Wine racks America Half Height X Bin User manual

Half Height X Bin
Assembly GUIDE
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
Package Contents tools for assembly
Page 1
or visit
wineracksamerica.com
Questions?
888.373.6057
TOP PANEL (x1) SHELF PANEL (x2)
SIDE PANEL (x2)
TRIM PIECE (x1)
WOOD SCREWS FINISH NAILS WOOD PUTTY
Cordless Drill Finish Nailer
Hammer Nail Setter
Wood Glue
Required
Suggested
Screwdriver
X PANEL (x2)
Trim Piece
Side Panel
Side Panel
Shelf Panel
Attach Trim Piece to the
Side Panels using a nail
gun or the provided
finish nails.
Top Panel
Shelf Panel
X Panel

Assembly GUIDE Page 2
or visit
wineracksamerica.com
Questions?
888.373.6057
Half Height X Bin
If you purchased a solid top, secure it by placing a small amount of wood glue on the top of the box frame. Clamp
the top to the frame using standard wood clamps until fully dry. (figure 8)
WINERACKSAMERICA.COM
360 North 700 West Suite F • North Salt Lake, UT 84054
(toll free) 888-373-6057
(fax) 801-936-0534
Once again, thank you for your business. Remember, customer
service is available to answer any questions Monday-Friday
7:00 am - 5:00 pm MST. Please feel free to contact us for any
wine storage needs.
We would love to see your wine racks in use! Please feel free to
send any photos of your racks to [email protected]