Sauder 401442 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Cram-tested.
Clutter-removed.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-14
Français pg 15-16
Español pg 17-18
Lot # 386786 12/08/15
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Pencil Drawer
The Via Collection | 401442

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Warranty
3
4
5-14
15-16
17-18
19
401442 www.sauder.com/servicesPage 2
Electric drill with a 3/16"
and 1/16" bit
(ONLY in indicated step)

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT UPRIGHT (1)
B LEFT UPRIGHT (1)
C2 KEYBOARD SHELF (1)
D2 KEYBOARD FRONT (1)
E KEYBOARD BACK (1)
F KEYBOARD SIDE (2)
W BRACE (2)
A
B
E
F
F
W
W
C2
D2
401442www.sauder.com/services Page 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
METAL BRACKET - 4
4G
BLACK 9/16" LARGE HEAD SCREW - 8
1S
HOLE PLUG - 4
N
BLACK 7/8" MACHINE SCREW - 4
V
TOUCH-UP PEN - 1
O
BROWN 1-1/2" FLAT HEAD SCREW - 6
P Q BROWN 1" FLAT HEAD SCREW - 4
KTWIST-LOCK®FASTENER - 4
UGOLD 5/16" FLAT HEAD SCREW - 4
SILVER 9/16" LARGE HEAD SCREW - 2
S
PULL - 2
M
BLACK 1/2" FLAT HEAD SCREW - 4
T
401442 www.sauder.com/servicesPage 4
HINGE - 2
12H
40AW CABINET RIGHT - 1 40AX CABINET LEFT - 1 40AY DRAWER RIGHT - 1 40AZ DRAWER LEFT - 1

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (K) into the large holes in the UPRIGHTS (A and B).
401442www.sauder.com/services Page 5
Do not tighten the TWIST-LOCK® FASTENERS in this step.
K
A
B

Step 2
401442 www.sauder.com/servicesPage 6
Finished edge
A
B
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
U
Remember:
Righty tighty.
Lefty loosey.
Finished edge
å Fasten a CABINET RIGHT (40AW) and a CABINET
LEFT (40AX) to the UPRIGHTS (A and B). Use four GOLD
5/16" FLAT HEAD SCREWS (U).
å NOTE: The CABINET RAILS are marked "CABINET
RIGHT" and "CABINET LEFT" for easy identification.
Roller end
Roller end
40AW
40AW
40AX
40AX
Surface with
TWIST-LOCK®
FASTENERS
Surface with
TWIST-LOCK®
FASTENERS

Step 3
401442www.sauder.com/services Page 7
å Fasten four METAL BRACKETS (4G) to the BRACES (W).
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å NOTE: Be sure the BRACKETS are even with the edges
of the BRACES.
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
1S
4G
4G
4G
These holes must be here.
W W

Step 4
å Flip the UPRIGHTS (A and B) over onto the CABINET RAILS.
å Fasten the BRACES (W) to the UPRIGHTS (A and B). Use
two BLACK 9/16" LARGE HEAD SCREWS (1S).
401442 www.sauder.com/servicesPage 8
A
B
Roller end
Roller end
Edge with TWIST-LOCK® FASTENERS
Edge with TWIST-LOCK® FASTENERS
These holes must be here.
BLACK 9/16" LARGE HEAD SCREW
(2 used for the METAL BRACKETS)
1S
W
W
Finished edge
Finished edge

Step 5
å Fasten the KEYBOARD SIDES (F) to the KEYBOARD BACK (E).
Use two BROWN 1-1/2" FLAT HEAD SCREWS (P).
å Fasten the KEYBOARD BACK (E) and KEYBOARD SIDES (F)
to the KEYBOARD SHELF (C2). Use four BROWN 1-1/2" FLAT
HEAD SCREWS (P).
401442www.sauder.com/services Page 9
BROWN 1-1/2" FLAT HEAD SCREW
(6 used in this step)
P
P
P
E
F
F
C2
These holes must be here.
Finished edge
Finished edge
Finished edge
Finished surface
These surfaces
should be the
same color.

Step 6
å Fasten the HINGES (12H) to the KEYBOARD FRONT (D2).
Use four BLACK 1/2" FLAT HEAD SCREWS (T).
401442 www.sauder.com/servicesPage 10
12H
BLACK 1/2" FLAT HEAD SCREW
(4 used in this step)
T
D2