Regency ONCSLFBK7124 User manual

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and a rubber mallet.
Hardware :
A: Glides(8) • B: Assembly Key • C: Shelf Pins(4) • D: Cam Pins(15) • E: Wood Screws(12) • F: Small
Bolts(24) • G: Medium Bolts(20) • H: Cam Covers(4) • I: Cam Caps(9) • U: Long Bolts(4) • V: Washers(12)
A B C
STEP 1 : Insert 2 Cam Pins(D) into Back Panel(J). Attach
Base Panel(K) to Back Panel by inserting Cam Pins into
Cam Locks. Lock Cams (Figure 1). NOTE: Cam locks face
down.
Figure 1: To open
Cam, point arrow toward
Cam Pin hole. To lock
Cam, turn clockwise.
D E F GHI
Parts :
J: Back Panel • K: Base Panel • L: Floating Top • M: Left Side Panel • N: Right Side Panel • O: Shelf • P: Top
Panel • Q: Foot Bracket(4) • R: Top Bracket(4) • S: Leg Connector Bracket(2) • T: Lateral
J K LM N
OPQ
R
STEP 2 : Insert 4 Cam Pins(D) into Left Side Panel(M) &
Right Side Panel(N).
J
K
DD M
DD
D
D
N
DD
D
D
S
T
Lateral/ Single Shelf Credenza • ONCSLFBK7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624
U
Lateral/ Storage Cabinet Credenza • ONCSLFSC7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624, OSCD3624
V

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 3 : Attach Side Panels(M,N) to Back & Base
Panels(J,K) by inserting Cam Pins into Cam Locks. Lock
Cams (Figure 1).
J
K
MN
Lateral/ Single Shelf Credenza • ONCSLFBK7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624
Lateral/ Storage Cabinet Credenza • ONCSLFSC7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624, OSCD3624
STEP 4 : Insert 2 Glides(A) into each Metal Leg (O).
A A
O
STEP 5 : Attach Legs(O) by placing 1 Washer(V) between the base and each wood screw hole on Legs(see gure 2). Then insert 4
Bolts(G) and 2 long bolts(U) according to placement below. Finish fastening with 6 Screws(E).
NOTE: When the two units are next to each other the long bolts are next to each other (see step 12).
E
G
G
G
U
G
U
E
E
E
E
EUE
GE
UE
V
VV
Figure 2
O
K
O

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 11 : Attach Floating Top(L) to both components using 3
Long Bolts(G) per Top Bracket(R).
LRR
RR
STEP 9 : Pull out each drawer one by one and nd the black
tabs at the end of the suspension. Lift one side up and press the
other side down and simultaneously pull the drawer out. This will
unlock the drawer and release it. Repeat this for all drawers.
STEP 10 : Attach 4 Top Brackets(R) to Floating Top(L) using 6
Small Bolts(F) per Bracket.
L R RR R
Lateral/ Single Shelf Credenza • ONCSLFBK7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624
Lateral/ Storage Cabinet Credenza • ONCSLFSC7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624, OSCD3624
STEP 8 : REPEAT STEPS 4 & 5 TO ATTACH
LEG BRACKETS TO THE LATERAL(T).
STEP 6 : Insert 5 Cam Pins(D) into Top Panel(P) STEP 7 : Attach Top Panel(P) to Back Panel(J) and Side
Panels(M,N) by inserting Cam Pins into Cam Locks. Lock Cams
(Figure 1).
P
D
D
D
D
D
J
P
M N

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 13 : Insert 4 Shelf Pins(C) at desired height. Place Shelf(O). Re-Install Drawers. Finish by
concealing Cam Locks with Cam Caps(I) & Cam Covers(H).
C
CC
C
STEP 12 : Connect the two center Foot Brackets(Q) to each other by momentarily
removing existing Long Bolts(U), placing Leg connector Bracket(S), then re-inserting Bolts.
QQ
S
UU
UU
Lateral/ Single Shelf Credenza • ONCSLFBK7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624
Lateral/ Storage Cabinet Credenza • ONCSLFSC7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624, OSCD3624
IF YOU HAVE DOORS, PLEASE CONTINUE INSTRUCTIONS.

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
Lateral/ Single Shelf Credenza • ONCSLFBK7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624
Lateral/ Storage Cabinet Credenza • ONCSLFSC7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624, OSCD3624
STEP A : Use 2 Wood Screws(F) to attach each Hinge
Support(C) to the sides. The hinge adjustment screw on each
bracket should face toward the back of the unit.
C
C
C
C
STEP B: Attach the Lock Latch(H) and Door Stop(I) to the
Top with 4 Small Wood Screws(G) as shown below.
IH
G
GG G
STEP C : Attach 1 Handle(A) to each Door(J,K) with 2
Bolts(E).
J,K
A
EE
STEP D : Attach 4 Hinges(B) to Doors(J,K) with 8 Wood
Screws(F).
F
F
F
F
F
F
F
F
F
F
B
Hardware :
A: Handles(2) • B: Hinges(4) • C: Hinge Support(4) • D: Keys • E: Bolts(4) • F: Wood Screws(16)
G: Small Wood Screws(4) • H: Lock Latch • I: Door Stop • J: Left Door • K: Right Door
A B C D E FGH I JK

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
Lateral/ Single Shelf Credenza • ONCSLFBK7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624
Lateral/ Storage Cabinet Credenza • ONCSLFSC7124 • INSTRUCTIONS
CARTONS: OTT7124, OPLF3624, OPSC3624, OSCD3624
STEP E1 : Connect 4 hinges(B) to Hinge Supports(C)
STEP E2 : The screw(EA) located on Hinge Support(C) interlocks with the opening on hinges(B) just as screw(EB) located on
hinges(B) interlocks with the Hinge Support(C) opening.
Note.The screw EB is an adjustment for the door position. Turn right to adjust door to center and left to adjust toward the side.
Your Final Door(O,P) interior should look like this.
EA EB
C
B