Regency ONCSBKBK6020 User manual

IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Organize your parts and hardware. You will need (2) people and a Phillips head screwdriver.
AB C Figure 1: To open Cam,
point arrow toward Cam
Pin hole. To lock Cam,
turn clockwise.
DEFG
I J KLM
Parts :
I: Back(2) • J: Base Panel(2) • K: Top Panel(2) • L: Right Side(2) • M: Left Side(2) • N: Shelf(2) • O: Metal Legs(4)
P: Leg Connector Bracket(2) • Q: Credenza Top
N
O
N
J
STEP 1 : Insert 2 Cam Pins (D) into Back Panel (I). Place
Back Panel (I) on a at surface with pins facing up. Attach base
(J) and Top (K) by inserting and locking cams (see g 1.) The
cam locks on the Base and Top should both be facing down.
STEP 2 : Insert 6 Cam Pins (D) into each Side (L,M)
D
L
K
D
I
cam locks on the Base and Top should both be facing down.
KJ
I
DDD
D
D
D
M
D
D
D
D
DD
P Q
Q
H
Hardware :
A: Glides(8) • B: Screws(12) • C: Bolts(8) • D: Cam Pins(14) • E: Shelf Pins(4) • F: Cam Cover(14) • G: Allen Key
H: Credenza Top Screws(8) • S: Long Bolts (4) • T: Washers(12)
S
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
Double Shelf Low Credenza • ONCSBKBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020
Storage Cabinet/ Single Shelf Low Credenza • ONCSSCBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, OSCD3020
Double Storage Cabinet Low Credenza • ONCSSCSC6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, (2)OSCD3020
T

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 3 : Attach sides (L,M) by inserting and locking cams.
IL
K
J
STEP 4 : Insert 2 Glides(A) into each Metal Leg (O).
A A
O
STEP 7 : Connect the two center Foot Brackets(O) to each other by momentarily removing existing Long Bolts, placing Leg
connector Bracket(P), then re-inserting Bolts.
connector Bracket(P), then re-inserting Bolts.
OO
P
SS
SS
SS
Double Shelf Low Credenza • ONCSBKBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020
Storage Cabinet/ Single Shelf Low Credenza • ONCSSCBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, OSCD3020
Double Storage Cabinet Low Credenza • ONCSSCSC6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, (2)OSCD3020
M
STEP 5 : Attach Legs(O) by placing 1 Washer(T) between the base and each wood screw hole on Legs(see gure 2). Then insert
4 Bolts(C) and 2 long bolts(S) according to placement below. Finish fastening with 6 Screws(B).
NOTE: When the two units are next to each other the long bolts are next to each other (see step 7).
: When the two units are next to each other the long bolts are next to each other (see step 7).
O
J
SB
CB
SB
T
T
T
O
S
C
S
B
B
B
C
C
CB
B
B
Figure 2
STEP 6: REPEAT STEPS 1-5 FOR SECOND STORAGE COMPONENT.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 8 : Insert 8 Shelf Pins(E) at desired height and place shelves(N).
EEE E
E
EE
E
IF YOU HAVE DOORS, PLEASE CONTINUE INSTRUCTIONS.
Double Shelf Low Credenza • ONCSBKBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020
Storage Cabinet/ Single Shelf Low Credenza • ONCSSCBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, OSCD3020
Double Storage Cabinet Low Credenza • ONCSSCSC6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, (2)OSCD3020

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP A : Use 2 Wood Screws(F) to attach each Hinge
Support(C) to the sides. The hinge adjustment screw on each
bracket should face toward the back of the unit.
C
C
C
C
STEP B: Attach the Lock Latch(H) and Door Stop(I) to the
Top with 4 Small Wood Screws(G) as shown below.
IH
G
GG G
STEP C : Attach 1 Handle(A) to each Door(J,K) with 2
Bolts(E).
J,K
A
EE
STEP D : Attach 4 Hinges(B) to Doors(J,K) with 8 Wood
Screws(F).
F
F
F
F
F
F
F
F
F
F
B
Hardware :
A: Handles(2) • B: Hinges(4) • C: Hinge Support(4) • D: Keys • E: Bolts(4) • F: Wood Screws(16)
G: Small Wood Screws(4) • H: Lock Latch • I: Door Stop • J: Left Door • K: Right Door
A B C DEFGHI JK
Double Shelf Low Credenza • ONCSBKBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020
Storage Cabinet/ Single Shelf Low Credenza • ONCSSCBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, OSCD3020
Double Storage Cabinet Low Credenza • ONCSSCSC6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, (2)OSCD3020
NOTE: HARDWARE QUANTITIES WILL DOUBLE IF INSTALLING TWO SETS OF DOORS.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
Double Shelf Low Credenza • ONCSBKBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020
Storage Cabinet/ Single Shelf Low Credenza • ONCSSCBK6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, (2)OSCD3020
STEP E1 : Connect 4 hinges(B) to Hinge Supports(C)
STEP E2 : The screw(EA) located on Hinge Support(C) interlocks with the opening on hinges(B) just as screw(EB) located on
hinges(B) interlocks with the Hinge Support(C) opening.
Note.The screw EB is an adjustment for the door position. Turn right to adjust door to center and left to adjust toward the side.
Your Final Door(O,P) interior should look like this.
STEP E3: If you are building a DOUBLE STORAGE CABINET LOW CREDENZA, repeat steps A-E
EA EB
C
B
STORAGE CABINET/ SINGLE SHELF LOW CREDENZA DOUBLE STORAGE CABINET LOW CREDENZA
Double Storage Cabinet Low Credenza • ONCSSCSC6020 • INSTRUCTIONS
CARTONS: OTT6020, (2)OPSC3020, (2)OSCD3020