Rollplay 12V COLORADO W451 Assembly instructions

®
12V COLORADO
Owner’s Manual and Assembly Instructions
Model #: W451, W451- W451-01, W451-F-01, W451-02, W451-F-02, W451-03, W451-F-03
Read and understand the entire manual before assembly and operation. The vehicle must be
assembled by an adult who has read and understands the instructions.
Made in China.
Styles and colors may vary. Do not return to store. Email [email protected] for
assistance and replacement parts.
IMPORTANT:
Save this manual with your sales receipt.

Introduction
Thank you for purchasing this vehicle from Rollplay. We hope the rider
enjoys it for miles to come. Please read this instruction guide carefully
before assembling and operating the vehicle. Please have your model
number and serial number ready before calling. Please have proof of
purchase. Keep your sales receipt or register your product at
www.rollplay.com.
Please contact Rollplay Customer Service with any questions.
Hours: 9 AM - 5 PM (CST), Monday - Friday
Phone: [phone]
Email: customerservice@rollplay.
Web: www.rollplay.com
Specifications:
BATTERY
MOTOR
AGE
MAX WEIGHT
PRODUCT SIZE
SPEED
12 12AH
12V 50W
3 Years and Up
59 kg (130 lb)
146 x 92.5 x 70 cm (57.5x36.4x27.6 in)
4 - 8 km/h (2.5 MPH - 5 MPH )
(Preset at 4km/h (2.5 MPH))
8-12 Hours
1-2 Hours
DC 12.0V 1.0A

IMPORTANT!
YOU MUST CHARGE THE BATTERY
FOR 24 HOURS BEFORE FIRST USE!
Charge the battery after each use.
Charge the battery at least once a month, even if the vehicle is not in use.
Contact Customer Service if you need assistance or replacement parts.
Please have your model number and serial number ready before calling.
Please have proof of purchase. Keep your sales receipt or register your
product at www.rollplay.com as we may require proof of purchase.
customerservice@rollplay.
1-888-982-9309
Read this entire manual to ensure
proper assembly and safe operation
of the vehicle.

4Table of Contents
Safety..........................................................5
Parts ..........................................................7
Charging Instructions ...............................8
Assemble the Rear Wheels.......................9
Assemble the Front Wheels....................10
Attach the Truck Bed ..............................11
Attach the Mirrors ...................................12
Attach the Windshield and Dashboard..13
Attach the Steering Rod .........................14
Assemble the Steering Wheel ................15
Attach the Doors .....................................16
Open Tailgate ...........................................21
Battery Attachment .................................17
Attach the Seat ........................................18
Operation Instructions ............................19
Maintenance ............................................22
Seatbelt 02....................................................
Troubleshooting Guide............................2
FCC Information ......................................2
Service and Repairs ...............................2
Warranty ...................................................2
Product Registration ...............................2
..................... ......2

5
Safety
WARNING: SAFETY RIDING RULES
The user must follow all safety rules and guidelines, or serious injury or death may
occur to the user.
• Always use common sense and safe practices when using the vehicle. The user
must be at least 3 years old and weigh no more than 59 kg (130 lb).
• This product contains small parts that are for adult assembly only. Keep small
children away when assembling. Remove and dispose of all protective material
and plastic bags before assembly.
•
Product Safety Commission (CPSC) Standard 16 CFR 1203.
• Only stand on the pedal board.
• Do not allow more than two rider.
• Do not overload the vehicle. Do not remove the weight restriction decals.
• Do not pull the vehicle with another vehicle or similar device.
• Keep body parts such as hands, legs, hair and clothing away from moving parts.
Moving parts can cause serious injury.
• Always wear shoes in the vehicle.
• Do not operate near streets or motor vehicles.
• Do not operate near drop-offs such as steps, steep inclines or hills. Operate on
relatively level ground.
•
• Do not operate in dangerous weather conditions such as rain or snow.
•
•
• Always use the vehicle in a safe, secure environment with adult supervision.
PREVENT INJURIES AND DEATHS:
NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view when child is in
vehicle. Direct adult supervision is REQUIRED.
NEVER use in roadways, near cars, on or near steep inclines or steps, swimming
pools or other bodies of water.
ALWAYS wear shoes. ALWAYS sit on the seat. RISK OF FIRE. Do not bypass.
Remove batteries if product is to be left unused for a long time ; Always replace the
whole set of batteries at one time , taking care not to mix old and new ones, or
batteries of different types.
!

6Safety
(Continued)
WARNING: BATTERY SAFETY
• Battery posts, terminals and related accessories contain lead and lead
• Contact exposure to battery leakage (lead acid) may cause serious injury.
Immediately contact your doctor if exposure occurs. If the chemical is on the skin,
immediately give the person water or milk. Do not give water or milk if the person
is vomiting or has decreased alertness. Do not induce vomiting.
•
explosion. It could permanently damage the system. Keep the charger housing
closed to prevent exposed wiring, which may cause electric shock.
IMPORTANT:
charged for a full 24 hours (no more than 30 hours).
WARNING: ADULT SUPERVISION
REQUIRED
• Before using the vehicle, the rider must understand the vehicle controls and safety
issues.
• It is the responsibility of the adult to educate the child and to determine if the child
is capable of understanding the vehicle controls.
• An adult must ALWAYS directly supervise the use of this vehicle.
• NEVER leave a child unsupervised in the vehicle.
!
!

7
Parts
31
• 2 AA batteries
12
2
4
5
21
9
22
23
10
25
24
26
5
11
6
8
6
15
1
3
16
18
17
20
Helpful Tip:
• Phillips screwdriver
Not Included:
7
13
14
23
19
27
30
28
29
1. Parts 16-18 and 31 are located in
the blister pack.
2. Spare parts: Screws 2.
3. Rear wheels are marked with an
"R" and front wheels are marked
with an "F".
4. The washers are located on
the axles.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
Manual
12V Battery
Steering Wheel
Rear Wheel (2)
Wheel Cover (4)
Front Wheel (2)
Car Body
Hood
Right Mirror
Left Mirror
Seat
Battery Charger
Thin Washer (6)
M10 Wheel Nut (4)
Steering Rod
Mirror Screw (2)
MP3 Cable
Mirror Nut (2)
Hex Wrench
Blister Pack
Windshiels & Dashboard
Right Door
Left Door
Steering Wheel Connector
Truck Bed
Tailgate
Seat Fixed Tray
Rear Axle
Footrest (Right)
Footrest (Left)
Screws (16)

8
Charging Instructions
ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER.
Connect the Battery:
1. Ensure the vehicle is stopped and turned
off.
2. Unlock and remove the seat.
3. Locate the white battery connector (A) that
attaches directly to the battery.
4. Connect the white battery connector to the
white battery charger connector (B).
5. Replace the seat.
Charge the Battery:
YOU MUST CHARGE THE BATTERY FOR 24 HOURS
BEFORE THE FIRST USE!
1
BA
1
2

9
Assemble the Rear Wheels
Helpful Tip:
f you encounter trouble fitting both wheels
onto the rear axle, then your rear wheel axle
may need to be realigned
Locate the washers and wheel nuts on either side of the rear
axle. Slide the rear wheel onto the axle. Ensure that the gears
on the wheel connect with the gearbox.
Slide a washer onto the axle.
S a wheel nut onto the axle, then use the hex wrench to
tighten.
Snap on the wheel cover by aligning the tabs on the cover with
the slots on the wheel.
Repeat these steps for the other rear wheel.

10 Assemble the Front Wheels
Slide a thick washer onto the front axle.
Slide the front wheel onto the front axle. The concave side should face
inward.
Slide the thin washer onto the axle.
Using the hex wrench, fasten the nut on the end of the axle and tighten
until you can not tighten any more.
Snap on the wheel cover by aligning the tabs on the cover with the
slots on the wheel .
Repeat steps 1-5 for the other front wheel.
Helpful Tip:

11
Attach the Truck Bed
Take out 12 screws from the blister pack.
Turn the truck right-side up so that the wheels are on the ground.

16
18
12 Attach the Mirrors
Remove the mirrors from the package.
Align the hole on the mirror with the hole on the car
.
Take out the screw (16) and nut (18) from the blister pack, insert
the screw into the screw hole and fasten to secure.
Repeat steps 1-3 for the other mirror.

13
Attach the Windshield and Dashboard
Connect the wire connector (A) from dashboard to the wire
connector (B) from car body. ut the connector and wires into car body
and dashboard.
Match the plastic inserts on the dashboard with the four slots on the
card body and insert into the car body at a 45 degree angle
Click the windshield into place.
A
B
Helpful Tip:

14 Attach the Steering Rod
.
.
.
Insert the straight end of the steering rod into the steering rod hole on
the underside of the . The steering
rod should slide all the way through the dashboard
Carefully turn the truck back to the position
.
surface to avoid any scratches or damage). Please not
.
Helpful Tip:

15
Assemble the Steering Wheel
WARNING!
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
Use a Phillips head screwdriver to remove the screw on the battery cover
of the steering wheel.
Insert two AA batteries into the battery .
Replace battery cover and use the screwdriver to fasten.
steering wheel screw
Align the holes on the steering wheel with the holes on the steering rod
lide the steering wheel screw through the steering wheel
the nut to the end of the screw with a sc ewdriver.

16 Attach the Doors
Align the left door with the interior facing the inside of the truck.
Position the hole on the door over the hole on the truck body and
slide the post on the bottom of the door into the hole on the truck
body side.

17
Battery Attachment
Important!
charged for a full 24 hours (see page 8 for battery charging instructions).

18 Attach the Seat
Align the seat over the battery compartment.
Ensure the locking mechanism aligns with the holes.
Slide the hooks onto the back of the seat into the slots on the car
body.

19
Operation Instructions
a
b
Screw
7
Press the left and right steering wheel buttons for horn (a) and engine sounds
(b).
Press the power switch to turn on the truck. ress the power switch again to
turn off the truck.
Battery power indicator: Press the power indicator button to check battery
level. The truck must be turned on to use.
Pull the shifter to the middle to move forward 4 km/h, 2.5 MPH. Pull the shifter
all the way up to move forward at 8 km/h, 5 MPH. Push the shifter down to go
reverse.
High-speed lockout: oosen the small screw at the base of the shifter to allow
the truck to go at the higher speed of 5 MPH. Tighten the screw to only allow the
truck to move at 2.5 MPH.

Seatbelt
To properly fasten the seatbelt, fold side B over the child’s lap.
Then fold side A over across the child’s shoulders.
Fasten side A to side B and fasten the seat belt with the Velcro.
Ensure the seat belt is at a suitable length for comfort and
safety.
The seat belt is only intended to keep child seated. Fasten
securely across waist.
A
B
20