Spectrum 55402 User manual

Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(8) 042749
#8 x 1” PHSM
1. Attach folding shelf brackets to lectern
1. Determine which side of the lectern the shelf is to be installed.
(Left or right-side.)
2. Extend and lock the folding shelf brackets into the horizontal
position. Figure 1.
3. Align and attach each bracket to the side of the lectern with
(2) 8-32 x 1/2” PH thread-cutting screws. Do not tighten these
screws completely yet.
(2) 0109646
Shelf shim
Figure 1
(4) 0100167
8-32 x 1/2” PH
Thread-cutting
screw
(2) 056886
Folding shelf
bracket
(1) 039622
2” Grommet
(1) 0109820
Flip-up shelf
0109769R5 Page 1 of 2
Assembly Instructions
Flip-up Shelf
55402
Phillips
screwdriver
Tools
Required
Folding shelf
bracket
8-32 x 1/2” PH
thread-cutting screw
(2 required per bracket)

2. Attach shelf to brackets
1. Place shims between shelf and brackets.
2. Attach the shelf to the fully-extended shelf brackets with
(8) #8 x 1” PHSM screws. (4 per bracket.) Figure 2.
3. Tighten all screws securely
4. Install 2” grommet in shelf.
3. Operation
The shelf will automatically lock into place when lifted into the horizontal position
with the levers released. Figure 3. To lower or ip-up the shelf, press and
hold the levers under each folding shelf bracket at the same time while slowly
lowering or raising the shelf. Do not exceed a maximum of 35 lbs of weight on
the shelf. Do not move the lectern while the shelf is in the horizontal position.
Note: Power and communication wiring for document cameras, laptop
computers, and / or projectors placed on the ip-up shelf should be
routed on top of the audience-side of the shelf. Use of the shelf grommet
hole for wiring will result in pinching of the cords when the shelf is folded.
Figure 3
Folding shelf
bracket
Release lever
(press here)
Figure 2
CAUTION
Keep clear of pinch points during shelf movement.
Do not exceed 35 lbs [15.9 kg] of weight on shelf.
0109769R5 Page 2 of 2
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2016 Spectrum Industries Inc., All rights reserved.
Shelf
2” grommet
Shim
Folding shelf
bracket
#8 x 1” PHSM screws
(4 required per bracket)
Phillips
screwdriver
Tools
Required