to Return Modesty(Q) using 2 Medium Bolts & Washers(J).
OQ
J
J
Q
J
J
O
NOTE: ALL REMAINING STEPS INCLUDE INSTRUCTIONS FOR LEFT AND RIGHT ORIENTATIONS
LEFT RETURN RIGHT RETURN
J
J
Q
RIGHT RETURNLEFT RETURN
STEP 9 : Insert 6 Cam Pins(B) into Return Top(P).
RIGHT RETURNLEFT RETURN
B
B B
B
B
B
P
B
B
B B
B
B
P
Q

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
TVRD7236 • INSTRUCTIONS
STEP 10 : Attach 1 Transaction Side Panel(X) to Return Top(P) using 1 Screw Bolt(BB). Insert 1 Screw Bolt(BB) into the top of Side
Panel(X).
RIGHT RETURN
LEFT RETURN
BB
P P
X X
STEP 10A : Attach Return Top(P) to Return Modesty(Q) & Return Corner(O) by inserting Cam Pins into Locks. Lock Cams.
STEP 10B : Secure Return Top(P) to Desk Top(K) using 2 Flat Brackets(I) and 4 Small Bolts(F) per Bracket.
RIGHT RETURNLEFT RETURN
STEP 11 : Insert 4 Screw Bolts(BB) & 2 Dowel Rods(G) into Return Transaction Modesty 1(Z).
RIGHT RETURNLEFT RETURN
Z Z
BBBB
BB
BB
BB
BB
BBBB
G
G G
G
BB BB
BB

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
TVRD7236 • INSTRUCTIONS
STEP 12A : Attach Return Transaction Modesty A(Z) to Transaction Side Panel(X) by inserting Screw Bolt into cooresponding holes on
the side panel. Tighten Screw Bolt Lock (Figure 2).
STEP 12B : Insert 2 Screw Bolts(BB) through pre-existing holes in Return Top(P) to attach Return Transaction Modesty 1(Z).
RIGHT RETURNLEFT RETURN
Z
Z
XX
STEP 13A : Insert 2 Screw Bolts(BB) into Return Transaction Modesty 2(AA).
STEP 13B : Connect Return Transaction Modesty 2(AA) to Return Transaction Modesty 1(Z) with Dowel Rods. Insert 2 Screw Bolts(BB)
through pre-existing holes in Desk Top(K) to attach Return Transaction Modesty 2(AA).
RIGHT RETURN
LEFT RETURN
AA AA
BB
BB BBBB
BB BB
Z
BB BB
Z
AA Z
BB
AAZ
BB BBBB

X Y
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
TVRD7236 • INSTRUCTIONS
STEP 14A : Insert 7 Screw Bolts(BB) into Desk Transaction Modesty(Y).
STEP 14B : Attach Desk Transaction Modesty (Y) to Return Transaction Modesty 2(AA) by inserting Screw Bolts into cooresponding holes
on Return Transaction Modesty 2. Tighten Screw Bolt Locks (Figure 2). Insert 3 Screw Bolts(BB) through pre-existing holes in Desk
Top(K) to attach Desk Transaction Modesty(Y).
RIGHT RETURNLEFT RETURN
Y
BB
BB
BB BB BB
BB
BB
YY
BB BB BB BB BB BB
STEP 15A : Attach Second Transaction Side Panel(X) to Desk Transaction Modesty(Y) by inserting Screw Bolts into cooresponding holes
on the side panel. Tighten Screw Bolt Locks (Figure 2).
STEP 15B : Insert 1 Screw Bolt(BB) through pre-existing holes in Desk Top(K) to attach Transaction Side Panel(X). Insert 1 Screw
Bolt(BB) into Top of Transaction Side Panel(X).
X
K
STEP 16 : Attach Desk Transaction Top(V) by inserting existing Screw Bolts on Modesty into Screw Bolt Locks on underside of top(V).
Tighten Screw Bolt Locks(Figure 2).
STEP 15A
LEFT RETURN RIGHT RETURN
VV
BB
STEP 15B
BB

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
TVRD7236 • INSTRUCTIONS
STEP 17A : Attach Return Transaction Top(W) by inserting existing Screw Bolts on Modesty into Screw Bolt Locks on underside of top(W).
Tighten Screw Bolt Locks(Figure 2).
STEP 17B : Secure Return Transaction Top(W) to Desk Transaction Top(V) using 1 Flat Brackets(I) and 4 Small Bolts(F).
LEFT RETURN RIGHT RETURN
W W
W V
STEP 18A : Begin by removing all drawers from Pedestals.
For Suspension A
Find the black tabs at the end of the suspension. Lift one side up
and press the other side down simultaneously and pull the drawer
out.
STEP 18B :
Suspension B
Find the black tabs at the end of the suspension. Press in on each
tab and lift drawer up and out.
STEP 19A : Insert 4 Glides(D) into bottom of each pedestal.
Attach Box/Box/File Ped(R) using 4 Long Bolts & Washers(E).
STEP 19B : Repeat Step 19A for the File/File Ped(S).
Replace all Drawers.
NOTE: PEDESTAL ORIENTATION IS INTERCHANGEABLE.
Suspension B
Suspension A
EE
EE

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
STEP 20 : Attach Desk Drawer(T) & Keyboard Drawer(U) to Desk Using 4 Medium Bolts & Washers(J) each Drawer.
NOTE: DRAWER ORIENTATION IS INTERCHANGEABLE.
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
TVRD7236 • INSTRUCTIONS