Wine racks America Lattice Cube Stemware User manual

Lattice Cube - Stemware
Assembly GUIDE
Cordless Drill
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
Package Contents tools for assembly
Page 1
or visit
wineracksamerica.com
Questions?
888.373.6057
WOOD SCREWS
SIDE LADDERS (X2)
BOTTOM PANEL
Screwdriver
TOP PANEL
Required
Suggested
SCAN FOR
ASSEMBLY VIDEO

Assembly GUIDE or visit
wineracksamerica.com
Questions?
888.373.6057
Lattice Cube - Stemware
Page 2
1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding
with a utility knife. Check the parts list to verify package contents.
2.
Secure the bottom panel to the bottom of each side ladder using the provided wood screws. The end with the larger
gap is the top of your rack. (figure 1)
1
SECURE BOTTOM
PANEL
3. Attach the top panel to the top of each side ladder using the provided wood screws. (figure 2)
2
SECURE TOP
PANEL
Top of rack
4. That’s it! Fill with your favorite stemware and vintage. Stack multiple cubes for a true wine cellar look.