STI STI-SA5600 User manual

INSTALLATION OF STI-SA5600 SELECT ALERT SIREN/STROBE
All specifications and information shown were current as of publication and are subject to change without notice.
SA5600IS JAN2021
2306 Airport Road
Waterford • Michigan • 48327-1209
Phone: [phone] • Fax: [phone]
E-mail: [email protected] • Web: www.sti-usa.com
Taylor House • 34 Sherwood Road • Bromsgrove
Worcestershire • B60 3DR • England
Tel: [phone] • Fax: [phone]
E-mail: [email protected] • Web: www.sti-emea.com
Housing Installation
1. Loosen screw with 3/32 HEX KEY.
2. Pull bottom of housing out and lift up until tabs are
released from slots in top of siren/strobe assembly.
WARNING: This product can expose you to chemicals including Dichloromethane, which is known to the
State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to
cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Three year warranty or a one year limited warranty (from date of purchase) on most products. See
website for details. Electronic warranty form at www.sti-usa.com/wc14.
Wire Connections
WHITE - TAMPER
GREEN - TAMPER
BLUE - STROBE
YELLOW - SIREN
BLACK - GROUND
INPUT
12-24 VDC, 504 mA Max.
LENS TAMPER
N.C. DRY CONTACT
0.05 A @ 12 VDC
OPERATING TEMPERATURE
-4°F TO 140°F (-20°C TO 60°C)
TRIGGER
(NOT PROVIDED)
BLK (-)
SIREN
YEL (+)
+
-
BLU (+) GREEN
WHITE
-
+
TRIGGER
(NOT PROVIDED)
BLK (-) YEL (+)
SIREN
BLU (+) GREEN
WHITE
-
+
BLK (-) YEL (+)
STROBE
BLU (+) GREEN
WHITE
TRIGGER
(NOT PROVIDED)
Control W/POWER SUPPLY
- Alarm on trigger close
STROBE & SIREN
SIREN ONLY
STROBE ONLY
TAMPER SWITCH TO
SUPERVISORY PANEL
(OPEN DOES NOT SOUND
ALARM)
TAMPER SWITCH TO
SUPERVISORY PANEL
(OPEN DOES NOT SOUND
ALARM)
TAMPER SWITCH TO
SUPERVISORY PANEL
(OPEN DOES NOT SOUND
ALARM)
CONTROL W/POWER SUPPLY
ALARM ON TRIGGER CLOSE
A
STROBE SIREN VOLUME
2.10 in.
(53.3mm)
FLUSH MOUNT 3.58 in.
(90.8mm)
KIT-71100A
.73 in.
(18.5mm)
DETAIL A
A
STROBE SIREN VOLUME
SCREW
3/32 HEX KEY
COVER SLOT
TAMPER SWITCH
LED
DO NOT TOUCH
WHEN USING ANCHORS
DRILL (4) 3/16 in. DIA. HOLES 1-1/4 DEEP
WALL ANCHOR
(4) PROVIDED WITH KIT7110A
DRILL POINT LOCATION PROVIDED TOP AND BOTTOM
FOR 1/2” CONDUIT FITTINGS. DRILL AS NEEDED.
OPTIONAL SURFACE MOUNT ELECTRICAL BOX
(KIT-71100A SHOWN)
#6 x 1.25 in. SCREW
(4) PROVIDED WITH KIT-71100A
SIREN STROBE ELECTRONIC BASE
SWITCH SETTINGS
SEALING O-RING
(2) PROVIDED
SCREW #6-32 x 1 in.
(2) PROVIDED
WIRE LEADS

S2 - STROBE CONTROL (1)
1 2 3 4 5 6 7 8 9 FUNCTION
* 1 1 1 LEFT TO RIGHT FLASHING (30cyc/ 1 min)
O 1 1 BREATHING ( 12cyc/1 min)
1 O 1 FLASHING (120 cyc/1 min)
O O 1 FLASHING (90 cyc/1 min)
1 1 O FLASHING (60 cyc/1 min)
O 1 O INDIRECT FLASHING (50 cyc/1 min)
1 O O INDIRECT FLASHING (30 cyc/1 min)
O O O CONTINUOUS (SOLID LIGHT)
S2 - ALARM TONES (2)
1 2 3 4 5 6 7 8 9 FUNCTION
*1 1 1 1 1 1800Hz - 3300Hz @ 150ms
O 1 1 1 1 500Hz - 1200Hz, 0.5s/ 0.5s OFF x 3/1.5s OFF (AS1670 EVACUATION)
1 O 1 1 1 520Hz, 0.5s / 0.5s OFF x 3/1.5s OFF (FIRE)
O O 1 1 1 1200Hz - 500Hz @ 1Hz (DIN 33 404)
1 1 O 1 1 500Hz - 1200Hz, 3.75s ON / 0.25s OFF (AS2220)
O 1 O 1 1 550Hz/440Hz @0.5 Hz
1 O O 1 1 970Hz, 0.5s/ 630Hz, 0.5s
O O O 1 1 800Hz / 1000Hz 0.5s each (1Hz)
1 1 1 O 1 1500Hz - 2700Hz @ 3Hz
O 1 1 O 1 800Hz / 970Hz @2Hz
1 O 1 O 1 800Hz, 0.25s ON/ 1s OFF
O O 1 O 1 2400Hz - 2900Hz @ 9 Hz
1 1 O O 1 750Hz
O 1 O O 1 970Hz
1 O O O 1 970Hz, 1s OFF/1s ON
O O O O 1 500Hz - 1200Hz, 3.5s ON/ 0.5s OFF (NEN 2575:2000 DUTCH SLOW WHOOP)
1 1 1 1 O 800Hz - 970Hz @1Hz
O 1 1 1 O 1000-2500Hz, 0.5s/ 0.5s OFF x 3/1.5s OFF (AS1670 EVACUATION)
1 O 1 1 O 2850Hz, 0.5s ON/0.5s OFF x 3/1.5s OFF (ISO 8201)
O O 1 1 O 660Hz 1.8s ON/1.8s OFF
1 1 O 1 O 500Hz - 1200Hz @ 0.33Hz
O 1 O 1 O 250Hz - 1200Hz @ 12Hz
1 O O 1 O 2400Hz
O O O 1 O 800Hz / 970Hz @9Hz
1 1 1 O O 510Hz, 0.25s/ 610Hz, 0.25s
O 1 1 O O 550Hz, 0.7s/1000Hz, 0.33s
1 O 1 O O 660Hz 0.15s ON/0.15s OFF
O O 1 O O 800Hz - 970Hz @ 3Hz
1 1 O O O 420Hz 0.625s ON/0.625s OFF (AUSTRALIA AS1670 ALERT TONE)
O 1 O O O 554Hz, 0.1s/440Hz, 0.4s (AFNOR NF S 32 001)
1 O O O O 970Hz, 0.5s ON/0.5s OFF x 3/1.5s OFF (ISO 8201)
0 O O O O 2400Hz - 2900Hz @ 3 Hz
S2 - VOLUME (3)
1 2 3 4 5 6 7 8 9 FUNCTION
* 1 VOLUME - HI
O VOLUME - LOW
*Default
INSTALLATION OF STI-SA5600 SELECT ALERT SIREN/STROBE
All specifications and information shown were current as of publication and are subject to change without notice.
SA5600IS JAN2021
2306 Airport Road
Waterford • Michigan • 48327-1209
Phone: [phone] • Fax: [phone]
E-mail: [email protected] • Web: www.sti-usa.com
Taylor House • 34 Sherwood Road • Bromsgrove
Worcestershire • B60 3DR • England
Tel: [phone] • Fax: [phone]
E-mail: [email protected] • Web: www.sti-emea.com
1 2 3 4 5 6 7 8 9
Strobe (1)
ON
Volume (3)
Siren (2)
S2
HOR
1100A)
RILL (4)
. HOLES
IRE LEA
3/32 in. HEX KEY
SCREW
DRILL POINT LOCATION TOP AND
BOTTOM FOR 1/2” CONDUIT
FITTINGS. DRILL AS NEEDED.
DRILL (4) 3/16 in.
DIAMETER HOLES
WALL ANCHOR
(4) PROVIDED
WITH KIT-71100A
OPTIONAL SURFACE MOUNT
ELECTRICAL BOX
KIT-71100A SHOWN
#6 x 1.25 in. SCREW
(4) PROVIDED WITH KIT-71100A
SIREN STROBE ELECTRONIC BASE
SEALING O-RING (2) PROVIDED
SCREW #6-32 x 1 in. (2) PROVIDED
WIRE LEADS
COVER SLOT
DETAIL A
A
STROBE SIREN VOLUME
TAMPER SWITCH
LED
DO NOT TOUCH
TAMPER SWITCH
HOR
1100A)
RILL (4)
. HOLES
IRE LEA
3/32 in. HEX KEY
SCREW
DRILL POINT LOCATION TOP AND
BOTTOM FOR 1/2” CONDUIT
FITTINGS. DRILL AS NEEDED.
DRILL (4) 3/16 in.
DIAMETER HOLES
WALL ANCHOR
(4) PROVIDED
WITH KIT-71100A
OPTIONAL SURFACE MOUNT
ELECTRICAL BOX
KIT-71100A SHOWN
#6 x 1.25 in. SCREW
(4) PROVIDED WITH KIT-71100A
SIREN STROBE ELECTRONIC BASE
SEALING O-RING (2) PROVIDED
SCREW #6-32 x 1 in. (2) PROVIDED
WIRE LEADS
COVER SLOT
DETAIL A
A
STROBE SIREN VOLUME
TAMPER SWITCH
LED
DO NOT TOUCH
TAMPER SWITCH