Sealey SWT1120 User manual

WELDING TABLE 1120 X 610MM
MODEL NO: SWT1120
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9Select a work area suitable for the table and keep the area clean, tidy and free from unrelated materials. Ensure there is adequate
9lighting.
9Stand the table on a stable floor strong enough to take the weight of the table.
9Maintain the table in good condition.
9Replace or repair damaged parts. Use recommended parts only, unauthorised parts may be dangerous and will invalidate the warranty.
9Remove ill fitting clothing, remove ties, watches, rings and other loose jewellery and contain long hair.
9Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9Keep children and unauthorised persons away from the work area.
2. INTRODUCTION
Heavy-duty galvanised welding table with 30mm MIG torch mounting point. Portable and foldable for ease of transportation and storage when
not in use. Sturdy locking pin system and adjustable foot for eliminating wobble when in use.
3. SPECIFICATION
Model no .................................................................SWT1120
Size folded ............................................ 1120 x 610 x 915mm
Weight capacity............................................................ 100kg
4. OPERATION
4.1. Laytableupsidedownonoor.Removelegsecuringpin,(seeg.1).
4.2. Pullinnerleg(theonewiththeheightadjustingbolt),upandovertoerectlegs.
4.3. Oncethelegsreachtheirstop,reinsertthepinand‘R’clipinitsend,tosecurethelegsinposition,(seeg.2).
4.4. Get the help of an assistant to turn the table the right way up.
4.5. Use the height adjusting bolt to stabilise the table before using.
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
fig.1
fig.2
fig.3
SWT1120Issue:3(3)|15/04/20

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Original Language Version
© Jack Sealey Limited SWT1120Issue:3(3)|15/04/20