Sauder 412301 User manual

PLEASE CONTACT US
BEFORE RETURNING
YOUR UNIT TO THE STORE
1-800-523-3987
www.sauder.com
Made in the USA
Archbold, OH
NOTE: THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
English.................... Page 2-24
Français...............Pages 25-28
Espanol.............Páginas 29-32
Lot #: 340696 09 / 02 / 11
Date Purchased: ____________________
412301
Jewelry Chest

ASSEMBLY TOOLS REQUIRED
Hammer
No. 2 Phillips Screwdriver
Straight Edge Screwdriver
Tip Shown Actual Size
TABLE OF CONTENTS
Part Identification.......................2
Hardware Identification .........3-4
Assembly Steps....................5-24
Français..............................25-28
Espanol...............................29-32
Safety .................................33-34
Warranty...................................35
PART IDENTIFICATION: While not all parts are labeled, some of the parts will have a label or an inked
letter on the edge to help distinguish similar parts from each other. Use this PART IDENTIFICATION to help
identify similar parts.
A RIGHT END 1
B LEFT END 1
C TOP 1
D BOTTOM 1
E SHELF 1
F LARGE BACK 1
G FELT BOTTOM 1
H SMALL BACK 1
I RIGHT FRONT LEG 1
J LEFT FRONT LEG 1
K BACK LEG 2
L DRAWER FRONT 4
M END MOLDING 2
N TOP MOLDING 2
O LEFT DRAWER SIDE 4
P RIGHT DRAWER SIDE 4
Q FIXED FRONT 1
R LONG DIVIDER 1
S SHORT DIVIDER 2
T DRAWER BOTTOM 4
U DRAWER BACK 4
V MIRROR 1
W EXTENSION BLOCK 4
A
B
C
DE
F
G
H
I
J
K
K
L
M
M
O
PQ
R
T
U
V
W
W
W
W
SS
NN
Page 2 www.sauder.com/services 412301

HARDWARE IDENTIFICATION
METAL BRACKET - 4
EE
METAL PIN - 1
GG
HIDDEN CAM - 16
BB
CAM COVER - 4
II
HINGE - 2
HH
SCREW COVER - 4
JJ
CAM SCREW - 8
DD
SLIDE CAM - 8
FF
LL CLIP - 8
CAM DOWEL - 8
CC
TACK GLIDE - 4
KK
BUMPER - 2
NN
KNOB - 5
MM
RIGHT CABINET
RAIL - 4
XLEFT CABINET
RAIL - 4
Y Z RIGHT DRAWER
SLIDE - 4 AA LEFT DRAWER SLIDE - 4
LID STAY - 1
OO
Page 3
www.sauder.com/services412301

Screws are shown actual size. You may receive extra hardware with your unit.
HARDWARE IDENTIFICATION
BLACK 9/16" LARGE HEAD SCREW - 12
VV
SILVER 5/8" MACHINE SCREW - 1
UU
BLACK 7/8" LARGE HEAD SCREW - 4
TT
GOLD 5/16" FLAT HEAD SCREW - 32
XX
NAIL - 32
ZZ
BLACK 1/2" FLAT HEAD SCREW - 4
YY
BLACK 9/16" FLAT HEAD SCREW - 4
WW
GOLD 1" MACHINE SCREW - 4
RR
BLACK 1-7/8" FLAT HEAD SCREW - 7
QQ
BROWN 1" FLAT HEAD SCREW - 16
SS
BLACK 1-15/16" FLAT HEAD SCREW - 2
PP
Page 4 www.sauder.com/services 412301

Look for this icon. It means a video
assembly tip is available at:
www.sauder.com/services/tips
1
1
S
t
e
p
Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
Push sixteen HIDDEN CAMS (BB) into the ENDS (A and B), BOTTOM (D), SHELF (E), and SMALL BACK (H). Then, insert a
CAM DOWEL (CC) into each HIDDEN CAM, except in the ENDS (A and B) and SMALL BACK (H).
Do not tighten the HIDDEN CAMS in this step.
Insert the CAM DOWEL into the HIDDEN CAM.
Arrow
Arrow
Arrow
(16 used)
(8 used)
Do not insert CAM DOWELS into these parts. Arrow
Arrow
Arrow
BB BB
BB
BB
BB
CC
CC
A
B
D
E
H
Page 5
www.sauder.com/services412301

2
2
S
t
e
p
Turn eight CAM SCREWS (DD) into the LEGS (I, J, and K).
(8 used)
I
J
K
K
DD
Page 6 www.sauder.com/services 412301

3
3
S
t
e
p
Fasten the FRONT LEGS (I and J) to the ENDS (Aand B). Tighten six HIDDEN CAMS.
A
B
I
JCurved edge
Curved edge
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Page 7
www.sauder.com/services412301

4
4
S
t
e
p
Carefully turn the ENDS (A and B) over.
Turn four BLACK 9/16" FLAT HEAD SCREWS (WW) into the ENDS (A and B) until the shoulder of the SCREWS rest on the
surface of the ENDS.
Slide the END MOLDINGS (M) onto the ENDS (A and B). Line up the groove in the MOLDINGS over the head of the SCREWS in
the ENDS.
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
WW
Apply pressure with your hands as
you guide the MOLDINGS over
the SCREWS and onto the ENDS.
Shoulder
These edges
should be even.
These edges
should be even. M
M
A
B
Page 8 www.sauder.com/services 412301

Carefully turn the ENDS (A and B) over.
Fasten the REAR LEGS (K) to the ENDS (A and B). Use six BLACK 1-7/8" FLAT HEAD SCREWS (QQ).
5
5
S
t
e
p
A
B
K
K
BLACK 1-7/8" FLAT HEAD SCREW
(6 used in this step)
QQ
Curved edge
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Page 9
www.sauder.com/services412301

Fasten the EXTENSION BLOCKS (W) to the ENDS (A and B). Use twelve BROWN 1" FLAT HEAD SCREWS (SS).
6
6
S
t
e
p
Finished edge
Finished edge
These holes will not be
used in this step and are
closer to the short edge.
W
W
WW
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
A
B
Page 10 www.sauder.com/services 412301
BROWN 1" FLAT HEAD SCREW
(12 used in this step)
SS
K

7
7
S
t
e
p
A
B
Fasten the CABINET RAILS (X and Y) to the EXTENSION BLOCKS (W) on the ENDS (A and B). Use sixteen GOLD 5/16" FLAT
HEAD SCREWS (XX) through holes #1 and #3.
NOTE: The CABINET RAILS are marked "CABINET RIGHT" and "CABINET LEFT" for easy identification.
GOLD 5/16” FLAT HEAD SCREW
(16 used for RAILS)
XX
1
1
1
1
2
2
2
2
3
3
3
3
Roller end
X
X
X
X
Y
Y
Y
Y
W
W
W
W
Roller end
3
3
3
3
2
2
2
2
1
1
1
1
Page 11
www.sauder.com/services412301

8
8
S
t
e
p
A
This hole
must be here.
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Finished edge
D
E
Fasten the BOTTOM (D) and SHELF (E) to the RIGHT END (A). Tighten four HIDDEN CAMS. Use a STRAIGHT EDGE
SCREWDRIVER.
Arrow
210 degrees
Curved edge
Curved edge
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Page 12 www.sauder.com/services 412301

Fasten the SMALL BACK (H) to the LEFT REAR LEG (K). Tighten the HIDDEN CAM. Use a STRAIGHT EDGE
SCREWDRIVER.
Fasten the SMALL BACK (H) to the SHELF (E). Use a BLACK 1-7/8" FLAT HEAD SCREW (QQ).
Fasten the LEFT END (B) to the BOTTOM (D), SHELF (E) and SMALL BACK (H). Tighten five HIDDEN CAMS. Use a
STRAIGHT EDGE SCREWDRIVER.
9
9
S
t
e
p
D
E
Arrow
210 degrees
BLACK 1-7/8" FLAT HEAD SCREW
(1 used in this step)
QQ
H
Surface with
HIDDEN CAMS
Curved edge
Curved edge
B
Page 13
www.sauder.com/services412301
K

10
10
S
t
e
p
Carefully turn your unit over onto its front edges. Lay the BACK (F) over the opening of the unit.
Make equal margins along the long edges of the BACK (F). Push on opposite corners of your unit if needed to make it “square”.
Fasten the BACK (F) to your unit using the NAILS (ZZ).
With a hammer, tap four TACK GLIDES (KK) into the bottom edges of the LEGS (I, J, and K).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(24 used in this step)
ZZ
K
K
I
J
KK
These edges
should be even.
Page 14 www.sauder.com/services 412301
F

Carefully stand your unit upright.
Fasten four METAL BRACKETS (EE) to the FIXED FRONT (Q). Use four BLACK 9/16" LARGE HEAD SCREWS (VV).
NOTE: Be sure the BRACKETS are even with the edges of the FIXED FRONT.
Fasten the FIXED FRONT (Q) to the ENDS (Aand B). Use four BLACK 9/16" LARGE HEAD SCREWS (VV).
Fasten a KNOB (MM) to the FIXED FRONT (Q). Use a SILVER 5/8" MACHINE SCREW (UU).
11
11
S
t
e
p
BLACK 9/16” LARGE HEAD SCREW
(8 used for the METAL BRACKETS)
VV
EE
EE
SILVER 5/8” MACHINE SCREW
(1 used for KNOB)
UU
Q
MM
A
B
Page 15
www.sauder.com/services412301

Insert the METAL PIN (GG) into the hole in the LONG DIVIDER (R).
Push the SHORT DIVIDERS (S) over the METAL PIN.
Fasten the FELT BOTTOM (G) and DIVIDERS (R and S) to the SHELF (E). Use two BLACK 1-15/16" FLAT HEAD SCREWS (PP).
12
12
S
t
e
p
GG
Finished edge
Finished edge
BLACK 1-15/16" FLAT HEAD SCREW
(2 used in this step)
PP
G
RS
S
E
Page 16 www.sauder.com/services 412301
R
S
S

Carefully lay the MIRROR (V) on the TOP (C). Fasten the TOP MOLDINGS (N) to the TOP (C) with the edge of the MIRROR in
the groove of each MOLDING. Use four BROWN 1" FLAT HEAD SCREWS (SS).
Push two BUMPERS (NN) into the holes in the TOP (C).
13
13
S
t
e
p
Surface with holes
NN
NN
N
N
V
C
BROWN 1" FLAT HEAD SCREW
(4 used in this step)
SS
Page 17
www.sauder.com/services412301

14
14
S
t
e
p
Fasten the HINGES (HH) to the SMALL BACK (H). Use four BLACK 9/16" LARGE HEAD SCREWS (VV).
Fasten the HINGES (HH) to the TOP (C). Use four BLACK 7/8" LARGE HEAD SCREWS (TT).
BLACK 9/16" LARGE HEAD SCREW
(4 used into the SMALL BACK)
VV
BLACK 7/8" LARGE HEAD SCREW
(4 used into the edge of the TOP)
TT
HH
Page 18 www.sauder.com/services 412301
C
H

Open the TOP and fasten the LID STAY (OO) to the TOP (C) and LEFT END (B). Use four BLACK 1/2" FLAT HEAD SCREWS (YY).
15
15
S
t
e
p
BLACK 1/2” FLAT HEAD SCREW
(4 used in this step)
YY OO
B
Page 19
www.sauder.com/services412301
C

16
16
S
t
e
p
Insert the DRAWER SIDES (O and P) at an angle into the slot at each end of the DRAWER FRONT (L).
Slide the DRAWER BACK (U) into the grooves in the DRAWER SIDES (O and P) until the edge of the BACK is even with the
SIDES.
Repeat this step for the remaining drawers.
*U.S. Patent No. 6,413,007
These edges
should be even.
Groove
1st
2nd
Tab
Slot
P
L
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
O
O
P
P
L
Groove
U
Page 20 www.sauder.com/services 412301