Target CAPRI 1800 User manual

COMPONENTS / HARDWARE
4
ALLOW 30 MINUTES
FOR ASSEMBLY
4 PEOPLE REQUIRED
FOR ASSEMBLY
IMPORTANT:
On initial assembly, DO NOT tighten bolts
completely until all parts are joined. Once
all parts are joined,
flip table over, ensure all legs are even.
Once even, tighten bolts.
CAPRI 1800 DINING TABLE
PRE-ASSEMBLY PREPARATION
BEFORE YOU START
1.Choose a clean, level, spacious assembly area.
2.Avoid hard surfaces that may damage the product.
3.Check and ensure you have all required contents for complete assembly.
4.Always read the assembly instructions carefully before beginning.
5.The packaging and contents can be a choking hazard, therefore keep out of
reach of small children at all time.
6.Do not over tighten bolts as this may damage the thread.
A
G
F ED
C
B
PRODUCT IMAGE
1PC 4PCS 1PC
20PCS M6*20 20PCS 20PCS
1PC

2
FINISH
STEP 3: STEP 4:
STEP 1: STEP 2:
PUT TOP OF TABLE(A) ON THE FLOOR,TAKE THE LEG(B) TO MATCH THE HOLE OF
TABLE, USE SCREW(D) AND (E) TO CONNECT ，DO NOT OVERTIGHTEN
TAKE FIXED FRAME( C) TO MATCH THE HOLE OF LEG,USE SCREW (D) AND (E) TO
CONNECT,TIGHTEN ALL SCREW AND PUT ON CAP (F)
FLIP TABLE OVER, ENSURE ALL LEGS ARE EVEN.
ONCE EVEN, COMPLETELY TIGHTEN ALL BOLTS.
BE CAREFUL NOT TO OVERTIGHTENAS THIS MAY DAMAGE THREADS.
YOUR TABLE IS NOW READY FOR USE.