Xiaomi Mi Electric Scooter 1S User manual

K010P0527-A0
Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions
may vary due to product enhancements.
Original instructions
Mi Electric Scooter 1S
Mi Electric Scooter Pro 2
User Manual
DDHBC11NEB
DDHBC05NEB
DDHBC08NEB

02
EN ScrewEN
01
User Manual
EN
Package Contents
T-shape Allen Key
EN Important Information Specifications
EN
TireEN
EN Extension Nozzle
Power AdapterEN
1 2
2
1
EN EN
Assembly and Set-Up
Fold the handlebar stem up, fasten it, and put
down the kickstand.
Install the handlebar onto the stem.
Tighten the screws onto both sides of the stem with the T-
shaped Allen key.
3EN

1EN Lift up the rubber flap. 2EN Plug the power adapter into the charging
port.
3EN Unplug when charging is completed. 4EN Put back the rubber flap.
Charge Your Scooter
EN The scooter is fully charged when the LED on the charger
changes from red (charging) to green (trickle charge).

1EN 2EN
4EN
3EN
Connect with Mi Home / Xiaomi Home App
The scooter without being activated will keep beeping
when turned on, and its speed is limited to 10 km/h.
Scan the QR code to download and install the app.
Open Mi Home / Xiaomi Home app.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the
default.
Tap "+" on the upper right, and then follow prompts to
add your device.
5EN 6EN
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Follow the on-screen instructions in the app to activate
your scooter for the first use. The beeping sound will not stop until the scooter
is activated.

0
V≥5km/h
3EN
5EN
4EN
6EN
Tilt your body to the steering direction as you turn, and
slowly turn the handlebar.
The accelerator initiates once the coasting speed
exceeds 5 km/h.
Put down the kickstand when parking.
Release the accelerator and squeeze the brake lever
for a sudden brake.
2EN 1EN Warning: Wear a helmet, elbow pads and knee pads. Step on the deck with one foot, and slowly kicks off the
other on the ground.
How To Ride

Watch out for safety risks.
Safety Reminder
EN
Always steer clear of obstacles.Keep your speed between 5-10 km/h when you ride through speed
bumps, elevator door stills, bumpy roads or other uneven surfaces.
10
5
EN
other overhead obstacles.
Do not press the accelerator when you're
walking alongside the scooter.
EN EN
EN Do not ride in traffic lanes or residential areas where
vehicles and pedestrians are both allowed.
EN Do not abruptly change the steering direction at high speed.
Do not try dangerous actions.
EN Do not hang bags or other heavy stuff on the handlebar.EN Do not ride on one foot.

Do not try dangerous actions.
EN
EN EN Do not use mobile phone or wear earphones when
operating the scooter.
EN
Do not accelerate when going downhill, and brake in time
to slow down. When encountering a steep incline, you need
to step off the scooter and push.
Do not ride in the rain. Do not ride through puddles or
any other (water) obstacles.
Do not ride with anyone else, including children.
Do not try dangerous actions.
EN
EN EN
EN
Do not keep your feet on the rear mudguard. Do not touch the disc brake.
Do not let go of the handlebar while riding. Do not try riding up or down stairs, nor try
jumping over obstacles.

1
2
1
EN 2EN
3EN 4EN
Folding and Carrying
Align the bell and the buckle and hook them.
Hold the handlebar stem, turn it counterclockwise to open
the safety hook and open the quick release lever.
Hold the handlebar stem with either one hand or both hands
to carry.
Disengage the bell lever from the buckle on
the mudguard.
Open
EN
EN EN EN
Brake Cable
Valve Cap
Unscrew the valve cap. Connect the extension nozzle to the
tire valve stem.
Connect the pump to inflate the tire.
Before adjustment, make sure the scooter is powered off and not charging.
If the brake is too tight/loose, use the 4 mm Allen key to loosen the screw on the caliper. Then slightly adjust the brake line (decrease/in-
crease the exposed lenght), and tighten the screw again.
Adjusting the Disc Brake
Tire Valve Stem

EN
Note: If no password is set, the scooter can be unlocked by the Mi Home/Xiaomi Home app from any of the phones. Make sure
you set the password in the app as soon as possible once you get the scooter. In case you forget the password, please go to
www.mi.com or contact the after-sales department for help.
EN
Lock Your Scooter
Set Password
EN
LockEN UnlockEN
Once the scooteris locked, the motor will be locked and the headlight will be turned off automatically, and there will be an icon displayed in
the control panel.
Tap here>"More Settings">"Set password"
Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz