Steelcase IMPACT Runoff Firmware update

Steelcase, Inc.
Grand Rapids, MI 49501
U.S.A.
1-888-783-3522
Y9501950
Rev.D
Assembly Directions
Tools
Printed in the U.S.A.
1/8"
(3.1 mm)
IMPACT - Attaching a Runoff to a Credenza
RH Runoff with a
LH Kneespace Credenza
(shown in this direction)
Bullet Runoff with a
Kneespace Credenza
(begin on page 4)
Conference Runoff with a
RH Kneespace Credenza
(begin on page 4)

1.
Page2of4
Y9501950 Rev.D
Steelcase
Drill pilot holes
(13 mm)
deep
1/2”
BOTTOM VIEW
1.00"
(25 mm)
Refer to the bottom view to locate
and install (2) mounting plates on
underside of credenza.
#10-12 x 1.00”
pan head screws

Page3of4
Y9501950 Rev.D
Steelcase
BOTTOM VIEW
2.
3.
4.
SIDE VIEW
(Showing units with
profiles)
optional waterfall edge
Return has coped profile
to fit with waterfall top
Move the runoff into position
(it can rest on plates).
Adjust leveling glides until
tops are completely flush.
Secure with screws provided.

Page4of4
Y9501950 Rev.D
Steelcase
BULLET OR CONFERENCE TOP
1.
2.
3.
Carefully set worksurface (top down) onto carpet.
Install base into routs with the screws provided.
Go to page 2, step 1 to complete assembly.
(12) screws
#10-9 X 1 3/4”
truss head