Whalen Kendal Desk User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Manufacturing Page 1 Factory No. 15548
Date 2014-12-16 Rev. 1 Factory: DOGULU
Kendal Desk
Model #ECOM-KDS
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenfurniture.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED: / /

Model #ECOM-KDS
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 2 Factory No. 15548
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Kendal Desk (ECOM-KDS)
DATE OF MANUFACTURE: January 2015
MADE IN CHINA
SPECIAL NOTE
Please read the instruction sheets completely before assembly. Examine all packaging
material before discarding carton. Remove any remaining staples from the carton before
discarding. Remove all parts from carton and separate into groups as indicated on part
list. Please ensure all parts are included prior to assembly. Use of power tools to
complete assembly is not recommended.
THIS UNIT IS INTENDED FOR USE ONLY WITH THE
MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE
MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING
POSSIBLE INJURY.
M
A
X
IMUM
L
OAD 30 lb.
(
13.6 k
g)
M
A
X
IMUM
L
OAD 200 lb.
(
90.
7
k
g)
MAXIMUM RECOMMENDED WEIGHT LOADS

Model #ECOM-KDS
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 3 Factory No. 15548
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Desk Top (1) B- Desk Leg (4)
(1) Ø5/16" x 65 mm Bolt (2) Lock Washer (3) Flat Washer
(8+1 extra) (8+1extra) (8+1extra)
(4) M10 x 30 mm Wood Dowel (4+1 extra) (5) Handle (2) (6) 22 mm Handle Bolt (2)
5 mm Allen Wrench (1) Touch-up Pen (1)
Tools required: Allen wrench (provided).

Model #ECOM-KDS
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 4 Factory No. 15548
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Position the Desk Top (A) upside down on a level and protective surface, as shown.
3. Insert four Wood Dowels (4) into the corner holes of the Desk Top (A). Position 4 Legs (B) onto the
inserted Wood Dowels (4) and attach to the apron corners of Desk Top (A) using the 65 mm Bolts (1)
with Lock Washers (2) and Flat Washers (3) through the corner blocks and securely screw into the
threaded inserts in Legs, using with the enclosed Allen wrench. As shown.
Ø5/16" x 65 mm Bolt
(8 used in this step)
①
Wood Dowel
(4 used in this step)
④
123
A
B
A
B
4
A
B
B
B
B
Lock Washer
(8 used in this step)
②
Flat Washer
(8 used in this step)
③

Model #ECOM-KDS
Please call for replacement parts or assistance: 1-866-942-5362
Whalen Furniture Manufacturing Page 5 Factory No. 15548
Assembly Instructions
4. Ask for assistance to stand the unit upright and position it at the desired location.
5. Attach two Handles (5) to the front side of drawer front with the provided Handle Bolts (6).
6. You can flip down the drawer front to convert it into a keyboard tray. If you need to remove the pullout
drawer, please pull the drawer all the way out, then simultaneously push the plastic release lever of the
ball bearing slides up on one side and down on the other side, and then pull the drawer completely out.
As shown.
NOTE: To place the drawer back, simply push the ball bearing cart all the way to the end of the slides
(in both sides), and align the slide runners on the drawer with the slide tracks on the unit. Push it
carefully inside until it stops. If the drawer does not go in smoothly, please take it out and repeat the step.
6
5
Handle
(2 used in this step)
⑤
22 mm Handle Bolt
(2 used in this step)
⑥