Sealey MCW360 User manual

INSTRUCTIONS FOR:
MOTORCYCLE PORTABLE FOLDING WORKBENCH
360KG
MODEL NO: MCW360
3 Ensure safety strap is securely fitted before moving workbench.
3 Select a work area suitable for the workbench and keep the area clean, tidy and free from unrelated materials. Ensure there is adequate
lighting.
3 Stand the workbench on a stable surface strong enough to take the weight of the workbench and the motorcycle.
3 Ensure that the motorcycle is secure and stable before beginning to work on it.
3 The maximum motorcycle weight is 360kg. DO NOT exceed this rated capacity.
3 Maintain the workbench in good condition.
3 Replace or repair damaged parts. Use recommended parts only, unauthorised parts may be dangerous and will invalidate the warranty.
3 Remove ill fitting clothing, remove ties, watches, rings and other loose jewellery and contain long hair.
3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3 Keep children and unauthorised persons away from the work area.
 DO NOT attempt to ride a motorcycle up onto the workbench.
Lightweight, folding design with transportation wheels makes this work bench totally mobile for use anywhere. With a working height of 460mm, it
is ideal for servicing/maintenance. Additionally the loading ramp doubles as a convenient workshop stool. Folding design allows compact storage
where workshop space is limited. Suitable for professional workshops, mobile mechanics, enthusiasts, track days or as a display table in
showrooms.
Model No: ............................MCW360
Maximum Load Capacity:...................360kg
Maximum Height: ........................460mm
Platform Width/Length:..............600 x 2200mm
Ramp Length:..........................1100mm
Folded Dimensions (L x W x D): . 1100 x 600 x 150mm
Weight: ..................................38kg
4.1. Wheel workbench to its desired location.
4.2. Withassistancelaytheworkbenchontheground,undothesafetystrapandopenthetwohalvesoutat.Themiddlelegwilldeployitself.
4.3. RemovetheRclipfromthepinonthemiddleofthelegbrace.Removethepin,seeg.1.
4.4. FoldoutthelegperpendiculartotheworkbenchandsecurethelegbraceusingthepinandRclip,seeg.2.
4.5. Repeat operations 4.3. and 4.4. for the other leg.
4.6. With assistance, turn the workbench the right way up. Note: Take care that the loading ramp does not swing out whilst the workbench is being
turned the right way up.
4.7. Fold the loading ramp down.
4.8. Workshop Stool
4.8.1.RemovetheRclipsandpinswhichholdtheloadingramptotheworkbench,seeg.3.
4.8.2. Turn the loading ramp over and remove the R clip and pin to let the legs unfold. Turn the right way up.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
4. OPERATION
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
g.2
g.1
Original Language Version MCW360 Issue: 1 - 29/08/14
© Jack Sealey Limited

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
[e-mail]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version MCW360 Issue: 1 - 29/08/14
© Jack Sealey Limited
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
g.3
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
email [e-mail] or telephone [phone].