TOORX TRX 65 S User manual

Ed : 03/17 Rev : 00
INSTRUCTION
APP REAdY

2
CONTENT
CONTENT --------------------------------------------------------------------------------------------------------------------------------2
IMPORTANT SAFETY PRECAUTIONS -----------------------------------------------------------------------------------3-4
MAIN TECHNICALPARAMETERSAND PRODUCT OVERVIEW-----------------------------------------4
ASSEMBLY INSTRUCTIONS -------------------------------------------------------------------------------------------------5-8
FOLDING & UNFOLDING INSTRUCTIONS -------------------------------------------------------------------------------9
GROUNDING METHODS ----------------------------------------------------------------------------------------------------------10
OPERATION GUIDE ---------------------------------------------------------------------------------------------------------------11-17
GETTING STARTED GUIDE ----------------------------------------------------------------------------------------------------18
SAFETY EXERCISES --------------------------------------------------------------------------------------------------------------19
WARM-UP EXERCISES -----------------------------------------------------------------------------------------------------------20
MAINTENANCE INSTRUCTIONS --------------------------------------------------------------------------------------------21
BELTADJUSTMENT---------------------------------------------------------------------------------------------------------------22
EXPLODED DRAWING ------------------------------------------------------------------------------------------------------------23
PARTS LIST -------------------------------------------------------------------------------------------------------------------------24-26
ERROR CODE AND SIGNIFICANCE---------------------------------------------------------------------------26-27

4
The main technical parameters
Input supply voltage：220V Working temperature: 0-40 ℃
Speed range: 0.8-20KM/ H Incline range:15 level Motor incline
Max. user weight: 130kg Distance display range: 0.00-99.9km
Calories display range: 000-999 Time display range: 00：00-99：59 (min : sec)
Heart rate range: 50-200 (time / min) Running surface: 400X1400mm
Product size: 1880x810x1410mm Folding size: 1150x810x1600mm
Product Overview

5
WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW SPARE PARTS:
1Main frame 1set D21 Flat washer M10
8PCS
D8Round hex bolt
M10*15 4PCS
C13Safety key 1set
D2 Allen wrench T6 1 PC B18Silicon oil 1 PC D1 Screw driver 1PC D12 Round hex bolt
M10*55 4 PCS
B11L Left side cover 1PC B11RRight side cover 1PC
D48Cross self-
tapping bolt
ST4.2*196PCS
C37Chest belt 1PC
Assembly
instruction

6
STEP 1：According to the following steps to lift up the computer bracket. Be careful not
press the line when folding.
STEP 2：According to the picture to tight the bolt M10*55（D12）and washer M10
（D21）.Then Locked with M10*15(D8) and Flat washer (D21).

7
Step 3: Attach the front cover L(B11L)&R(B11R) to the base frame with bolt ST4.2*19
(D48).
Step 4: Please put on the Safety key (C13).

8
Step5:Plug in bluetooth dual kit
(note: voltage ofr dual kit is 3.3V, and cannot plug into computer/laptop or it will be damaged.)
a. Take out the bluetooth kit and push the cover down to let USB slot appears
b. Then connect the Bluetooth on treadmill
Step5: To check if the running belt runs correctly, placing treadmill in folding position and tightenin
g all the bolts. Then set speed under 3km/h and see if running belt runs without problem.

9
Lift up the machine and force to pull up until
you heard "click" that made by safety casing
stuck the pneumatic cylinder.
Push the safety sleeve with your foot lightly
and pull down the machine at the same time
as the arrow direction. Then the machine will
fall down smoothly.
F
olding instruction
Unfolding instruction

10
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric shock.
This product is equipped with a cord having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product –
if it will not fit the outlet, Please find a proper outlet installed by a qualified electrician.
This product is for use on a nominal 220-voltcircuit and has a grounding plug . Make that the
product is connected to an outlet having the same configuration as the plug. No adapter
should be used with this product.
Grounding Methods

11
1.1.WINDOW DISPLAY
1.2. START
Normal start after 5 seconds countdown
1.3 PROGRAM
1 manual mode，15 pre-setprograms, 3 users, 1 body fat program, 3 countdown function, Bluetooth
connecting dual kit, Polar receiver
1.4.SAFETY LOCK FUNCTION
The window shows"---" when take away the safety lock and the treadmill will stop quickly with "didi"
alarm noise. And put the safety lock on, the computer will display for 2 seconds and the date count
down to “0”
1.5. BUTTON FUNCTION
1.5.1. START/STOP
“START”--When the treadmill is not running, press this button to start, speed is “0.8”.
“STOP”--When the treadmill is running, press this button to stop, then set program default and then
return to manual mode after stopped.
Operation Guide

12
1.5.2 “PROGRAM” BUTTON
When the treadmill is not running, press this button can circle choose from manual mode to pre-set
mode P1-P15,U1-U3and body fat.
1.5.3 “MODE” BUTTON
When the treadmill is not running, press this button to choose countdown
modes:”H-1”,”H-2”,”H-3”;:H-1” is the time countdown mode, and “H-2” is the distance countdown
mode,“H-3” is the calorie countdown mode; press the “SPEED+/-” or “INCLINE+/-“button to adjust
the data. After that, press the“START”button to start this treadmill
1.5.4“SPEED +/-“BUTTON
SPEED +/–--Adjust speed when treadmill start, the increment is 0.1km/time in kilometer. Press the
button more than 2 seconds, and it will be up or down automatically.
1.5.5 SPEED QUICK BUTTON
Press the speed quick button 4km/h，8km/h，12km/h，16km/h to adjust the speed directly when the treadmill
is running
1.5.6 “INCLINE+/-” BUTTON
INCLINE +/ – --Adjust incline when treadmill start; the increment is 1 level/time. Press the button
more than 2 seconds, and it will be up or down automatically
1.5.7 INCLINE QUICK BUTTON
Press the incline quick button 0，5，10，15 to adjust the incline directly when the treadmill is running

13
1.6. DISPLAY FUNCTION
1.6.1 SPEED
Display running speed
1.6.2 TIME
Display the running time or countdown time
1.6.3 DISTANCE
Display the running total distance or distance countdown.
1.6.4 CALORIE
Display the calorie or calorie countdown
1.6.5 INCLINE
Display the incline
1.6.6 PULSE
Display pulse data
1.6.7 ALL WINDOW DISPLAY DATA RANGE
TIME：0:00 – 99.59(MIN)
DISTANCE：0.00 – 99.9(KM)
CALORIES：0.0 – 999 (C)
SPEED：0.8-22.0(km/h)
PULSE：50 – 200 (BPM)
INCLINE：0 – 15
1.7PULSE FUNCTION
When the treadmill is running, hold the hand pulse about 5 seconds, it will display pulse data. The
pulse datarange is 50-200 times/ minute. It has heart-shaped graphics when testing pulse. This
data is only for reference, can not be as medical data.

14
1.8PROGRAM EXERCISE CHART
TIME
MODE SET TIME /10 = EVERY GRADE TIME
1 2 3 4 5 6 7 8 9 10
P1 SPEED 3 3 6 5 5 4 4 4 4 3
INCLINE 0 3 3 3 4 4 4 1 1 0
P2 SPEED 3 3 4 4 5 5 5 6 6 4
INCLINE 2 2 2 3 3 3 3 4 4 2
P3 SPEED 2 4 6 8 7 8 6 2 3 2
INCLINE 3 5 4 4 3 4 4 3 4 2
P4 SPEED 3 3 5 6 7 6 5 4 3 3
INCLINE 0 3 3 2 2 5 5 3 3 2
P5 SPEED 3 6 6 6 8 7 7 5 5 4
INCLINE 3 5 3 4 2 3 4 2 3 2
P6 SPEED 2 6 5 4 8 7 5 3 3 2
INCLINE 3 4 5 6 3 5 5 6 4 3
P7 SPEED 2 9 9 7 7 6 5 3 2 2
INCLINE 0 3 3 3 4 4 4 1 1 0
P8 SPEED 2 4 4 4 5 6 8 8 6 2
INCLINE 1 1 4 4 4 5 5 4 3 2
P9 SPEED 2 4 5 5 6 5 6 3 3 2
INCLINE 3 5 3 4 2 3 4 2 3 2
P10 SPEED 2 5 7 5 8 6 5 2 4 3
INCLINE 1 5 6 8 12 9 10 9 5 3
P11 SPEED 2 5 6 7 8 9 10 5 3 2
INCLINE 3 5 6 8 6 5 8 7 5 2
P12 SPEED 2 3 5 6 8 6 9 6 5 3
INCLINE 5 7 5 8 6 5 9 10 6 2
P13 SPEED 2 4 6 8 7 8 6 2 3 2
INCLINE 3 5 4 4 3 4 4 3 4 2
P14 SPEED 3 3 5 6 7 6 5 4 3 3
INCLINE 0 3 3 2 2 5 5 3 3 2
P15 SPEED 3 6 6 6 8 7 7 5 5 4
INCLINE 3 5 3 4 2 3 4 2 3 2
1.9 Manual model operation
1.9.1 Press start key, time count down 5 seconds, then treadmill will start to work with initial speed 0.8 km/h
1.9.2 Press speed +/-, you can adjust the speed
1.9.3 Press incline+/-, you can adjust the incline
1.9.4 Press stop, you can stop treadmill at working state
1.9.5 Press quick speed key, you can quickly adjust the speed you want
1.9.6 Press quick incline key, you can quickly adjust the incline you want

15
1.103 COUNTDOWN FUNCTION PARAMETER DATA
Countdown time initial setting 30：00 minutes，setting range 5：00---99：00 minutes , each step 1：00.
Countdown calorie initial setting 50therm, setting range 10---990 term，each step 10.
Countdown distance initial setting 1.0km，setting range 0.5---99.9 km，each step 0.1
Scan cycle switch order is: manual, time, distance, calories.
1.11BODY TESTER（FAT）
At the beginning state, press “ PROGRAM” continually to enter “FAT“ body fat test，window display
“FAT”. Press “MODE” to enter (F1 SEX, F2 AGE, F3 HEIGHT, F4 WEIGHT). Press “SPEED+”,
“SPEED-” to set. After setting, the computer willdisplay F5 and grasp the hand pulse, the window
will display your body quality index.
The body quality index is to test the relation between height andweight not the body scale.
The body FAT suits for any male and female to adjust the weight according together with other
body quality index. The ideal FAT should be between 20-25, if under 19, it means too thin. If
between 25 and 29, it means overweight, if over 30, it means obesity. (The data is just for
reference and can not be as medicinal data)
F1—F4and F5parameters reference table below
F-1 SEG 01 MEN 02FEMALE
F-2 AGE 10------99
F-3 HEIGHT 100----200
F-4 WEIGHT 20-----150KG ，40-----350LB
F-5
FAT ≤19 UNDER WEIGHT
FAT =(20---25) NORMAL WEIGHT
FAT =(25---29) OVER WEIGHT
FAT ≥30 OBESITY
1.12 HRC Program
There are3 HRC programs (HRC1-HRC3) in total.
The parameter data setting order is “AGE” ->“THR(HRC) data” ->“TIME”.
HRC: Detect user’s actual heart rate through wireless receiver and set different the heart rate data as goal to
adjust speed and incline during running.
It’s recommended that user uses the wireless chest belt while running HRC function.
1.12.1After turning on the power, press “PROG” key to choose HRC function. HRC function is turned on
when “HRC” characters shown on the screen.

16
User can use “SPEED +/-“ to adjust age (data from 13 to 80) after seeing the “30” shown on the screen.
1.12.2 Press “MODE” key to enter the setting of heart rate. The standard heart rate is fixed at different data
from HRC1 to HRC3. Heart rate data can be adjusted from 50 to 200. User can use “SPEED +/-“ to adjust the
data. (It’s recommended that standard heart rate data doesn’t need to be changed for physical health
condition.)
Formula is calculated as below:
HRC1 is T.H.R =(220-age)x60%,
HRC2 is T.H.R =(220-age)x70%,
HRC3 is T.H.R =(220-age)x80%.
After finishing the setting of HRC data, user can press “MODE” key to modify the time. When “TIME” window
flashes, it displays the default time as 30:00 minutes, and user can press “SPEED+/-“ to set up time.
1.12.3 Enter “START” key to begin the workout (Remember only can press “START” key after all setting is
completed.)
1.12.4 1.12.4 It’s suggested that user use wireless chest belt to detect the heart rate. If chest belt and hand
pulse are used at the same time, data from chest belt will show up only on the screen.
1.12.5 During the operating of HRC, speed and incline will adjust as below:
(1). If Target heart rate <THR-15,then the speed and incline will adjust automatically every 15 second, the
SPEED will increase 0.8KM/h and incline add 1 section until they reach the max. data
(2). If THR-5>Target heart rate >=THR-15,then the speed and incline will adjust automatically every 15
second, the SPEED will increase 0.4KM/h and incline add 1 section until they reach the max. data
(3). If THR+5>=Target heart rate >=THR-5,then the speed and incline will not change
(4). If THR+15>=Target heart rate >=THR+5,then the speed will adjust automatically every 15
second, the SPEED will decrease 0.4KM/h and incline less1 section until they reach the min. data
(5). If Target heart rate >=THR+15,then the speed and incline will adjust automatically every 15
second, the SPEED will decrease 0.8KM/h and incline less2 section until they reach the min. data

17
1.13 Operating procedures of Pafer's APPBluetooth
1.13.1
Afterplugging into the Pafer's APPBluetooth, then the Bluetooth indicator will light up.
1.13.2
When normal operation of communication, the user can choose to use or not to use APP to control
the treadmill.
a. When choose not to use APP, just need normal operate on the treadmill.
b.When choose to use APP, need to connect the Bluetooth with Phone or Pad,after connecting, the
display will shows BTH.
1.13.3 After connecting with the Bluetooth, it could be controlled the treadmill by APP.
a. If it is successful for connecting the Bluetooth when the treadmill is working, then will be
shutdown and into the APP control Mode.
b. If it is unsuccessful for Bluetooth connection, the system to maintain the status quo.
1.14OTHERS
1.14.1The system will enter into power saving mode automatically if there is no any action within 10
minutes under IDLE MODE and there is no display and backlit on the computer. Press any key to
resume the system.
1.14.2Countdown time, countdown calorie and countdown distance, you just can set one of them at
one time, press last item to set running, the setting parameter is countdown, others display normal
data.

21
WARNING：Please make sure pull out the treadmill's power plug before cleaning or
maintaining the product.
CLEANSING：General cleaning or the unit will greatly prolong the treadmill's life.
Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on
either side of the walking belt and also the side rails. This reduces the build up of foreign
material underneath the walking belt. Make sure the shoes are clean. The top of the belt may
be cleaned with a wet soapy cloth. Be careful to keep liquid away from inside the motorized
treadmill frame or from underneath the belt.
WARNING：Always unplug the treadmill from the electrical outlet before removing the motor
cover. At least once a year remove the motor cover and vacuum under the motor cover.
This treadmill's walking belt and deck are equipped with a pre-lubricated, low maintenance
deck system. The belt/ deck friction may play a major role in the function and life of your
treadmill, thus requiring periodic lubrication. We recommend a periodic inspection of the
deck.
We recommend lubrication of the deck according to the following timetable:
Light user (less than 3 hours/ week) Every 60 days
Medium user (3-5 hours/ week) Every 45 days
Heavy user (more than 5 hours/ week) Every 30 days
We suggest you buy lubricating oil from local distributors or contact our company directly.
Pay attention, any other maintains please ask professionals for help.
Maintenance Instruction

22
Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the
running belt deviate condition.
If the belt has drifted to the right, unplug the
safety lock and power switch, and turn the
right adjusting bolt 1/4 turn clockwise, then
insert the power switch and safety lock, make
the treadmill running, observe the running belt
deviate condition. Repeat above steps until the
running belt be placed in the middle. See
picture A
Once the treadmill belt swerving to the left,
unplug the safety lock, turn off the power, then
with the left adjusting bolt clockwise rotation 1 /
4 laps, and turn on the safety lock and power
to make treadmill running, checking the
deviation of the treadmill belt. Repeat the
above steps until the belt centered. See
picture B
The treadmill belt will gradually relax after
above steps or after a period of time using,
unplug the safety lock, and turn off the power,
with the two adjusting bolt clockwise rotation 1
/ 4 laps, and turn on the safety lock and power
to make treadmill running, then standing on
the belt to confirm the tightness. Repeat the
above steps until the belt moderate tightness.
See picture C
Belt Adjustment

23
Exploded Drawing
D16
D1
D12
D45
D28
D28
C15
B21
B2
D31
D25
D23
C1
A11
B9
B6
B6
C10
C11
B3
B3
B21
D21 D18
B10
B10
D23
D48
D51
D51
D42

24
A Welding Parts
No. Description QTY No. Description QTY
A1 Main frame 1 A5Incline bracket 1
A2 Base frame 1 A6Filter bracket 1
A3L Left upright 1 A7Running board support tube 1
A3R Right upright 1 A11 Motor bracket 1
A4Console bracket 1
B Plastic Parts
No. Description QTY No. Description QTY
B1 Console set 1 B16R
Right end cap 1
B1-1 Overlay 1 B17 Adjusting wheel 4
B1-2 Membrane key 1 B18 Silicon oil 1
B1-3 Console 1 B19 Cable organizer 1
B2 Console cover 1 B20 Round cable plug 1
B3 Protecting foam 2 B21 Square shape plug 4
B4 Handrail plug 2 B22 Left motor cover 1
B6 Transporting wheel plug 2 B23 Right motor cover 1
B8 Flat foot pad 2B25Tablet holder 1
B9 U shape foot pad 2 B27 New cushion 6
B10 Limited cushion 2 B31 Rubber pad 2
B11L Left side cover 1 B32 Oval cushion 4
B11R Right side cover 1 B44 EVA pad 1
B13 Motor upper cover 1 B51 Water bottle holder 2
B15 Side rail 2 B63 Wave-shaped cushion 2
B16L Left end cap 1
Parts list