Volvo 8637377 User manual

Instruction No Version Part. No.
31266687 1.2 8637377
Trip computer
Instruction No Version Part. No.
31266687 1.2 8637377
Trip computer
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation Trip computer - 31266687 - V1.2
страница 1 / 4

Equipment
A0000162 A0801178
IMG- 213320
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation Trip computer - 31266687 - V1.2
страница 2 / 4

INTRODUCTION
Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to
minimise the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available
before starting installation.
Certain steps in the instructions are only presented in the form
of images. Explanatory text is also given for more complicated
steps.
In the event of any problems with the instructions or the
accessory, contact your local Volvo dealer.
1
Turn the ignition key to position 0
Move the steering wheel to its rearmost position.
2
J8504703
Carefully pry the upper steering column cover off the lower
cover. Using a plastic weatherstrip tool, pry at the rear edge in
the join between the steering column covers. The steering
column covers are secured to each other by catches (1) on the
inside
Fold the upper steering column cover towards the combined
instrument panel. Secure it in the folded up position.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation Trip computer - 31266687 - V1.2
страница 3 / 4

3
J8504704
Remove the upper screws (1) from the lower steering column
cover
Unscrew the lower screw (2) a few turns
Fold the lower steering column cover down slightly, so that the
mounting point for the left-hand control stalk is exposed.
4
J3904663
Remove the left -hand control stalk. First remove the two screws.
Then carefully pull the stalk outwards until it releases from the
connector on the inside.
5
Press the new stalk into place where the old one was
positioned. Tighten the stalk using the existing screws
Reinstall the lower steering column cover. Tighten
Reinstall the upper steering column cover.
6
Program the function using VCT2000 in VIDA.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation Trip computer - 31266687 - V1.2
страница 4 / 4