SOMFY Sonesse 50 User manual

Sonesse 50 RS485
Ref. 5106225B
EN Instructions
AR 
www.somfy.com

1
EN
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
CONTENT
1.  1
1.1 Fields of application 1
1.2 liability 2
2.  2
2.1. Installation 2
2.2. Wiring 3
2.3. Commissioning 5
2.4. Tips and recommendations for
installation 5
3.  6
3.1. operation 6
3.2. Tips and recommendations for use 6
4.  6
ORIGINAL GUIDE
1. FIELDS OF APPLICATION AND LIABILITY
1.1 FIELDS OF APPLICATION
The Sonesse 50 drive is designed to drive all types of indoor awning
(roller blinds, boat blinds, Roman blinds, Venetian blinds and projection screens), excluding
pantographs.
The Sonesse 50 drive is designed to drive multi-banding roller blinds.
The Sonesse 50 drive is designed to drive several roller blinds simultaneously, where these are
interconnected by a drive bracket.
The Sonesse 50 drive is not designed to be used with a compensating spring.

The Sonesse 50 drive is not designed for outdoor awnings (e.g. outdoor vertical blinds, roller
shutters, etc.)
The Sonesse 50 drive has been developed to meet indoor awning drive requirements.
Its quiet operation ensures user comfort and well-being.
For more information, and to optimise the acoustic performance of your indoor awning, please
contact a Somfy adviser.
This operating and installation guide applies to all Sonesse 50 drive torque/speed, control
technology and motor head (star head or round head) versions.

2
EN
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
1.2 LIABILITY
Before installing and using the Sonesse 50 drive, please read   
. In addition to following the instructions given in this guide, the instructions
detailed in the attached  document must also be observed.




Such use, and any failure to comply with the instructions given in this guide and in the attached
 document, absolves Somfy of any liability and invalidates the warranty.
The installer must inform its customers of the operating and maintenance conditions for the
Sonesse 50 drive and must provide them with the instructions for use and maintenance, and
the attached  document, after installing the Sonesse 50 drive. Any After-
Sales Service operation on the Sonesse 50 drive must be performed by a drive and home
automation professional.
If in doubt when installing the Sonesse 50 drive, or to obtain additional information, contact a
Somfy adviser or go to the website www.somfy.com.
2. INSTALLATION
1)
L1
L1 = …
2)
Ø > 47 mm
c
Ø = 47 mm

3)
1) 2)
e
Safety warning! Information
Caution!
Instructions which   be followed by the drive and home automation professional
installing the Sonesse 50 drive.
Never drop, knock, drill or submerge the drive.
Install a separate control point for each drive.
2.1. INSTALLATION

1) Fit the accessories required to integrate the drive in the

on the drive.
and the drive wheel con the drive.
2) Measure the length (L1) between the inner edge of the
drive head and the rim of the drive wheel.

1) Cut the roller tube to the required length, depending on
the motorised product.
2) Deburr the roller tube and remove the swarf.
3) For roller tubes which are smooth inside, cut a notch

= 4 mm /0.16 In ; e= 28 mm /1.1 In.




3
EN
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
15 mm
5 mm
20 mm
L1
1)
2)
1)
2)
h

ab
Ø>47mm
ehe
h
f
ab
Ø>47mm
ehe
h

1) Slide the drive into the roller tube.
For roller tubes which are smooth inside, position the
notch previously cut on the boss on the crown.
2) The drive wheel must be locked in place to prevent it

• 
drive wheel using 4 x Ø 5 mm self-tapping screws,
or by using 4 x Ø 4.8 mm steel pop rivets placed 5
mm to 15 mm from the outer rim of the drive wheel,
regardless of the roller tube.
The screws or pop rivets must only be attached to
the drive wheel and not to the drive.
• Alternatively, a drive wheel stop can be used for tubes which are not smooth.

f
and onto the drive bracket 
Ensure that the drive/tube assembly is secured onto
the end bracket. This operation prevents the drive/
tube assembly from coming out of the end bracket
mounting when the roller blind reaches the lower end
limit position.
hin
place.


2.2. WIRING
Cables which pass through a metal wall must be protected and isolated using a sheath or sleeve.
Attach cables to prevent any contact with moving parts.
The cable on the Sonesse 50 can be removed. If it is damaged, replace it with an identical
cable.

easily.
Always make a loop in the power supply cable to prevent water entering the motorisation!
- Turn off the power supply.
- 


Neutral Live Earth
230V -50 Hz Blue Brown Yellow/
Green
220V -60 Hz
120V -60 Hz White Black Green
100V-
50/60Hz
3 x 0.75 mm2
3 x 1,5 mm2
1
2
3

4
EN
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
1) Data cable RJ9/RJ45.




1
23
4
5
6
7
8
4
3
2
1
1
23
4
5
6
7
8
4
3
2
1
 
 
 
 
RJ9 RJ45




1
23
4
5
6
7
8
4
3
2
1
1
23
4
5
6
7
8
4
3
2
1
 
 
 
 
1.1) .
1.2) .

Connect the data cable to the motor according to the information in the tables below.
Between the RS485 data wire and the RS485 product, the cable length should not exceed
20m.
Make sure the data cable is not pinched or damaged during the installation of the drive/
tube onto the end bracket.

5
EN
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION
2.4.1. 
2.3. COMMISSIONING
To set the motor, use the RS485 SETTING

Connect the RS485 SETTING TOOL to the motor
switch on and follow the instruction on the RS485

2) Data cable RJ9/RJ9





1
23
4
5
6
7
8
4
3
2
1




1
23
4
5
6
7
8
4
3
2
1
RJ9 RJ9
Observations  Solutions
The motorised
product does not
operate.
The wiring is incorrect. Check the wiring and modify it if
necessary.
The motorisation is in thermal
protection. Wait until the motor cools down.
An incorrect Data cable has been
used. Check the DAta cable
The motorised
 The drive wheel and the crown
are not suitable for the tube. Replace the drive wheel and the crown
The motorised product is com-
pressed between the brackets Increase the play between the brackets
The tube contains swarf and
screws. Clean the roller tube.

6
EN
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
3. USE AND MAINTENANCE
This motorisation is maintenance-free
3.1. OPERATION
To control the motor, please refer to the installation instruction of the used control.
3.2. TIPS AND RECOMMENDATIONS FOR USE
3.2.1. 
If the motorised product still does not work, contact a motorisation and home automation
professional.
4. TECHNICAL DATA
 230V-50Hz
120V-60Hz 100V-50/60Hz 220V-60Hz
Operating
temperature 
Index protection
rating 
Safety level Class I
Connector RJ9
Somfy Activités SA, F-74300 CLUSES asmanufacturer hereby declares that the drive covered by these instructions when marked
for input voltage 230V~50Hz and used as intended according to these instructions, is in compliance with the
essential requirements of the applicable European Directives and in particular of the Machinery Directive 2006/42/EC and EMC
Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce. Antoine Crézé, Approval manager, acting on behalf of Activity
director, Cluses, 09/2017.
Observations  Solutions
The motorised
product does not
operate. The control point battery is weak. Check whether the battery is weak and
replace it if necessary.
The motorisation is in thermal
protection mode. Wait for the motor to cool down.

1
AR
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.

1 1
11-1
22-1
2 .2
21-2
32-2
53-2
54-2
6 .3
61-3
62-3
6 .4

1
1-1
Sonesse 50

Sonesse 50
Sonesse 50

Sonesse 50

Sonesse 50
Sonesse 50

.Somfy
Sonesse 50


2
AR
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
2-1
Sonesse 50
.
 Sonesse 50

Sonesse 50
.Somfy
     Sonesse 50        
Sonesse 50
Sonesse 50
SomfySonesse 50
.www.somfy.com
2
1)
L1
L1 = …
2)

c


3)
1) 2)
e

  
.Sonesse 50


1-2
1-1-2
1

c
L12
2-1-2
1
2
3

.1.1 / e0.16 /  4 = 




3
AR
Copyright © 2014-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
15
5
20
L1
1)
2)
3-1-2
1

2
•parker
Ø 4,8pop4Ø 5
155

pop

•
4-1-2
f1

         

h2


2-2


Sonesse 50


-
-





50230

 60220
60120

-100
60/50
3 x 0.75 mm2
3 x 1,5 mm2
1
2
3
1)
2)
h

ab
Ø>47mm
ehe
h
f
ab
Ø>47mm
ehe
h