Sauder 414254 User manual

PLEASE CONTACT US
BEFORE RETURNING
YOUR UNIT TO THE STORE
1-800-523-3987
www.sauder.com
Made in the USA
Archbold, OH
NOTE: THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
English.................... Page 1-12
Français...............Pages 13-14
Espanol.............Páginas 15-16
Lot #: 347897 12 / 07 / 12
Date Purchased: ____________________
414254
Bookcase

ASSEMBLY TOOLS REQUIRED
Hammer
No. 2 Phillips Screwdriver
Tip Shown Actual Size
TABLE OF CONTENTS
Part Identification.......................3
Hardware Identification .............4
Assembly Steps....................5-12
Français..............................13-14
Espanol...............................15-16
Safety .................................17-18
Warranty...................................19
Page 2 www.sauder.com/services 414254

A END 2
B UPRIGHT 1
C TOP 1
D BOTTOM 1
E BACK 4
F SHELF 6
G STORAGE BIN 2
H STORAGE BIN BOTTOM 2
Page 3
www.sauder.com/services414254
PART IDENTIFICATION: While not all parts are labeled, some of the parts will have a label or an inked
letter on the edge to help distinguish similar parts from each other. Use this PART IDENTIFICATION to help
identify similar parts.
A
B
C
D
E
F
G
H
E
E
E
A
F
F
F
F
F

HARDWARE IDENTIFICATION
Screws are shown actual size. You may receive extra hardware with your unit.
Page 4 www.sauder.com/services 414254
BLACK 2-1/4" FLAT HEAD SCREW - 2
26S SILVER 1-1/4" PAN HEAD SCREW - 12 45S
HIDDEN CAM - 30
1F CAM DOWEL - 30 2F
CAM COVER - 6
13P
NAIL - 56
1N
84S BLACK 3” PAN HEAD SCREW - 4
FOOT - 4
21E

Look for this icon. It means a video
assembly tip is available at:
www.sauder.com/services/tips
1
1
S
t
e
p
Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
Push thirty HIDDEN CAMS (1F) into the ENDS (A), UPRIGHT (B), and SHELVES (F). Then, insert the metal end of a CAM
DOWEL (2F) into each HIDDEN CAM.
Page 5
www.sauder.com/services414254
Do not tighten the HIDDEN CAMS in this step.
Arrow
(30 used)
Arrow Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
1F
B
F
A
A
F
F
F
F
F
2F
1F
2F

2
2
S
t
e
p
Page 6 www.sauder.com/services 414254
Caution
Risk of damage or
injury. Hidden Cams
must be completely
tightened. Hidden
Cams that are not
completely tightened
may loosen, and parts
may separate.
To completely tighten:
Start Tighten
Arrow
Arrow
Maximum
210 degrees
Minimum
190 degrees
Fasten the SHELVES (F) to the UPRIGHT (B). Tighten twelve HIDDEN CAMS.
B
F
F
F
F
F
F
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Edge with HIDDEN CAMS
These edges
should be even.

Fasten the ENDS (A) to the SHELVES (F). Tighten twelve HIDDEN CAMS.
3
3
S
t
e
p
Page 7
www.sauder.com/services414254
Maximum
210 degrees
Minimum
190 degrees
Arrow
F
F
F
F
F
F
A
A
Surface with
HIDDEN CAMS
Surface without
HIDDEN CAMS
Edge with HIDDEN CAMS
Edge with HIDDEN CAMS

Fasten the TOP (C) to the ENDS (A) and UPRIGHT (B). Tighten six HIDDEN CAMS.
4
4
S
t
e
p
Page 8 www.sauder.com/services 414254
Maximum
210 degrees
Minimum
190 degrees
Arrow
A
A
B
C
Surface with holes

Fasten the BOTTOM (D) to the UPRIGHT (B). Use two BLACK 2-1/4" FLAT HEAD SCREWS (26S).
5
5
S
t
e
p
Page 9
www.sauder.com/services414254
BD
BLACK 2-1/4" FLAT HEAD SCREW
(2 used in this step)
26S
Surface with
more holes

Fasten the BOTTOM (D) to the ENDS (A). Use four BLACK 3" PAN HEAD SCREWS (84S) through the FEET (21E), through the
BOTTOM, and into the ENDS.
Fasten the FEET (21E) to the BOTTOM (D). Use twelve SILVER 1-1/4" PAN HEAD SCREWS (45S).
6
6
S
t
e
p
Page 10 www.sauder.com/services 414254
D
A
A
BLACK 3” PAN HEAD SCREW
(4 used in this step)
84S
SILVER 1-1/4" PAN HEAD SCREW
(12 used in this step)
45S
21E
21E
21E
21E
Surface with silver
screw threads