Steelcase Context User manual

Steelcase, Inc.
Grand Rapids, MI 49501
U.S.A.
1-888-783-3522
Tools
Assembly Directions Printed In U.S.A.
REV
93-9503977 C
Page 1 of 4
Context®Transition Core
Quadrex, Torx And Phillips Tip Bits
Quadrex, Torx And Phillips Tip Bits
1/4" Drive with a 3/8" Socket
NOTE: A Power Driver With Universal Socket Will Ease Installation)
Quadrex and #2 Phillips Bit

Assembly Directions
93-9503977 REV CPage 2 of 4
1.
BOLTS 1/4 X 5/8"
(3) REQUIRED PER
BRACKET
ATTACHMENT
BRACKET
Position core units 90
°
to each other. Adjust glides and level units
2.
Position and loosely secure (1) attachment bracket to each intermediate support.
3.
90°
90°
GLIDES

Assembly Directions
93-9503977 REV CPage 3 of 4
4. Position and loosely secure vertical support to
intermediate supports.
BOLTS 1/4 X 1/2"
(2) REQ'D FOR EACH
INTERMEDIATE SUPPORT
ATTACHMENT
BRACKET
VERTICAL
SUPPORT
SCREWS 7/8"
LONG (6) REQ'D
SCREW
1-1/2" LONG
Position and loosely secure transition worksurface.
5.
6. Insert screws (1) and (4). Do Not Tighten.
Push worksurfaces tightly together, closing any gap. Insert screws
(2) and (3) and tighten. Now tighten screws (1) and (4).
For 24" Deep Worksurface
Connection
1
2
4
3
For 30" Deep Worksurface
Connection
12
4
3
VERTICAL
SUPPORT

Assembly Directions
93-9503977 REV CPage 4 of 4
7.
PORT
VERTICAL
SUPPORT
SCREW .312-18
(2) REQ'D
REAR PORT
COVER
PORT
COVER
9. Secure ports onto vertical support. Insert rear port corner,and snap port covers into place.
8. Align transition worksurface with adjacent worksurfaces and tighten all screws and bolts. Now press cover
hinge into embossed tabs on vertical support.
Position and loosely secure cover to vertical support.
VERTICAL
SUPPORT
COVER