Seca CT3000/P80 Administrator Guide

How to Replace Your
Seca CT3000/P80 ECG Paper
Remove any remaining paper
Place the new pack of paper in the paper
tray and pull the paper to the right
Ensure the blank side is facing upwards
Flip the paper so it is positioned the to
the left
Ensure...
The printed (grid) side is facing up
The black markers are at the top
There is no thick red line visible on the
bottom of the paper
For service support please contact us on;
Tel: [phone] Email: [e-mail]
For paper supplies please contact our sales department
Product code: MT165 Tel: [phone] Email: [email protected]
IMOTEK International Ltd
Imotek House, West Newlands Ind. Estate, Somersham, Huntingdon, Cambridgeshire, PE28 3FF

Please print and cut out the instructions below. These can be stuck to the bottom of the paper tray for
future reference.
When Inserting ECG Paper Ensure...
•The printed (grid) side is facing up
•The black markers are at the top
•Paper is positioned to the left
•There is no thick red line visible on the
bottom of the paper