Sauder 414129 User manual

sauder.com
Twin Platform Bed
with Headboard
Parklane Collection | Model 414129
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-20
Français pg 21-23
Español pg 24-26
Lot # 530074 05/28/19
Purchased: __________________
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Share your journey!
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-523-3987.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
WARNING
CHOKING HAZARD - Small Parts
Not for children under 3 years.
Adult assembly required.

Table of Contents Assembly Tools Required
3
4
5-20
21-23
24-26
27
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
414129 www.sauder.com/servicePage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A3 RIGHT END (1)
B3 LEFT END (1)
E3 HEADBOARD TOP (1)
I3 SLAT (2)
N2 LEFT FOOTBOARD RAIL (1)
O2 RIGHT FOOTBOARD RAIL (1)
Q SUPPORT (4)
R FOOTBOARD (1)
S HEADBOARD (1)
T LEFT HEADBOARD RAIL (1)
U RIGHT HEADBOARD RAIL (1)
V LEFT/RIGHT BACK (2)
W PLATFORM (3)
X SMALL SUPPORT (4)
Y LARGE SUPPORT (2)
Z CENTER BACK (1)
Now you know
our ABCs.
414129www.sauder.com/service Page 3
A3
B3 X
Y
E3
Z
U
Q
W
R
S
T
N2
V
V
W
W
I3
I3
Y
Q
Q
Q
X
X
O2
X

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
414129 www.sauder.com/servicePage 4
Z-PLATE - 2
75G FELT DISC CARD - 2
1M
HIDDEN CAM - 4
1F WOOD DOWEL - 2 15F BI-CAM DOWEL - 2 25F
METAL PIN - 8
1R
BLACK 9/16" LARGE HEAD SCREW - 36
1S 12S BROWN 1" FLAT HEAD SCREW - 52
BLACK 1-1/2" FLAT HEAD SCREW - 16
101S BLACK 1-15/16" FLAT HEAD SCREW - 20 113S

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
å Assemble your unit on a carpeted floor or on the empty carton
to avoid scratching your unit or the floor.
å Push four HIDDEN CAMS (1F) into the RAILS (N2, O2, T, and U).
414129www.sauder.com/service Page 5
U
T
N2
O2
Arrow
1F
Arrow
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole

Step 2
å Fasten two of the SMALL SUPPORTS (X) to the
FOOTBOARD RAILS (N2 and O2). Use twelve
BROWN 1" FLAT HEAD SCREWS (12S).
å NOTE: Start each SCREW a few turns before
tightening any of them.
414129 www.sauder.com/servicePage 6
N2
O2
X
X
The HIDDEN CAM
must be here.
These holes
must be here.
These holes
must be here.
Finished edge
BROWN 1" FLAT HEAD SCREW
(12 used in this step)
12S
Surface with
HIDDEN CAM
Surface with
HIDDEN CAM
Some assembly
(and snacks) required.

å Fasten the SUPPORTS (Q) to the LARGE SUPPORTS (Y),
FOOTBOARD (R), and HEADBOARD (S). Use twenty
BROWN 1" FLAT HEAD SCREWS (12S).
å NOTE: Use the center two holes in the SUPPORTS (Q) that
will be fastened to the LARGE SUPPORTS (Y).
å NOTE: Start each SCREW a few turns before tightening
any of them.
Step 3
414129www.sauder.com/service Page 7
Y
R
S
Y
Q
Q
Q
Q
BROWN 1" FLAT HEAD SCREW
(20 used in this step)
12S
Surface with more holes
Unfinished edge
Unfinished edge

Step 4
å Fasten the HEADBOARD RAILS (T and U) to the ENDS (A3
and B3). Use eight BROWN 1" FLAT HEAD SCREWS (12S).
å NOTE: Start each SCREW a few turns before tightening any
of them.
414129 www.sauder.com/servicePage 8
A3
B3
U
T
Surface with
HIDDEN CAM
Surface with
HIDDEN CAM
The HIDDEN CAM
must be here.
The HIDDEN CAM
must be here.
Curved edge
Surface with more holes
Curved edge
BROWN 1" FLAT HEAD SCREW
(8 used in this step)
12S
12S

å Fasten the remaining two SMALL SUPPORTS (X) to the
HEADBOARD RAILS (T and U). Use twelve BROWN 1"
FLAT HEAD SCREWS (12S).
å NOTE: Start each SCREW a few turns before tightening
any of them.
Step 5
414129www.sauder.com/service Page 9
U
T
X
X
BROWN 1" FLAT HEAD SCREW
(12 used in this step)
12S
These holes
must be here.
These holes
must be here.

Step 6
å Peel the FELT DISCS from the FELT DISC CARDS (1M)
and stick them onto the edges of the ENDS (A3 and B3),
LARGE SUPPORTS (Y), and FOOTBOARD (R) as shown.
414129 www.sauder.com/servicePage 10
Y
R
Y
A3
B3
1M
1M
Long finished edge