Steelcase 415 NORTHSIDE Installation instructions

415 NORTHSIDE Disassembly Instruction
NORTHSIDE WITH ARMRESTS NORTHSIDE WITHOUT ARMRESTS
154223 Rev A
Page 1 of 6
T20 & T30 TORX
Using tools

2 - Slide up
Fabric/Leather
PU Foam
Polypropylene (PP)
154223 Rev A
Page 2 of 6
Using tools
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
Remove the “Backrest Upholstery” from the “Outer Back Shell”
Removed part(s)
1X

2 - Remove 4 screws from the frame
154223 Rev A
Page 3 of 6
1 - Remove 4 screws & 2 washers
from the backrest
T30 TORX
Using tools
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
Remove “Armrests”
Removed part(s)
Polyamide 6 - 30% Glass Fiber (PA6 30%)
1X

154223 Rev A
Page 4 of 6
1 - Remove 2 screws
2 –Slide up
T20 TORX
Using tools
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
Remove the “Outer Back Shell”
Removed part(s)
Polypropylene (PP)
1X

154223 Rev A
Page 5 of 6
1–Punch the Seat at the level
of rear bottom area to unclip it
Using tools
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
Remove the “Seat”
Removed part(s)
PU Foam
Fabric/Leather
Cardboard
Polypropylene (PP)
1X

Page 6 of 6
T20 TORX
Using tools
Remove 5 screws
Polyamide 66 (PA 66)
Lightweight felt (Could be optional)
5X
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
Remove “Glides”
Removed part(s) Remaining part
Steel (S355)
Steel (550D)
Steel (DC01)