Sauder 412720 User manual

sauder.com
Coee
Table/TV Stand
Model 412720
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-9
Français pg 10-11
Español pg 12-13
Lot # 531641 07/16/19
Purchased: __________________
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Share your journey!
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Guaranteed to hold
other beverages, too.

Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Table of Contents Assembly Tools Required
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
3
4
5-9
10-11
12-13
14
15
Use of a TV that is too heavy or large is hazardous. A TV that is too heavy will create a risk of a tip-over that can cause severe injury or
death. A TV that is too large for the available space might be accidentally pushed or bumped o the furniture, or subject to tip-over.
• Check the size and weight of your TV. Compare it to the diagram below – before you begin assembly!
• This Sauder unit is designed for use with flat panel televisions weighing less than 70 pounds. Never use with a TV that weighs more.
• The size of the television, front-to-back and side-to-side, must fit within the space defined in the diagram.
• Never place the front edge of the TV past the front edge of the TV support shelf (or stop molding – if equipped)
• Never allow the sides of the TV to extend past the side edges of the TV support surface.
• Be sure to apply the warning label as instructed later in the assembly. The label provides important safety related information.
WARNING
!
70 lbs.
70 lbs.
40"
40"
21-1/2"
21-1/2"
412720 www.sauder.com/servicePage 2

Part Identification
åUse this part identification to help identify the parts.
A TOP (1)
B BOTTOM (1)
C LEG FRAME (LEFT AND RIGHT) (2)
D LOWER CONNECT TUBE (2)
E UPPER CONNECT TUBE (2)
F MIDDLE CONNECT TUBE (2)
A
B
C
D
E
F
C
E
F
D
412720www.sauder.com/service Page 3

Hardware Identification
åBolts and screws are shown actual size. You may receive extra hardware with your unit.
METAL BRACKET - 8
GCASTER - 4 HNUT - 4 I
HEX WRENCH - 1
JALLEN WRENCH - 1 K
1-3/4" BOLT - 4
L1-9/16" MACHINE SCREW - 4
M
1" PAN HEAD SCREW - 4
N1/2" BOLT - 8
O
5/16" PAN HEAD SCREW - 24
PWARNING LABEL - 1 Q
522,68 22,68
70 lbs. 31,75 kg 31,75 kg
412720 www.sauder.com/servicePage 4

Step 1
å Assemble your unit on a carpeted floor or on the empty carton
to avoid scratching your unit or the floor.
å Fasten four METAL BRACKETS (G) to the LOWER CONNECT
TUBES (D). Use four 5/16" PAN HEAD SCREWS (P).
å Fasten the MIDDLE CONNECT TUBE (F) to the UPPER
CONNECT TUBES (E). Use four 5/16" PAN HEAD SCREWS (P).
412720www.sauder.com/service Page 5
P
G
D
D
E
E
F
The holes should be
closer to this edge.
The holes should be
closer to this edge.
The holes should be
closer to this edge.
5/16" PAN HEAD SCREW
(8 used in this step)
P

å Fasten the LOWER CONNECT TUBES (D) to the BOTTOM (B).
Use four 5/16" PAN HEAD SCREWS (P).
å Fasten the MIDDLE CONNECT TUBE (F) to the LOWER
CONNECT TUBES (D). Use four 5/16" PAN HEAD SCREWS (P).
å Fasten the MIDDLE CONNECT TUBE (F) to the BOTTOM (B).
Use two 1" PAN HEAD SCREWS (N).
Step 2
412720 www.sauder.com/servicePage 6
D
D
B
F
5/16" PAN HEAD SCREW
(8 used in this step)
P
1" PAN HEAD SCREW
(2 used in this step)
N

å Warning: Do not completely tighten the Bolts and Screws in
this step.
å Fasten the LEG FRAMES (C) to the CONNECT
TUBES (D and E). Use eight 1/2" BOLTS (O) and the
ALLEN WRENCH (K).
å Fasten four METAL BRACKETS (G) to the LEG FRAMES (C).
Use four 5/16" PAN HEAD SCREWS (P).
Step 3
412720www.sauder.com/service Page 7
5/16" PAN HEAD SCREW
(4 used in this step)
P
1/2" BOLT
(8 used in this step)
O
D
E
B
D
K
C
C
P
G
E

å Fasten the METAL BRACKETS (G) to the BOTTOM (B). Use
four 5/16" PAN HEAD SCREWS (P).
å Fasten the LEG FRAMES (C) to the TOP (A). Use four 1-9/16"
MACHINE SCREWS (M) and the ALLEN WRENCH (K).
å Fasten the MIDDLE CONNECT TUBE (F) to the TOP (A). Use
two 1" PAN HEAD SCREWS (N).
Step 4
412720 www.sauder.com/servicePage 8
5/16" PAN HEAD SCREW
(4 used in this step)
P
1" PAN HEAD SCREW
(2 used in this step)
N
A
F
C
C
BLACK 1-9/16" LARGE HEAD SCREW
(4 used in this step)
M
G
K
B

å Tighten all Bolts and Screws from previous steps.
å Fasten four CASTERS (H) to the LEG FRAMES (C). Use four 1-3/4" BOLTS (L), four NUTS (I), and the HEX WRENCH (J).
å Carefully stand your unit upright.
å Apply the WARNING LABEL (Q) to the TOP (A). You should be able to read the label when the TV is removed from the
unit. When the TV is in place, it should hide the label. Peel o the backing and apply the label as shown in the diagram.
å NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å NOTE: Please read the back pages of the instruction booklet for important safety information.
å This completes assembly. Clean with a damp cloth. Wipe dry.
Step 5
412720www.sauder.com/service Page 9
H
H
H
H
J
L
I
C
C
A
Q
1-3/4" BOLT and NUT
(4 used in this step)
LI
70 lbs.
50 lbs.
And to celebrate, why not share your success story at Walmart.com or
522,68 22,68
70 lbs. 31,75 kg 31,75 kg

LISTE DE PIÈCES
REFERENCE DESCRIPTION QUANTITÉ
LISTE DE PIÈCES
REFERENCE DESCRIPTION QUANTITÉ
NOUS CONTACTER EN PREMIER
AVANT D'EFFECTUER TOUT RETOUR AU MAGASIN.
Nous faisons de notre mieux pour nous assurer que votre meuble
arrive dans d’excellentes conditions. Nos représentants du service
Clientèle sont aimables et prêts à vous aider au cas où une pièce
aurait été endommagée ou manquerait (ou si vous aviez besoin
d’aide pour l’assemblage). Composez ce numéro d’appel gratuit:
1-800-445-1527
Du lundi au vendredi, de 9 heures du matin à
5:30 heures du soir (horaire Côte Est)
(sauf jours fériés)
Si une pièce a besoin d’être remplacée, la pièce de remplacement
sera envoyée dans les 48 heures. (Sauf week-ends et jours fériés)
Utilisez les instructions d’assemblage en français avec les
schémas étape par étape du manuel d’instruction en anglais.
Chaque étape en français correspond à la même étape en
anglais. Comparer la “Liste de pièces” ci-dessous avec la “PART
IDENTIFICATION” du manuel en anglais pour vous familiariser
avec les pièces avant l’assemblage.
REMARQUE : CE MANUEL D’INSTRUCTIONS CONTIENT
D’IMPORTANTES INFORMATIONS RELATIVES À LA SÉCURITÉ.
À LIRE ET CONSERVER POUR TOUTE RÉFÉRENCE FUTURE.
Noter la date d’achat
de cet élément et
conserver le livret pour
future référence. Pour
contacter Sauder en
ce qui concerne cet
élément, faire référence
au numéro de lot et
numéro de modèle en
appelant notre numéro
sans frais.
Lot nº : ____________
Date de
l'achet : ____________
Table de salon/Meuble Télé
G CONSOLE EN MÉTAL.............................................8
H ROULETTE .......................................................................4
I ÉCROU ................................................................................4
J CLÉ HEX..............................................................................1
K CLÉ ALLEN........................................................................1
L BOULON 44 mm.........................................................4
M VIS À MÉTAUX 40 mm...........................................4
N VIS TÊTE GOUTTE DE SUIF 25 mm..........4
O BOULON 13 mm..........................................................8
P VIS TÊTE GOUTTE DE SUIF 8 mm...........24
Q ÉTIQUETTE DE MISE EN GARDE....................1
(Consulter la dernière étape pour
l'emplacement et application appropriées)
A DESSUS...............................................................................1
B DESSOUS...........................................................................1
C CADRE DE PIED
(GAUCHE et DROIT).................................................2
D TUBE DE CONNEXION INFÉRIEUR................1
E TUBE DE CONNEXION SUPÉRIEUR.............1
F TUBE DE CONNEXION INTERMÉDIAIRE..1
Modèle 412720
412720 www.sauder.com/servicePage 10