Swisher PowerBlade PBK-2510 User manual

PBK-2510
Kawasaki Models
KLF300 2X4 & 4X4 02 & Older
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate(s) for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13123
Partial Frame View

Item # Description Part #
1 Mount Plate 10520TK
2 U Bolts NB724
3 Washer NB275
4 Lock Nut NB181
5 Clevis Pin 10305
6 Hair Pin #39 NB127
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. Remove the U bolts from plate and place them on the frame side rails just ahead and behind
the footrest mount.
2. Place the mount plate up against the frame and align the holes with the U Bolts, Install the
washers and nuts and snug into position
3. Slide the plate rearward until the U bolt makes contact with the footrest..
4. Align the plate and tighten hardware
Front of ATV
12
5
6
3
4