Sunjoy G-GZ006PWI User manual

Assembly Instructions: Gazebo G-GZ006PWI

Read, understand and follow all instructions before assembly. Make sure you have all parts
and hardware listed in the parts list.
Parts List:
No.
Part
Qty.
A
Centre fitting
1
B
Corner fitting
4
C
3-way fitting
4
D
Screen
4
E
Screen
4
F
146 cm pole
8
G
105 cm pole
4
H
155 cm pole
4
I
Nut end
64
J
Bolt (6x32 mm)
40
K
Bolt (6X52 mm)
24
L
Washer (6 mm)
64
M
Nut (6 mm)
64
N
Fabric cover
1
O
Stake
16
P
112 cm pole
4
Assembly Instructions:
1. Lay parts on ground as shown in illustration.
2. Attach screens (D) to screens (E) using bolts (K), washers (L) and nuts (M). Make sure
not to cross-thread bolts and nuts. Do not over tighten fasteners.
3. Attach poles (F) to 3-way fittings (C) and fasten using bolts (J), washers (L) and nuts (M).
4. Attach corner fittings (B) and poles (F) to screens using bolts (K), washers (L) and nuts
(M) (Fig. 3).
5. Join poles (G) to poles (P) using bolts (J), washers (L) and nuts (M) (Fig. 12).
6. Attach poles (G) to centre fitting (A) and fasten using bolts (J), washers (L) and nuts (M)
(Fig. 5 & 9).
7. Attach poles (H) to centre fitting (A) and fasten using bolts (J), washers (L) and nuts (M)
(Fig. 4 & 9).
8. Attach poles (H) to 3-way fittings (C) and fasten using bolts (J), washers (L) and nuts (M)
(Fig. 6 & 9).
9. Attach poles (P) to corner fittings (B) and fasten using bolts (J), washers (L) and nuts
(M).
10. Fit fabric cover (N) over frame. Attach velcro straps on the inside of fabric cover.
11. Tighten all hardware and place nut ends (I) on nuts.
12. Secure the gazebo to the ground with stakes (O).
Please do not return this product to the store. For technical assistance on assembly or replacement parts
call Sunjoy Industries at 1(866)578-6569 from 8:30 AM to 5:30 PM Pacific Standard Time or
Email [email protected]
for assistance.