Sega CAPTO CRANE User manual

BC
tJCllJ
I
•
·
0
e
c
J
a
0
p
D

't'Machine operating instructions
O840*W812*H21 00MM
Product Name: Capto Crane Type
: Claw CraneMachine
Model: MK-I
Machine voltage power: 110V/220V @200w
Specification Version:Ver1 .2
System version: SG401
Please refer to the detailed instructions before use ,and please keep the manual for future
reference
The product you actually receive may be slightly different from the one shown in this instruction, and tt,e contents of
this instruction may not be changed as a result of the product update.
1

BEFOREUSINGTHEPRODUCT, BE SURE TO READ THE FOLLOWING:
TO MAINTAIN SAFETY:
To ensure the safe operation of this product, be sure to read the following before usage:
The following instructions are intended for the users, operators and the personnel in charge of the operation of the
product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product
appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially
hazardous degrees, the terms of "DANGER", "WARNING", "CAUTION", etc. are used. Be sure to understand the
contents of the displays before reading the text.
Indicates that mishandling the product by disregarding this pictograph will cause severe
injury or death
Indicates that mishandling the product by disregarding this warning will cause a potentially
hazardous situation which can result in death or serious injury
Indicates that mishandling the product by disregarding this caution will cause a slight
hazardous situation which can result in personal injury and/or material damage
For the safe usage of the product, the following pictographs are used:
Indicates "HANDLE WITH CARE". In order to protect the human body and equipment, this display is
attached to places where the instruction manual should be referred to
Indicates a "protective earth terminal." Before operating the equipment, be sure to connect it to the
ground (this step may be omitted for products in which a power cable with earth is used)
•
PERFORM WORK IN ACCORDANCE WITH THE INSTRUCTIONS HEREIN STATED
Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work
as per the instructions can cause accidents. In the case where only those who have technical expertise should
perform the work to avoid hazardous situation, the instructions herein
state that the site maintenance personnel should perform such work
•
BE SURE TO TURN OFF THE POWER BEFOREWORKING ON THE MACHINE
To prevent an electric shock, be sure to turn off the power and unplug the power cable before carrying out any
work that requires direct contact with the interior of the product. If the work is to be performed in the power-on
status, the instruction manual herein always states to that effect
•
BE SURE TO GROUND THE EARTH TERMINAL (THIS IS NOT REQUIRED IN THE CASE WHERE A
POWER CABLE WITH EARTH ISUSED)
This product is equipped with the earth terminal. When installing the product, connect the earth terminal to the
"accurately grounded indoor earth terminal" by using an earth wire. Unless the product is grounded
appropriately, the user can be subject to an electric shock. After performing repair, etc. for the control
equipment, ensure that the earth wire is firmly connected to the control equipment
•
ENSURE THAT THE POWER SUPPLY USED IS EQUIPPED WITH AN EARTH LEAKAGE BREAKER
Using a power supply which is not equipped with the earth leakage breaker can cause a fire when earth leakage
occurs
•
BESURE TOUSE FUSES WHICH MEET THE SPECIFIED RATING (ONLYFOR THE MACHINES
WHICH USEFUSES)
Using fuses exceeding the specified rating can cause a fire and an electric shock

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION
•
SPECIFICATION CHANGES (REMOVAL OF EQUIPMENT, CONVERSIONS AND ADDITIONS)NOT
DESIGNATED BY SEGA ARE NOTALLOWED
The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous
to operate the product by removing parts and/or modifying the circuits. Should doors, lids and protective parts be
damaged or lost, refrain from operating the product, and contact where the product was purchased from or the
office herein stated.
SEGA shall not be held responsible for any accidents or compensation for damage to a third party
resulting from the specifications not designated by SEGA
•
ENSURETHATTHEPRODUCTMEETSTHEREQUIREMENTSOFAPPROPRIATEELECTRICAL
SPECIFICATIONS
Before installing the product, check for electrical specifications. SEGA products have a nameplate on which the
electrical specifications are described. Ensure that the product is compatible with the power supply voltage and
frequency requirements of the location. Using any electrical specifications different from the designated
specifications can cause a fire and an electric shock
•
INSTALLAND OPERATETHE PRODUCT IN PLACES WHERE APPROPRIATE LIGHTING IS
AVAILABLE, ALLOWING WARNING LABELS TO BECLEARLY READ
To ensure safety for the customers, labels and printed instructions describing potentially hazardous situations are
applied to places where accidents can be caused. Ensure that where the product is operated has sufficient lighting
allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with
where the product was purchased from or the office herein stated
•
WHEN HANDLING THE MONITOR, BE VERY CAREFUL (APPLIES ONLY TO PRODUCTSWITH
MONITORS)
Some of the monitor parts are subject to high tension voltage. Even after turning off the power, some portions
are still subject to high tension voltage. Monitor repair and replacement should be performed only by those
technical personnel who have knowledge of electricity and technical expertise
•
BE SURE TO ADJUST THE MONITOR PROPERLY(APPLIES ONLYTO PRODUCTS WITH MONITORS)
Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the monitor not
properly adjusted may cause dizziness or a headache to an operator, a player, or customer
•
WHEN TRANSPORTING OR RESELLING THIS PRODUCT, BE SURE TO ATTACHTHIS MANUAL TO
THE PRODUCT
*
In the case where commercially available monitors and printers are used in this product, only the contents relating
to this product are explained herein. Some commercially available equipment has functions and reactions not
stated in this manual. Read this manual together with the specific instruction manual of such equipment
*
Descriptions herein contained may be subject to improvement changes without notice
*
The contents described herein are fully prepared with due care. However, should any question arise or errors
be found, please contact SEGA
Normally, at the time of shipment, SEGA products are in a state allowing for usage immediately after transporting
to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on the power,
check the following points to ensure that the product has been transported in a satisfactory status:
Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are casters
and/or adjusters damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct way, connector
connections cannot be made accurately. Do not insert connectors forcibly.
Do power cables have cuts and/or dents? Are all
accessories available?
Can all doors and lids be opened with the accessory keys? Can doors and lids be firmly closed?

Indicates important information that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.
Indicates a warning or caution that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.
INTRODUCTION
This manual is intended to provide detailed descriptions together with all necessary information covering the general operation of electronic
assemblies, electromechanical, servicing control, spare parts, etc. for the product:
" Capto Crane "
This manual is intended for the owners, personnel managers in charge of operation of this product. Operate the product
after carefully reading and sufficiently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician to touch the internal system.
Turn off the power to the machine, making sure to unplug the electrical cord from the outlet, and contact the office listed below or the point-of-
purchase for this product.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special attention are indicated by
bold text, the words "STOP, IMPORTANT or CAUTION” and the symbols below.
Sega Amusements Europe Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
European Sales:
[phone]
Facsimile:
[phone]
USA Sales:
+00 (1) 224 265 4287
STS (Spares):
[phone]
Facsimile:
[phone]
email:
[email protected]
Web:
http://www.segaarcade.com
Standard Cabinet
Machine Dimensions:
Machine Height:
Machine Weight:
Power, maximum current:
Rating:
SPECIFICATIONS
0.82m[Width] x 0.84m [Depth]
2.09m (Installed)
130kg Approx. (Installed)
1A @220V / 1.8A @115VAC
110vac @ 50/60Hz –220W (consumption)
iii
INTRODUCTION

Procedures not described in this manual or marked as ‘to be carried out by site
maintenance personnel or other qualified professionals’ should not be carried
out by personnel without the necessary skill or technological experience. Work
carried out by unqualified persons may cause serious accidents, including
electrocution.
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualified professionals. This manual includes directions for potentially dangerous procedures which should
only be carried out by professionals with the appropriate specialised knowledge.
The site maintenance personnel or other qualified professionals mentioned in this manual are defined as follows:
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-
vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by
carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable
parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualified professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-
nance of amusement equipment. The individual should have either graduated from technical school or hold similar
qualifications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualified professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
iv
Definition of 'Site Maintenence Personnel’ or Other Qualified Individuals
INTRODUCTION

Battery Recycling Statement.
The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based
manufacturers and importers of Electrical and Electronic Equipment (EEE) to ensure waste equipment is disposed of
in accordance with the directive at the end of their useful life.
The symbol shown below will be placed on all products manufactured from 13th August 2005, which indicates this
product must NOT be disposed of with other normal waste. Upon purchasing any EEE from SEGA Amusements
International Ltd. The user accepts responsibility to dispose of their waste equipment by arranging to return it to a
designated UK collection point (AATF) or an Approved Exporter (AE) for the correct recycling of waste electrical
and electronic equipment.
For more information on Approved Authorised Treatment Facilities (AATF) within the UK please consult the
government website www.gov.uk
For users outside of the UK EEE should be disposed of in accordance with the local policy on the recycling of Waste
Electrical and Electronic Equipment.
The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on
the environment and encourage the recovery of the materials they contain. To achieve increased collection and
recycling of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and
importers of portable, industrial and automotive batteries.
The symbol shown below will be on all equipment fitted with batteries from 26th September 2008 and indicates
they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used
batteries by arranging to return them to a designated collection point for the correct recycling.
For more information about where you can send your waste batteries for recycling contact your local authority
office.
REGISTERED IN ENGLAND REGISTERED NO. 1711515
REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY
v
Waste of Electrical and Electronic Equipment (WEEE) Statement.
INTRODUCTION

DANGER
High voltage can cause
an electric shock.
Remove power before
servicing. 440-DS0010UK
WARNING
RISK OF SHOCK
Do Not Open!
Authorised Personnel
Only
440-WS0005UK
WARNING
RISK OF SHOCK
Do Not Open!
Authorised Personnel
Only
440-WS0005UK

f Table ofContents
1. Gameplay
03
2. System settings
04
2.1 A Check Ledger 04
2.2 B Game Set 04
2.3 C Crane Set
05
2.4 D Advanced Set
06
2.5 E Sound Set
07
2.6 F System Reset
07
3. Error code
07
4. Simple problem elimination
08
5. Wiring instructions
10
6. Mainboard wiring position description
11
7. Intetiace description
12
2

'f'Gameplay
'("
· A fte r the coin has satisfied the number of credits required f or a
game, start the game by operating the joystick.
'("
Operatethejoystickdirectiontocontrolthecranetoaimabove
your selected target and release the joystick. When you start to move
the joystick, the LCD screen will start to display the game time
countdown.
'(" When you press the Item button or the game time countdown is
over, the claw hook begins drop the claw.
f If the game has the " Grab At Once" enabled, you can press the Get
Item button again to immediately perform claw closing in the air
before the claw hook reaches the bottom.
'("
After the claw reaches the top the claw stops
and then it moves towards the prize chute to release any item it has
caught
3