Safe Fleet Prime Design HBI-NV11B User manual

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: i[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
2
2
3
4
11
6
1
5
10
9
7
8
Brackets (4X) End Caps (4X)Bottom Connector (2X)Top Connector (2X) Screws (8X)
Channels (2X)
Channels (2X)
T Slot Insert (18X)Square Nut (20X)M8 x 20MM (18X)
M8 x 40MM Bolt (2X)
M8 x 45MM Bolt (2X)
Channel Strip (2X)
HBI-NV11B ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
1—FBM-0048 ........................................................ (Qty 1)
Channels with hardware
CONTENTS OVERVIEW
2—Rear Crossbar Assembly.................................. (Qty 1)
3—Front Crossbar Assembly................................. (Qty 1)

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: in[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
3
HBI-NV11B ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
6—Front Drive Shaft ............................................. (Qty 1)
B Version, 38.75”
8—Z Post ............................................................... (Qty 2)
Adjustable, 7.25”
9—L Post ............................................................... (Qty 2)
Gen2, Roller Cap , 9.25”
10—Ladder Stop Assembly .................................. (Qty 2)
1.75”
5—Connecting Bar ................................................ (Qty 1)
48.00”
11—HRR Removeable Handle Assembly ............ (Qty 1)
7—Drive Arm ......................................................... (Qty 1)
Incline Version with Bushing and Hardware
4—Rear Drive Shaft .............................................. (Qty 1)
Right Hand, A Version, 50.00”
HKT-8163-Rotation Hardware Kit
Anti-Seize (1X)
Lubricant (1X)
Clevis Pin (1X)Cotter Pin (1X)
⅜” x 2.25” (2X)M8 x 25MM (1X)
1.00" Sealing
Stickers (10X)
M8 Lock Nut (5X) ⅜" Lock Nut (2X) ⅜" Flat Washer (4X)" Flat Washer (10X)
M8 x 50MM (4X)

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: in[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
4
Rear
Front
Square Nut M8
Vehicle Roof Mount
T Slot Insert
Bolt M8 x 20MM
2.75”
Channel Front
2.50”
Channel Rear
HBI-NV11B ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS
FBM-0048 MOUNTING SYSTEM
CHANNELS TO ROOF
Do not tighten.
Slide Channels onto roof Mounts and set distances as shown.
0.5
0.6
Assemble Mounts as
shown below.
0.1
0.2
Torque Allen Flat
Head Screws on Roof
Mounts to 90 in-lbs
0.4
Torque screws to 90 in-lbs
Slide the upper and lower
Channel Connectors into
Channels and align holes
0.3

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: in[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
5
Channel Rear Channel Front
99.00”
5–⅜”
Rear
Front
Left
Right
Right
Channel Strip
Bolt M8 x 45MM
Rear
Front
Left
Square Nut M8
HBI-NV11B ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS
0.7
Loosen bolts
0.6
0.8 Finger-tighten to retain positions. Do not torque until Step 1.2

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: in[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
6
1
1
3/11
2
4
6
8
6–5/16”
6–5/16” 6–5/16”
7–5/16”
Rear
Front
Front
Rear
7
9
10
5
RIGHT INCLINE ROTATION
ASSEMBLY SEQUENCE
CROSSBARS CROSSBAR ADJUSTMENT
1.1
Torque to 90 in-lbs
1.2
HBI-NV11B ASSEMBLY INSTRUCTIONS–RIGHT SIDE INCLINE ROTATION

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: in[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
7
HBI-NV11B ASSEMBLY INSTRUCTIONS–RIGHT SIDE INCLINE ROTATION
REAR DRIVE SHAFT
2.1
2.2
2.3
Torque to
90 in-lbs
2.4
CYLINDER HARDWARE CONNECTING BAR
3.2
4.1
3.1
4.2

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: in[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
8FRONT DRIVE ARM
6.2
6.3
6.1
7
FRONT DRIVE SHAFT
CONNECTING BAR FASTENERS
8.2
Torque to 90 in-lbs
8.1
Z POST
SEE QUICK START GUIDE FOR ADJUSTMENTS
8.1
5.1
Align holes
5.2
HBI-NV11B ASSEMBLY INSTRUCTIONS–RIGHT SIDE INCLINE ROTATION

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: in[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
9
HBI-NV11B ASSEMBLY INSTRUCTIONS–RIGHT SIDE INCLINE ROTATION
DRIVE SHAFT SEALING
10.1
Apply Silicone Sealant
to Connecting Bar ends
10.2
CYLINDER ADJUSTMENT
Adjust the Cylinder Flow
Control Screw to allow
approximately 3 seconds
time for the ladder to glide
down when operating the
loaded Ladder Rack.
11
9.2
Torque to 90 in-lbs
9.1
L POST
SEE QUICK START GUIDE FOR ADJUSTMENTS

PRIME DESIGN, A SAFE FLEET BRAND ▪Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪Phone: [phone] ▪Toll Free: 1.8.PRIME.RACK ▪Fax: [phone] ▪Email: in[email protected] ▪Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
10
12
12
LEFT SIDE BASE
LADDER STOPS
12.1
12.2
HBI-NV11B ASSEMBLY INSTRUCTIONS–LEFT SIDE BASE

Page Intentionally Left Blank

USAM-HBINV11B-US01 Rev-A 0118