Target SERENE TRUNDLE BED User manual

SERENE TRUNDLE BED
KING SINGLE
A-UPHOLSTERED BED
X 1PCS
B-HEADBOARD PANEL
X 1PCS
C-FOOTBOARD PANEL
X 1PCS
D-METAL BASE X 1PCS E-CORNER BRACKET
X 2PCS
F-MATTRESS STOPPER
X 4PCS
G-SIX HOLE LINKAGE
PLATE X 4PCS
H-ADJUSTABLE GLIDER
X 4PCS
I-M6 X 20MM
X 32PCS
K-FLANGE NUTS
X 8PCS
L-ALLEN KEY M6
X 1PCS
CAREFULLY UNPACK ALL ITEMS FROM THE CARTONS.
You will need a standard screw driver
Step 1 - Screw the adjustable glider (H) to the Bed Stand Boom B & C.
1- ATTACHING ADJUSTABLE TO THE BED STAND 2- ATTACHING BOLT TO SIX-HOLE PLATE
Step 2- Choose which side of the wooden bed base you would like to have
the bed against the wall. Aach bolt(I) to six hole plate (G).
Repeat the same step to other side.
MODEL :
PART LIST
Step 1
Step 2
J-SPRING WASHER
X 8PCS
I
M - STARBOLT X 4PCS

3- ATTACHING BOLT TO CORNER BRACKET
Step 3- Connect Corner brackets(E) with bolt(I) and spring washer (K) on the
side that is going to be placed against the wall (as illutrate)
Repeat the same step to other side.
4- TURN THE BED
5- ATTACHING HANDLE TO METAL BASE
1 - Fix the maress stopper (F) to the metal base with flange nuts(K). Repeat
the same step to each side.
6- CLOSED OR OPEN
2- When open, open the hinges to full extenon (reference no. 2)
1 - When closed, loosen the hinges (reference no. 1 & 3)
Please mind your hand when the mechanism closed or open.
Step 3
12
3
Step 4- Then flip the trundle.
7- SLOT IN THE METAL BASE 8- METAL BASE SITS IN PLACE UNDER TRUNDLE
1 - Slot in the metal base under the trundle carefully.
K
K
IJ
I
J

OPTIONAL
Insert the star bolt into the Oponal Headboard Panel & Headboard Panel (B).
OPTIONAL HEADBOARD
ASSEMBLY IS COMPLETED