Steelcase Monarch Firmware update

AssemblyDirectionsPrintedinU.S.A.REV
Y9501805 B
Page1of5
Steelcase®
Steelcase,Inc.
GrandRapids,MI49501
U.S.A.
1-888-783-3522
CornerWorksurface
and
ReceptionReturn
Assembly
Monarch,Stafford
Tools
TapeMeasure1/8"Drill BitLevel
Large
PhillipsHead
Screwdriver
PowerDriverwith
PhillipsorSquare
Tip

AssemblyDirections
Y9501805 REVBPage
2of5
Steelcase
MINIFIXBOLT
LEFTBACK
PANELRIGHTBACK PANEL
MINIFIXCAM
Install (2)threadedminifixbolts
intoleftbackpaneland(2)minifix
camsintorightbackpanel.
Slidepanelstogether,then
tightenminifixcamsas shown.
Install (3)1-1/2"screwsthrough
woodencleatandintoleftpanel.
Insertminifixboltandcaminto
holeas showninFig.A.Turncam
clockwisetodrawboltintightly
(Fig.B).Repeatfor remaining
minifixlocationsinbackpanels.
1.
2.
3.
MINIFIX
BOLT
MINIFIXCAMFig.A
Fig.B

AssemblyDirections
Y9501805 REVBPage
3of5
Steelcase
Slidereturnsintoposition.
Install (4)remainingminifixcams
andtighten.
Positionwoodenattachmentcleat
overjointformedbyadjacentback
panels.Install (6)7/8"screwsfor
eachcleat.
Adjustglides(arrowsindicate
locations)tolevelassembly
asnecessary.
4.
5.
6.

AssemblyDirections
Y9501805REVBPage
4of5
Steelcase
Install bracketsas shown.
7.
RETURNTOP
BRACKET
BRACKET
Carefullyplacecornerworksurface
topinposition.
Attachtoptobracketsusing(4)
5/8"screwsforeachbracket.
Again using5/8"screws,install
(4)anglebracketstoundersideof
topsothat theyaresnugagainst
backpanels.Makesuretopis
level,thenattachangle
bracketstobackpanels.
8.
9.
BRACKET
ANGLE
BRACKET

AssemblyDirections
Y9501805REVBPage
5of5
Steelcase
Install small shelfatdesiredheight
with(6)5/8"screws.
Press (6)minifix
coversintoplace.
Using(8)1-1/2"screws,install
woodencleatsflushwithtop
edgeofbackandendpanels.
Positiontransactiontopsothat
endsandbackhave1-1/16"
overhang.Install (8)1-1/2"
screwstosecure.
10.
11.
12.