TOORX EXPERIENCE PLUS User manual

Ed : Rev : Cod :
INSTRUCTION
08/21 GRLDTOORXEXPLUS00

- 5 -
EXPLODED DRAWING

- 6 -
PARTS LIST
PART NO
PART NAME
Q'TY
1 1 1
Handle frame
1
2
Console top frame
1
3
Left heart rate tube
1
4
Right heart rate tube
1
5
Left upright
1
6
Right upright
1
7
Base frame
1
8
Incline frame
1
9
Running platform frame
1
10
Heart rate tube sleeve
2
11
Heart rate handle
2
12
Safety key
2
13
Start/stop press board
1
14
Main press board
1
15
Display
1
16
Plastic panel
1
17
Newspaper frame
1
18
Press transparency cover
1
19
Press key frame
1
20
START press key cap
1
21
STOP press key cap
1
22
Outside to pull board
2
23
Handle cover
2
24
Handle tube plug
2
25
Console top up cover
1
26
Console top down cover
1
27
Trumpet
2
28
Left cap frame
1
29
Right cap frame
1
30
Console main cover
1
31
Console down cover
1
32
Protect cover of left upright
1
33
Protect cover of right upright
2
34
Level frame of base frame
1
35
Damper
2

- 7 -
36
Move wheel frame
2
37
Move wheel of base frame
2
38
Rubber cushion of base frame
1
39
Motor belly pan
2
40
Move wheel of incline frame
2
41
Left end cap
1
42
Left wheel cover of running platform
1
43
Right end cap
1
44
Right wheel cover of running platform
2
45
Support wheel of running platform
2
46
Fix cushion of running deck
2
47
Rubber cushion of running deck
4
48
Side rail
1
49
Running deck
1
50
Running belt
1
51
Rear roller
1
52
Front roller
1
53
Motor belt
1
54
Motor
1
55
Motor frame
1
56
Motor cover
1
57
Magnet ring
1
58
Incline motor
1
59
Front tube plug of running platform
2
60
Adjust tube plug of motor
1
61
Power switch cushion
1
62
Fuse
1
63
Power switch
1
64
Power wire
1
65
Filter
1
66
Control board
1
67
Connect wire of console top
1
68
Connect wire of console frame
1
69
Connect wire of upright
1
70
Connect wire of running platform
1
71
ST4.2*15 screw
30
72
M8*15 Allen head bolt
4
73
ST4.2*15 screw
12

- 8 -
74
M8*25 Allen head bolt
2
75
M8*20 Allen head bolt
4
76
M8*20 Allen head bolt
6
77
Φ8Arc Washer
2
78
Φ8 Washer
15
79
M8*35 Allen head bolt
1
80
M8 Lock Nut
9
81
M8*45 Allen head bolt
1
82
M8*50 Allen head bolt
2
83
ST4.2*20 screw
2
84
ST4.8*16 screw
14
85
M8*40 Allen head bolt
4
86
M10*80 Allen head bolt
2
87
M8*30 Allen head bolt
2
88
Connect shaft sleeve of incline frame
2
89
Plastic washer
2
90
ST4.2*15 screw
6
91
M8*65 Allen head bolt
2
92
Side rail cushion
8
93
M8*25 Allen head bolt
2
94
M8*80 Allen head bolt
2
95
M8*55 Allen head bolt
4
96
M8*20 Allen head bolt
4
97
Φ8 spring Washer
6
98
M8*12 bolt
2
99
M8*70 Allen head bolt
1
100
M10*50 Allen head bolt
1
101
Φ13 plastic Washer
2
102
M10 Lock Nut
2
103
M10*60 Allen head bolt
1
104
ST4.2*12 screw
8

- 9 -
HARDWARE COMPARISON CHART
For your convenience, we have identified the hardware used in the assembly of this product. The chart
below is provided to help you to identify items that may be unfamiliar to you.
NO.
DESCRIPTION
Q'TY
71
ST4.2*15 screw
8
72
M8*15 Allen head bolt
4
74
M8*25 Allen head bolt
2
75
M8*20 Allen head bolt
4
76
M8*20 Allen head bolt
6
77
Φ8Arc Washer
2
78
Φ8 Washer
4
A
SCREWDRIVER
1
B
5mm SOCKET HEAD WRENCH
1
C
6mm SOCKET HEAD WRENCH
1
D
LUBRICANT
1

- 10 -
ASSEMBLY INSTRUCTIONS：
WARNING: Please put on all the screws, washers and bolts then tighten them.
STEP1:
First connect Connect wire of base
frame and Connect wire of upright.
Fix upright onto the base frame
with M8*20 Allen head bolt76、Φ8
Arc Washer77 and Φ8 Washer78。
STEP2:
First connect Connect wire of console
frame and Connect wire of upright.
Fix the console onto the upright with
M8*25 Allen head bolt74 and M8*20
Allen head bolt75.

- 11 -
STEP3 A:
First loosen six bolts before install
console top.
STEP3 B:
Fix console top with console frame
with 72 M8*15Allen head bolt.

- 12 -
STEP4:
Fix the protect cover of upright base
frame with ST4.2 * 15 Screw 71.
STEP3 C:
Fix the Press transparency cover on
the console with 71 ST4.2*15 screw.

- 13 -
Folding illustration:
To unfold the treadmill:
Folding illustration:
To drop down treadmill:
1. Strike the damper.
2. Hold on to the top end covers
and pull down the treadmill slowly
on the ground.
To fold up the treadmill:
Both hands hold on the bottom end
covers and lift up the treadmill.

- 14 -
The operation instructions of the treadmill mainly include two parts, namely the operation of the button
board and the interface operation of the Android control all-in-one machine.
Key board operation
1.MANUAL pattern
For manual mode, click "start" to start the treadmill.
2.TARGET pattern
Press the target button to set the countdown and set the target time, calories, distance, and the
number of steps.
3.PROG pattern
Program selection.After the PROG key enters the program mode, the key can switch to select the
desired operation mode.
4.HRC
Enter the HRC functional interface
USER
Enter the user mode.
6.BODY FAT

- 15 -
Measuring fat function
7.ENTER
Confirm key, generally enter mode or program interface, click confirm to confirm mode can enter.
8.MODE
Enter the mode interface.
9.3.6.9.12.15
Shortcuts for speed and slope.
10.START
Start the treadmill.
11.STOP
Stop the treadmill when the treadmill is started.
Interface operation
1. main interface
The main interface contains 9 modules: lipid measurement, HRC,APP, multimedia, setting, quick start,
training program, target training, and real-action movement.
2.measure fat
Liposometry function mainly tests the BMI data based on age, height, weight, and sex.Enter age,
height, weight, and select a good gender, and then click "test" to calculate the BMI value.

- 16 -
3.HRC
In this mode, 65%, 75% and 85% are available, click in on demand.
Take 65% here as an example. After entering, you can fill in your age, weight, target heart and
exercise time according to your personal data.After filling in, you can "start" the treadmill and enter the
sports interface.

- 17 -
4.APP
This feature is mainly some third-party applications installed in the device, at which athletes can
choose the APP browsing they need to use.At this interface, the treadmill can also be
controlled, You can start the treadmill，Suspension function，Stop functionality，
Volume adjustment function, speed increase and decrease, and return interface function。
5.multi-media
Multimedia features are usually mainly about reading and browsing videos, music, and pictures in a U
disk or memory card.The treadmill can also be tionally controlled under this interface。

- 18 -
6.Set Up
Settings are usually mainly used to connect to WiFi, Bluetooth, brightness adjustment, and
volume.Click on the settings of the main interface to pop up the password interface.
The password is 886127, and you can enter the Settings function

- 19 -
interface.
6.1 System settings
This setting function is mainly connecting to WiFi, Bluetooth, brightness adjustment, or volume
adjustment.According to the figure below, "Network and Internet" is the connection WiFi function, click
in to select the WiFi you need to connect, and then enter the password to connect."Connected device"
is the Bluetooth function, click in and choose the Bluetooth to connect to connect."Display" is the
adjustment of screen brightness, and dragging the progress bar to choose the brightness
desired.Pull-down of the interface has a "scenario mode" that is the volume adjustment function
button.
6.2 Plant setup
This feature is usually used by developers to view communications.The basic functions of the treadmill

- 20 -
can be controlled here.
6.3 parameter setting
This function interface is mainly to set the parameters of the treadmill, mainly setting the minimum
speed, maximum speed, maximum slope, refueling time and other parameters of the treadmill. After
filling in, remember to click the "parameter setting" at the bottom, pop up "Save parameters", and click
to save.
6.4 Application upgrade
The application upgrade function is mainly used by apk software in the subsequent optimization.As
long as you connect to WiFi and click on the application upgrade to automatically make the software
upgrade, which is very easy to use. Remember not to cut off power or do any other operation, and the

- 21 -
installation can be updated after the installation.
6.5 file management
File management functions are generally used for operations such as copying video and installing
applications.
6.6Application management
Application management is generally used to install apk files or uninstall undesired apk.
7.quick start
Click the "quick start" of the main interface to enter the sports interface. Seven sports data, including
slope, time, heat, heart rate, distance, speed and steps, where shortcuts can pop up after speed and
slope, 3.6.9.12 respectively. The slope and speed progress bars of the middle section can drag select

- 22 -
the parameters of the desired motion, while the distance and physical exertion are automatically
displayed.On the right is the stop motion function，To pause the motion function。
When the stop button is clicked, the end motion data result interface is entered.Movement data mainly
included total time, average velocity, average slope, total heat, and total distance.The motion data
result interface also includes the app interface and volume adjustment function.
8. training program
Click on the "Training Program" at the main interface to enter the program selection interface.The
interface includes a total of 12 programs, the motion process is consistent with the figure, where the
red line is slope and the white lattice is speed.The + and-keys in the bottom left corner can set the

- 23 -
movement time according to the requirements, and choose the movement program according to the
needs.After determining the movement time, click "Start" to enter the movement interface of the
program.
The selected program shows on the right, with "Program mode P1" as an example.After entering the
program motion mode, the device will automatically change the speed and slope according to the
setting ratio of time and program mode. During this period, the slope and speed can also be
automatically adjusted, but the program will mainly change according to the already set value。
9.Target training
Target training mainly includes time, distance, and calories.Here, take the target time as an example.
Click the target time to set, adjust the time can use + and-number, or you can drag the progress bar in