Swisher PowerBlade PBA-6550 User manual

PBA-6550
Arctic Cat Models
400 Auto VP 4X4 06
400i Auto & Manual 4X4 06
400 Auto TBX 4X4 04
500 Auto 4X4 05
500i Auto TBX 4X4 06
600i Auto 4X4 06
650 Twin 4X4 05
650 Hemi 4X4 05
650 Prowler XT 4X4 06
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate(s) for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13184
Partial Frame View

1
2
3
4
5
6
Item # Description Part #
1 Mount Plate 10892TK
2 U Bolt 10883
3 Bolt M10 X20 10894
4 Lock Nut NB181
5 Hair Pin #39 NB127
6 Clevis Pin 10305
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. Remove the foot rest bolts. Install Mounting Plate and replace bolts with new hardware
provided.
2. If the skid plate is still in place , you will have to drill two holes to allow the mounting of the U
Bolts to the frame.
3. Slip the U Bolts into the slotted holes and attach using the lock nuts ( Item 4) .
4. Tighten all hardware.
Drill thru Skid Plate using
these holes as a guide