Switching characteristics
The optimum emitted light is selected automatically (at RGB variants).
Static teach-in: light/dark setting is defined using teach-in sequence.
Keylock (activation and deactivation): Press and hold the Teach-in pushbutton > 10 s.
Teach-in failure: The Q-LED (yellow) flashes and all LEDs flash on the bar graph (green).
Dark switching Light switching
Example
Output Q Output Q
Internal signal
received
Switching
threshold
Switching
threshold
Internal signal
received
When setting the contrasts to be
detected, the first LED (green)
flashes in the bar graph.
Press Teach-in pushbutton.
Suitable for manual positioning of the object to be detected, e.g. marks and background.
1. Position mark
When setting the contrasts to be
detected, the second LED (green)
flashes in the bar graph.
Press Teach-in pushbutton.
2. Position background
