Swisher PowerBlade PBP-3550 User manual

PBP-3550
Polaris Models
Sportsman 4X4 335 –00&Older
Sportsman 4X4 400 - 01
Sportsman 4X4 Diesel 445 -99
Sportsman 4X4 500 01 & Older
Sportsman 4X4 500X 02
Sportsman 4X4 HO RSE 500 02 & Older
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13050

Item # Description Part #
1 Mount Plate Right 7871TK
2 Mount Plate Left 7867TK
3 U Bolt 7873Z
4 Washer Flat NB275
5 Nylock Nut 5/16-18 NB181
6 Hair Pin #39 NB127
7 Clevis Pin 10305
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. Identify the Right hand and the Left Hand Brackets
2. Place the Right Hand mount plate up against the bottom of the Right Hand Foot Rest
3. Locate the Blade Mount tab toward the front of the ATV .
4. Slip the U bolts over Foot rest and attach the mounting nuts
5. Place the Left Hand mounting bracket against the Left Hand foot rest and attach.
6. Snug the hardware and check the space Outside of tabs. ( 14.187 Inches)
7. Tighten the bolts securely
1
2
3
4
5
6
7