Sauder 411615 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 390060 04/20/16
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Sewing Cart
Model 411615
We'll have you in
stitches.

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
3
4
5-18
19-21
22-24
25-26
27
411615 www.sauder.com/servicesPage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C UPRIGHT (1)
D2 TOP (1)
E FLIP-UP TOP (1)
F BOTTOM (1)
G MODESTY PANEL (1)
H SHELF (1)
I BACK (1)
J CENTER DOOR (1)
K RIGHT DOOR (1)
L LEFT DOOR (1)
M ADJUSTABLE SHELF (2)
A
B
C
D2
E
F
G
H
I
J
K
L
M
M
411615www.sauder.com/services Page 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
BLACK 1-1/8" PAN HEAD SCREW - 2
FF
GOLD 1" MACHINE SCREW - 3
GG
BLACK 9/16" LARGE HEAD SCREW - 41
II
BLACK 1-7/8" FLAT HEAD SCREW - 4
EE
HH BROWN 1" FLAT HEAD SCREW - 2
BLACK 1/2" FLAT HEAD SCREW - 2
JJ
NAIL - 13
KK
TCASTER BRACKET - 6
CAM COVER - 4
P
TIGHT HINGE- 2
V
RUBBER SLEEVE - 8
SLOOSE HINGE- 2 U
METAL PIN - 8
R
KNOB - 3
Q
STRIKE PLATE - 2
Y
HIDDEN CAM - 14
N2 CAM DOWEL - 14 O2
TRAY - 2
BB TRAY DIVIDER - 8 CC
ZCASTER - 4 AA LOCKING CASTER - 2
HINGE - 5
W
MAGNETIC CATCH- 2
X
DD SLIDE CATCH - 1
411615 www.sauder.com/servicesPage 4

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Push fourteen HIDDEN CAMS (N2) into the
ENDS (A and B), UPRIGHT (C), MODESTY PANEL (G),
BOTTOM (F), and SHELF (H). Then, insert the metal end
of the CAM DOWEL (O2) into each HIDDEN CAM.
Do not tighten the HIDDEN CAMS in this step.
(14 used)
(14 used)
Arrow
N2
O2
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
411615www.sauder.com/services Page 5
A
B
C
F
G
H
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1140
to watch a video on how to assemble your unit.

å Fasten the RIGHT END (A) to the TOP (D2). Tighten two
HIDDEN CAMS.
Step 2
411615 www.sauder.com/servicesPage 6
Surface with
HIDDEN CAMS
Unfinished surface
A
D2
Finished edge
Rounded edge
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution

å Fasten the BOTTOM (F) to the RIGHT END (A). Tighten
two HIDDEN CAMS.
Step 3
411615www.sauder.com/services Page 7
Finished edge
Unfinished
surface
A
F
Arrow
Minimum
190 degrees
Maximum
210 degrees

Step 4
å Fasten the UPRIGHT (C) to the BOTTOM (F) and TOP (D2).
Tighten four HIDDEN CAMS.
å Fasten two MAGNETIC CATCHES (X) to the UPRIGHT (C).
Use two BLACK 1-1/8" PAN HEAD SCREWS (FF).
å Fasten the MODESTY PANEL (G) to the UPRIGHT (C). Use
two BLACK 1-7/8" FLAT HEAD SCREWS (EE).
411615 www.sauder.com/servicesPage 8
C
D2
F
G
X
BLACK 1-7/8" FLAT HEAD SCREW
(2 used for the MODESTY PANEL)
EE
BLACK 1-1/8" PAN HEAD SCREW
(2 used for the MAGNETIC CATCHES)
FF
Surface with HIDDEN CAMS
Arrow
Minimum
190 degrees
Maximum
210 degrees
Surface without
HIDDEN CAMS

å Fasten the SHELF (H) to the UPRIGHT (C). Use two
BLACK 1-7/8" FLAT HEAD SCREWS (EE).
å Fasten the LEFT END (B) to the TOP (D2), SHELF (H), and
MODESTY PANEL (G). Tighten six HIDDEN CAMS.
Step 5
411615www.sauder.com/services Page 9
BLACK 1-7/8" FLAT HEAD SCREW
(2 used for the SHELF)
EE
Arrow
Minimum
190 degrees
Maximum
210 degrees
B
C
D2
G
H
Unfinished
surface

å Carefully turn your unit over onto its front edges.
å Make equal margins along three edges of the BACK (I).
Push on the bottom edge of the RIGHT END and UPRIGHT
if needed to make it "square".
å NOTE: The BACK should be against the bottom surface of
the TOP.
å Fasten the BACK (I) to your unit using the NAILS (KK).
Step 6
411615 www.sauder.com/servicesPage 10
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfinished surface
NAIL
(13 used in this step)
KK
I
Edge without holes