TOORX MIRAGE C60 User manual

Ed : Rev : Cod :
INSTRUCTION
03/21 GRLDTOORXTRXMC600

3
NO.
DES.
Specification
Nos.
NO.
DES.
Specification
Nos.
A
Main frame
1
C55
Silicone oil
1
B09
6# Allen wrench
1
D09
Power wire
1
C39
Safety key set
1

4

5

6

7

8

9

10

11

12
LATERAL FOLDING

13

14
VERTICAL FOLDING

15

16

18
OPERATION GUIDE
BUTTON FUNCTIONS:
1. INSTANT INCLINE: Press 3-6-9-12 to choose incline quickly.
2. INCLINE-/INCLINE+：Press triangle button to adjust the incline.
3. PROG: Press this button to choose between 24 programs, 4 user, 4 HRC and body fat.
4. START: Press this button to start the machine at any time.
5. START/PAUSE/STOP: Press the middle knob button to start/pause/stop the machine, turn left/right
to adjust the speed.
--Under program selecting state, turn the knob button to choose program(P01-P24, U01-U04,
HP1-HP4, FAT), press the knob button to enter into the program, adjust the parameters, then short
press to start the machine or long press to go back to standby mold.
--Under manual mode, press the knob button, the treadmill will be started after 3seconds countdown;
--Under pause mode, quick press this knob button to re-start the machine;
--Under pause mode, long press this knob button for 3 seconds, the machine will be stop and reset;
--Under standby mode, turn the knob clockwise to speed up the machine, and turn the knob
counterclockwise to slow down the machine.
6. MODE: Press this button to choose between time, distance, calories workout targets.
7. STOP: Press this button to pause or stop the machine.
8. INSTANT SPEED: Press 3-6-9-12 to choose speed quickly.
9. SPEED-/SPEED+：Press this button to adjust the speed.
MEDIA HUB:
1. MP3 INPUT: Insert MP3 cable to display the music from device.

19
2. USB INPUT: Insert USB to charge device.
COMPUTER FUNCTIONS:
1. CALORIES/PACE: Display the calories has consumed, PACE is to display the time you walked 1
kilometer.
2. TIME: Display the time has run.
3. DISTANCE/STEP: Display the distance has run, STEP is to display the total steps you have walked.
4. INCLINE/ALTITUDE: Display current incline. Press INCLINE triangle button to adjust the incline of
the machine. ALTITUDE is to display the altitude.
5. SPEED: Display current speed. Press SPEED+/- to adjust the speed of the machine.
6. PULSE: Display user’s heart rate, this data is just for reference, can not be regarded as medical use.
Hold the hand pulse sensor by both hands, the console will show user’s pulse value after about 5
seconds.
7. MODE: Press Mode button to enter TIME, DISTANCE, CALORIES.
-From standby mode, press Mode button, the corresponding light of TIME, DISTANCE, CALORIES will
shown on , select between TIME, DISTANCE, CALORIES.
-Press SPEED+/- or INCLINE triangle button or turn the knob to set the workout target value.
-Press START button, treadmill will run after 3 seconds.
-Press SPEED+/- to adjust the speed .
-Press INCLINE triangle button to adjust the incline .
8. PROGRAMS:Press this button to choose between 24 programs, 4 user, 4 HRC and body fat.
8.1 Set of 24 build-in programs: From standby mode, press PROG button, console will show 24
programs, select between 24 programs.
-Press SPEED+/- or INCLINE triangle button or turn the knob button to set the workout target value.
-Each program can be divided into 10 sections; machine will beep 3 times when starting a new section.
-Press SPEED+/- or turn the knob button or INCLINE triangle button to change the speed and incline
during each section.
-Machine will beep 3 times and stop when the program is finished.
8.2 Set of 4 user programs: From standby mode, press PROG button until you see U1,U2,U3,U4;
- Press SPEED+/- or INCLINE triangle button or turn the knob button to set the time.
- Press MODE button to confirm and enter next section, repeat until you finish the setting of all 30
sections.
- Press SPEED+/- or INCLINE triangle button or turn the knob to change the speed or incline.
- Set the running time and press START to begin.
8.3 Set of 4 heart rate programs: From standby mode, press PROG button until you see
HP1,HP2,HP3,HP4;To use this function, you need a chest belt. The chest belt need to close to the skin
of your chest.
-Max speed is 10.0km/h.
-Press MODE button, the window will show default age of 30, pressing INCLINE triangle button or
SPEED+/- or turn the knob button to choose your age, heart rate value and time setting.
-Set the running time and press START to begin.

20
-Under heart rate program, you can press SPEED+/- or INCLINE triangle button or turn the knob button
to change speed and incline, but the system will adjust speed and incline to reach your target heart rate
value.
8.4 Set of body fat test: From standby mode, press PROG button until you get to FAT.
-Press Mode button to enter information.
Set value with SPEED+/- or the knob button from F-1 to F-4(F-1 GENDER, F-2 AGE, F-3 HEIGHT, F-4
WEIGHT)
-Press Mode button to enter F-5(F—5 BODY FAT TEST), hold hands on the hand pulse sensor, the
console will display your body fat value after 3 seconds.
-The body fat value is intended as a guide, and is not medical data:
LUBRICATION REMIND FUNCTION
This machine has lubrication remind function.After every total running distance of 300km ,
treadmill screen will remind with lubrication. Please read the user’s manual first, and add
the oil to the middle part of running board.
SAFETY LOCK FUNCTION:
Under any mode, if you pull away the safety key, the machine will stop. The window will
show “---”with reminding sound. The machine cannot work until safety key is inserted
back.
ENERGY SAVING FUNCITON
To reduce energy consumption, this treadmill will enter into sleeping mode if without any
operation for 10 minutes. The screen will give reminding before enter into sleeping mode.
Once machine enter sleeping mode, please take off safety key and insert again to awaken
the system.
POWER ON （ ）AND POWER OFF（ ）
Switch off the power: You can switch off the power to stop the treadmill, this will not cause
F-1
Gender
01 male
02 female
F-2
Age
10-99
F-3
Height
100-200CM
F-4
Weight
20-150KG
F-5
FAT
≤19
Under weight
FAT
=(20---25)
Normal weight
FAT
=(26---29)
Overweight
FAT
≥30
Obesity

22
MAINTENANCE & CARE
General cleaning will help prolong the life and performance of your treadmill. Keep the unit
clean and maintained by dusting the components on a regular basis. Clean both sides of
the running belt to prevent dust from accumulating underneath the belt. Keep your running
shoes clean so that dirt from your shoes does not wear out the running board and belt.
Clean the surface of the running belt with a clean damp cloth.
➢To better maintain the treadmill and prolong its life it is suggested that the machine be
powered off for 10 minutes every 2 hours and fully powered off whenever not in use.
➢Aloose Running Belt will result in the runner sliding off when running, while too tight of a
Running Belt will result in decrease to the motors performance and also create more
friction between the roller and running belts. The most suitable tightness for the belts is
pulled out 50-75mm from the Running Board.
CENTERING THE RUNNING BELT:
Place the treadmill on level ground and set it at 6-8kph to check if the Running Belt drifts.
1. If the Running Belt moves to the right,
turn the adjusting bolt on the right side ¼
turn clockwise, then turn the left
adjustment bolt ¼ turn counter-clockwise.
If the belt does not move, repeat this step
until it centers. Refer to figure A.
2. If the Running Belt moves to the left,
turn the adjusting bolts on the left side ¼
of a turn clockwise, then turn the right
adjustment bolt ¼ turn counter-clockwise.
If the belt does not move, repeat this step
until it centers. Refer to figure B.
3. Over time the Running Belt will
loosen. To tighten the belt turn the Left &
Right side adjustment bolts one full turn
clockwise, check the tension of the belt.
Continue this process until belt is at the
correct tension. Make sure to adjust both
sides equally to ensure correct belt
alignment. Refer to figure C.

23