Steelcase 3200 Series Firmware update

Steelcase, Inc.
Grand Rapids, MI 49501
U.S.A.
1-888-783-3522
Tools
Assembly Directions Printed In U.S.A.
REV
93-9500642 -
Page 1 of 2
3/8” SOCKET 5/32” DRILL BIT
Attaching An Extension Top To A 3200, 3300 or 4200 Series Desk
EXTENSION TOP

Assembly Directions
93-9500642 REV - Page 2 of 2
1.
EXTENSION TOP
Align braces with extension top using a square.
Secure both braces to the extension top with No.
10 x 1/2 screws provided.
2. Align extension top with end of desk top. Mark
and drill 5/32” holes in desk top edge.
3. Attach spacer plates to extension top by removing
backing from tape (binding edge only).
4. Lift extension top just enough to remove the backing
from the braces, align brace with the desk leg or end
panel and press in place.
5. Tighten extension top attaching screws.
PRE-DRILLED
HOLES
PRE-DRILLED
HOLES
BRACES
NO. 10 X 1/2” SCREWS
MARK AND DRILL 5/32” HOLES
NO. 14 HEX
HEAD SCREWS SPACER PLATES
(Binding Edge Tops Only)
REMOVE BACKING