TOORX TRX46S User manual

Ed : 03/17 Rev : 00
INSTRUCTION

1
CONTENT
CONTENT -------------------------------------------------------------------------------------------------------------------------------- 1
IMPORTANT SAFETY PRECAUTIONS ----------------------------------------------------------------------------------2-3
ASSEMBLY INSTRUCTIONS -------------------------------------------------------------------------------------------------3-5
FOLDING & UNFOLDING INSTRUCTIONS ------------------------------------------------------------------------------6
GROUNDING METHODS ----------------------------------------------------------------------------------------------------------7
OPERATION GUIDE -------------------------------------------------------------------------------------------------------------8-12
GETTING STARTED GUIDE ----------------------------------------------------------------------------------------------------13
SAFETY EXERCISES --------------------------------------------------------------------------------------------------------------14
WARM-UP EXERCISES -----------------------------------------------------------------------------------------------------------15
MAINTENANCE INSTRUCTIONS --------------------------------------------------------------------------------------------16
BELT ADJUSTMENT ----------------------------------------------------------------------------------------------------------------17
EXPLODED DRAWING -------------------------------------------------------------------------------------------------------------18
PARTS LIST -------------------------------------------------------------------------------------------------------------------------19-20
ERROR CODE AND SIGNIFICANCE----------------------------------------------------------------------------- 21

3
WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW SPARE PARTS:
Treadmill 1set D17 Washer M8 8PCS D13 Bolt M8*15 4PCS C13 Safety key 1p
D3 Allen wren h
5MM, 1 PCS
B18 sili on oil 1 PC D1 S rew driver 1 PCS D16 Bolt M8*45
4PCS
B11L Left front over
1 PC
B11R Right front over 1
PC
D49 S rew ST4.2*20 4
PCS
Assembly
instruction

4
STEP 1：According to the following steps to lift up the computer bracket. Be careful not
press the line when folding
STEP 2：Lock the lower part of treadmill with Bolt M8*45 (D16), M8*15 (D13) and Washer (D17),
then lock the upper part of the treadmill with M8*15 (D13) and Washer (D17).
D13
D13
D13
D16
D16

5
Step 3: Lock the Left front cover(B11L) and Right front cover (B11R) with Screw ST4.2*20 (D49),
then put on the Safety key (C13).
ATTENTION: Must confirm complete assembly as the required above and lock all bolts. Do
the following operations after checking everything is OK. Before you use the treadmill,
please read the instructions carefully.
B11L
B11R
D49
D49

6
Lift up the machine and force to pull up until
you heard "click" that made by safety casing
stuck the pneumatic cylinder.
Kick the safety sleeve lightly and pull
down the machine at the same time as the
arrow direction. Then the machine will fall
down smoothly.
F
olding instruction
U
nfolding instruction

7
This product must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product –
if it will not fit the outlet, Please find a proper outlet installed by a qualified electrician.
. This product is for use on a nominal 220V circuit and has a grounding plug . Make that the
product is connected to an outlet having the same configuration as the plug. No adapter
should be used with this product.
Grounding Methods

8
1.1. WINDOW DISPLAY
1.2. START
Normal start after 3 seconds countdown
1.3 PROGRAM
1 manual mode，12 pre-set programs, 3 HRCs, 1 body fat program, 3 countdown function
1.4. SAFETY LOCK FUNCTION
The window shows "OFF" when take away the safety lock and the treadmill will stop quickly .
1.5.BUTTON FUNCTION
1.5.1. START/STOP
“START”--When the treadmill is not running, press this button to start, initial speed is “0.8”.
“STOP”--When the treadmill is running, press this button to stop.
1.5.2 “PROGRAM” BUTTON
When the treadmill is not running, press this button can circle choose from manual mode to pre-set
mode P1-P12,HRC-3 and body fat;
Operation Guide

9
1.5.3 “MODE” BUTTON
When the treadmill is not running, press this button to circle choose countdown
Modes from manual mode,time countdown mode, distance countdown mode, and the calorie countdown
mode.
1.5.4 “SPEED +/- “BUTTON
SPEED +/– --Adjust speed when treadmill start, the increment is 0.1km/time in kilometer. User can adjust the
data when treadmill stop,
1.5.5 SPEED QUICK BUTTON
Press the speed quick button 3km/h, 6km/h, 9km/h to adjust the speed directly when the treadmill is
running.
1.5.6 “INCLINE+/-” BUTTON
INCLINE +/ – --Adjust incline when treadmill start; the increment is 1 level/time. Press the button
more than 2 seconds, and it will be up or down automatically
1.5.7 INCLINE QUICK BUTTON
Press the incline quick button 3, 6, 9 to adjust the incline directly when the treadmill is running
1.6. DISPLAY FUNCTION
1.6.1 PROGRAM
Display program number, it displays “----” when in manual mode.
1.6.2 TIME
Display the time
1.6.3 SPEED
Display running speed
1.6.4 INCLINE/PULSE
1.6.4.1 Display the pulse data when “Pulse” flash
1.6.4.2 Display the incline when “incline” flash, the display range is 0~12,it will display the pulse first when
there’s the pulse dictated.
1.6.5 DISTANCE/ CALORIE
Display the running total distance and calories, it will exchange the data every 5 seconds.
1.6.6 ALL WINDOW DISPLAY DATA RANGE
TIME：0:00 – 99.59(MIN)

10
DISTANCE: 0.00 – 99.9(KM)
CALORIES: 0 – 999 (C)
SPEED: 0.8-16.0(km/h)
PULSE: 50 – 200 (BPM)
1.7PULSE FUNCTION
When the treadmill is running, hold the hand pulse about 12 seconds, it will display pulse data. The
pulse data range is 50-200 times/ minute. It has heart-shaped graphics when testing pulse. This
data is only for reference, can not be as medical data.
1.8PROGRAM EXERCISE CHART
TIME INTERVAL
MODE
SET TIME / 16 = EVERY GRADE TIME
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 SPEED 4 6 6 6 10 10 6 6 6 4 4 2 6 6 4 4
INCLINE 0 0 2 2 2 2 2 2 2 2 4 4 4 2 2 0
P2 SPEED 2 2 8 2 2 8 8 12 4 4 12 4 4 12 4 2
INCLINE 0 2 2 2 6 6 2 2 4 4 2 2 4 2 2 0
P3 SPEED 2 4 8 8 4 4 8 8 10 10 12 4 4 8 4 4
INCLINE 0 2 2 4 4 6 4 6 4 2 2 2 4 2 2 0
P4 SPEED 4 6 6 6 12 12 12 12 6 6 4 4 4 6 6 2
INCLINE 0 2 2 4 4 6 8 8 6 6 6 4 4 2 2 0
P5 SPEED 2 4 6 12 12 12 4 4 4 4 12 12 12 6 4 2
INCLINE 0 2 4 6 4 2 2 0 0 2 2 2 2 2 4 0
P6 SPEED 4 4 6 6 6 6 8 8 6 6 8 8 6 8 6 4
INCLINE 0 2 4 4 4 4 4 2 2 2 2 2 2 2 2 0
P7 SPEED 4 8 8 8 8 4 4 12 12 4 4 8 8 4 4 2
INCLINE 0 2 2 2 2 4 4 4 4 4 4 2 2 2 2 0
P8 SPEED 2 2 6 6 6 8 8 10 10 12 8 6 6 6 4 4
INCLINE 0 2 2 4 2 2 2 4 2 2 2 4 2 2 2 0
P9 SPEED 2 4 8 10 2 4 8 10 2 4 10 2 4 10 4 2
INCLINE 0 2 2 4 4 6 6 8 8 10 8 6 4 2 2 0
P10 SPEED 4 6 6 8 8 8 10 10 10 8 8 6 8 6 4 4
INCLINE 0 2 2 4 6 6 6 4 4 4 2 2 2 2 2 0
P11 SPEED 4 6 6 8 8 8 6 8 6 8 6 10 6 10 8 4

11
1.9 Manual model operation
1.9.1 Press start key, time count down 3 seconds, then treadmill will start to work with initial speed 0.8km/h
1.9.2 Press speed +/-, you can adjust the speed
1.9.3 Press incline+/-, you can adjust the incline
1.9.4 Press stop, you can stop treadmill at working state
1.9.5 Press quick speed key, you can quickly adjust the speed you want
1.9.6 Press quick incline key, you can quickly adjust the incline you want
1.10 3 COUNTDOWN FUNCTION PARAMETER DATA
Countdown time initial setting 30：00 minutes，setting range 5：00---99：00 minutes , each step 1：00.
Countdown calorie initial setting 50therm, setting range 10---995 term，each step 10.
Countdown distance initial setting 1.0km，setting range 0.5---99.5 km，each step 0.1
1.11 BODY TESTER（FAT）
When treadmill is not running, press “ PROGRAM” continually to enter “FAT“ body fat test，window display
“FAT”. Press “MODE” to enter (-1-,-2-,-3-,-4-) and defaulted data. Press “SPEED+”, “SPEED-” to set.
After setting, press again the “MODE”.the computer will display “-5-” and “---” to enter state testing, hold the
L/R handle pulse and it will display your body quality index after around 5 seconds.
The body quality index is to test the relation between height and weight not the body scale.
The body FAT suits for any male and female to adjust the weight according together with other
body quality index. The ideal FAT should be between 20-25, if under 19, it means too thin. If
between 25 and 29, it means overweight, if over 30, it means obesity. (The data is just for
reference and can not be as medicinal data)
01 Sex01 Male 02 Female
02 Age10------99
03 Height 100----200
04 Weight 20-----150
05 FAT≤19 Under weight
FAT= (20---25) Normal weight
FAT= (25---29) Over weight
INCLINE 0 2 2 2 4 4 4 4 4 4 6 6 6 4 4 0
P12 SPEED 4 6 8 10 8 6 4 6 8 12 8 6 8 12 12 6
INCLINE 0 2 2 4 4 6 6 8 8 6 6 4 4 2 2 0

12
FAT≥30 Obesity
1.12 Heart Rate Control (HRC)
Heart Rate controls the speed and inclines (user need to take the wireless chest belt)
Press Mode and choose HRC, the treadmill will start to run after 3 seconds after switch on, 3 minutes of
preheating to enter HRC function. When it run, if the real heart rate is lower than the defaulted heart rate, the
incline go up (not exceed the HRC maximum), speed up (not exceed the HRC maximum), until the real heart
rate reach the defaulted target heart rate. If the real heart rate is higher than the defaulted target heart rate,
the incline go down (till to the minimum 0), the speed won’t go up (until the HRC minimum); all the HRC
maximum speed is 4km, the incline is 12 section.
HRC1 speed maximum 80KM
HRC2 speed maximum 90KM
HRC3 speed maximum 100KM
Automatic heart rate control mode as show below, the system will proceed the control judge each 10
seconds.
1. When the result of real heart rate - target heart rate is higher than 5,
The incline will go down 1 section each time, until to 0,
Then speed reduction 0.5km each time, until to the minimum.
2. When the result of target heart rate – real heart rate is higher than 10,
The incline will go up 1 section each time, until to 12,
Then speed up 0.5km each time, until to the maximum.
3. When the real heart rate is equal to the target heart rate,
The incline and speed will keep unchanged.
4. When the program run to the last two programs, the incline will go down to 0,
Speed reduction 0.5km each time, until to the minimum.
1.13 OTHERS
1.13.1The system will enter into power saving mode automatically if there is no any action within 10
minutes under IDLE MODE and there is no display and backlit on the computer. Press any key to
resume the system.
1.13.2Countdown time, countdown calorie and countdown distance, you just can set one of them at
one time, press last item to set running, the setting parameter is countdown, others display normal
data

16
WARNING：Please make sure pull out the treadmill's power plug before cleaning or
maintaining the product.
CLEANSING：General cleaning or the unit will greatly prolong the treadmill's life.
Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on
either side of the walking belt and also the side rails. This reduces the build up of foreign
material underneath the walking belt. Make sure the shoes are clean. The top of the belt may
be cleaned with a wet soapy cloth. Be careful to keep liquid away from inside the motorized
treadmill frame or from underneath the belt.
WARNING：Always unplug the treadmill from the electrical outlet before removing the motor
cover. At least once a year remove the motor cover and vacuum under the motor cover.
This treadmill's walking belt and deck are equipped with a pre-lubricated, low maintenance
deck system. The belt/ deck friction may play a major role in the function and life of your
treadmill, thus requiring periodic lubrication. We recommend a periodic inspection of the
deck.
We recommend lubrication of the deck according to the following timetable:
Light user (less than 3 hours/ week) Every 60 days
Medium user (3-5 hours/ week) Every 45 days
Heavy user (more than 5 hours/ week) Every 30 days
We suggest you buy lubricating oil from local distributors or contact our company directly.
Pay attention, any other maintains please ask professionals for help.
Maintenance Instruction

17
Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the
running belt deviate condition.
I f the belt has drifted to the right, unplug the
safety lock and power switch, and turn the
right adjusting bolt 1/4 turn clockwise, then
insert the power switch and safety lock, make
the treadmill running, observe the running belt
deviate condition. Repeat above steps until the
running belt be placed in the middle. See
picture A
Once the treadmill belt swerving to the left,
unplug the safety lock, turn off the power, then
with the left adjusting bolt clockwise rotation 1 /
4 laps, and turn on the safety lock and power
to make treadmill running, checking the
deviation of the treadmill belt. Repeat the
above steps until the belt centered. See
picture B
The treadmill belt will gradually relax after
above steps or after a period of time using,
unplug the safety lock, and turn off the power,
with the two adjusting bolt clockwise rotation 1
/ 4 laps, and turn on the safety lock and power
to make treadmill running, then standing on
the belt to confirm the tightness. Repeat the
above steps until the belt moderate tightness.
See picture C
Belt Adjustment

18
Exploded Drawing

19
A. Welding parts
No. Des ription Qty No. Des ription Qty
A1 Main frame 1 A5 In line bra ket 1
A2 Base frame 1 A6 Filter supporter 1
A3L Left upright tube 1 A11 Motor bra ket 1
A3R Right upright tube 1
A4 Handrail bra ket 1
B. Plastic parts
No. Des ription Qty No. Des ription Qty
B1 Computer hip 1 B16R Right rear over 1
B1-1 Overlay 1 B17 Adjust wheel 2
B1-2 Membrane key 1 B18 Sili on oil 1
B1-3 Computer panel 1 B19 Power line bu kle 1
B2 Computer over 1 B20 Line prote t plug 1
B3 foam 2 B21 Inner plug 4
B4 Pipe plug 2 B25 Bookshelf 1
B6 Transport wheel plug 2 B27 Cushion 6
B7 Transport wheel 2 B31 Rubber ushion 2
B8 Foot pad 2 B32 Oval ushion 4
B9 Foot pad 2 B34 Rubber ushion 1
B10 Limited ushion 2
B11L Left front over 1
B11R Right front over 1
B13 Motor over 1
B14 Motor bottom over 1
B15 Side rails 2
B16L Left rear over 1
C. Drive parts
No. Des ription Qty No. Des ription Qty
C1 DC motor 1 C14 Single line 1
C2 Running belt 1 C15 Power line 1
C3 Rear roller 1 C16 Upper line 1
Parts list
Parts list

20
C4 Front roller 1 C17 Lower line 1
C5 Running board 1 C20 Magneti ring 1
C6 ylinder 1 C21 Indu tor 1
C7 Motor belt 1 C22 Filter 1
C8 Power swit h 1 C27 Single line 1
C9 Controller 1 C28 Speed sensor 1
C10 Left short keys 1 C29 pulse 2
C11 Right short keys 1
C12 In line motor 1
C13 Safety key 1
D. Hardware parts
No. Des ription Qty No. Des ription Qty
D1 S rew driver 13-15-17 1 D30 Bolt M6X60 2
D3 Allen wren h T5 1 D31 Bolt M8X20 4
D9 Bolt M10X30 1 D35 Bolt M8X80 1
D10 Bolt M10*45 4 D42 Bolt M4X10 6
D11 Bolt M10*50 3 D45 Bolt M5X15 7
D13 Bolt M8X15 4 D46 Bolt M5X20 4
D14 Bolt M8X30 1 D47 S rew ST4.2X16 13
D15 Bolt M8X40 4 D49 S rew ST4.2X20 4
D16 Bolt M8X45 7 D50 S rew ST4.2X25 2
D17 Washer M 8 8 D52 S rew ST4.2X16 23
D18 Nylon nut M10 8 D59 S rew ST2.9X19 4
D20 Nylon nut M8 8 D60 Bolt M6X20 8
D21 washer M 10 8
D23 washer M 8 17
D24 Spring washer M5 1
D25 Spring washer M8 4
D29 Bolt M6X45 1

GARLANDO SPA
Via Regione Piemonte, 32 - Zona Industriale D1
15068 - Pozzolo Formigaro (AL) - Italy
www.toorx.it - [e-mail]