Steelcase 468 User manual

Page 1 of 15
93950xxxx Rev A
468 - Please Chair
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2000 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Page
2 Assembled 2 pieces Back & Bracket
3  Handle Kit without Headrest
4 Handle Kit with Headrest
5 Handle
6 Lower Cover Kit
7 Upholstered Seat & Screws
8 Adjustable Arms without Attaching Bar
9 Adjustable Arm Assembly
10 Plastic Arm Cap
11 Seat Depth Adjustment
12  Tilt Tension Button
13 Lumbar Support Adj. Handle & Back Lock Handle
14 Hub Cover and Base End Cap
15 Complete Headrest & Screws
6mm
Table of Contents

Page 2 of 15
93950xxxx Rev A
Assembled 2 Pieces
Back and Bracket
1. Remove pin.
2. Rock the back forward.
3. Remove 2 screws and hardware.
4. Remove screw on each handle.
5. Remove the assembled 2 pieces
back and bracket.
6. Place the new assembled 2 pieces
back and bracket between the handles
and secure with screws.
7. Replace the hardware and screws.
Rock the back and replace the pin.
12
5
3
4

Page 3 of 15
93950xxxx Rev A
Handle Kit Without Headrest
1. Remove pin.
2. Rock the back forward.
3. Remove 2 screws and hardware.
4. Remove handle, slide, and plastic guide.
5. Replace plastic guide, slide, and handle.
6. Replace hardware and pin.
7. Rock the back and replace handle.
1
4
2
PLASTIC GUIDE
PUSH HERE ON
EACH SIDE TO
REMOVE PLASTIC
GUIDE
3

Page 4 of 15
93950xxxx Rev A
Handle Kit With Headrest
1. Remove pin.
2. Rock the back forward.
3. Remove 2 screws and
 hardware and headrest.
4. Remove handle, slide, and plastic guide.
5. Replace plastic guide, slide, and handle.
6. Replace the headrest and the hardware.
7. Rock the back and replace handle.
1
4
2
3
PLASTIC GUIDE
PUSH HERE ON
EACH SIDE TO
REMOVE PLASTIC
GUIDE

Page 5 of 15
93950xxxx Rev A
Handle
1. Remove pin.
2. Rock the back forward.
3. Extract the old handle and insert
 the new handle.
4. Rock the back and replace the pin.
1
3
2

Page 6 of 15
93950xxxx Rev A
Lower Cover Kit
1. Remove pin.
2. Rock the back forward.
3. Extract the handle.
4. Use a flat blade screwdriver between
the two (2) covers and remove the lower  
cover.
5. Extract the upper cover.
6. Insert a new upper cover and clip it with the
lower cover.
7. Rock the back and replace handle and pin.
3
2
4
4
5
5
1
UPPER
COVER
LOWER
COVER

Page 7 of 15
93950xxxx Rev A
Upholstered Seat And Screws
1. Remove the eight (8) screws and
remove the seat.
2. Replace the seat. Don't forget the eight (8)
washers between the seat and the seat's slides.

Page 8 of 15
93950xxxx Rev A
Adjustable Arms
without Attaching Bar
1. Put the arm in the highest position.
2. Remove the plastic cover.
3. Insert flat-blade screwdriver
in the arm tube.
4. Remove the plastic arm cap.
5. Remove three (3) screws.
6. Reassemble a new plain arm.
7. Insert the new plain arm in the
arm bracket.
3
4
5
1 2
USE AS LEVER
TO MOVE WHILE
LIFTING ARM CAP

Page 9 of 15
93950xxxx Rev A
Adjustable Arm Assembly
1. Remove the eight (8) screws and
remove the seat.
2. Remove the three (3) screws.
3. Place the new pair of adjustale assembled
plain arm and screw the three (3) screws.
4. Replace the seat. Don't forget the eight (8)
washers between the seat and the seat's side.
1
2

Page 10 of 15
93950xxxx Rev A
Plastic Arm Cap
1. Remove screw to remove arm cap.
2. Replace arm's notch in the rib and secure
with screw.
1 2