Yale Real Living YRL210 Technical specifications

1
P/N -210- - Rev DAYRL INST FUL
Set screws
x2
Hex key
x1
M4 x 25.4mm
pan head machine
screws
x2 #7 wood & #8-32
machine x 20mm
Combination screws
x4
M4 x 8mm
pan head machine
screws
x4
Yale Real Living Push Button Lever
®
Installation and Programming Instructions
(YRL210)
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DAMAGE
TO THE PRODUCT AND VOID THE FACTORY WARRANTY
®

2
P/N -210- - Rev DAYRL INST FUL
#2 Phillips Screwdriver
2-3/8" through bolt posts
2-3/4" through bolt posts
Note: Adjustment based on backset
O
optional
default
Preparing to Install

3
P/N -210- - Rev DAYRL INST FUL
?
Left Hand
Hinges Left.
Open Inward.
“”LH
Left Hand Reverse
Hinges Left.
Open Outward
“”LHR
The hand of a door is determined from the secure side of the
door. The term "secure" means the side from which you initially
unlock and enter.
Determining Lever Handing
Left Hand Options

4
P/N -210- - Rev DAYRL INST FUL
?
The hand of a door is determined from the secure side of the
door. The term "secure" means the side from which you initially
unlock and enter.
Right Hand
Hinges Right.
Open Inward.
“”RH
Right Hand Reverse
Hinges Right.
Open Outward
“”RHR
Determining Lever Handing
Right Hand Options

5
P/N -210- - Rev DAYRL INST FUL
x4
1Installing Latch & Strike Plate
Left Hand Installation Shown
Outside of Door
Outside of Door
Frame
Frame

6
P/N -210- - Rev DAYRL INST FUL
2
Inside of
Left Hand Door
Outside of
Left Hand Door
!Do not remove clip
until Step 6
!
Installing Exterior Keypad Escutcheon
Left Hand Installation Shown

7
P/N -210- - Rev DAYRL INST FUL
x2
3
Inside of
Left Hand Door
Outside of
Left Hand Door
Inside of
Left Hand Door
Loosen screw to
remove cover.
Installing Interior Mounting Plate
Left Hand Installation Shown

4
Inside of
Left Hand Door
Inside of
Left Hand Door
Attaching the Cable Assembly
Left Hand Installation Shown
8
P/N -210- - Rev DAYRL INST FUL

9
P/N -210- - Rev DAYRL INST FUL
x4
5
Inside of
Left Hand Door
Installing Interior Escutcheon
Left Hand Installation Shown

10
P/N -210- - Rev DAYRL INST FUL
x1
6Installing Exterior Lever
Remove clip.
Do not rotate internal cam
(marked red). Red mark must
remain on top and in position.
Outside of
Left Hand Door
Outside of
Left Hand Door
!
Outside of
Right Hand Door
Do Not
Overtighten
!
!
Do Not Turn
Counter
Clockwise
Do Not
Overtighten
!
!Do Not Turn
Counter
Clockwise

11
P/N -210- - Rev DAYRL INST FUL
6Installing Exterior Lever con't
Outside of
Left Hand Door
Outside of
Right Hand Door

12
P/N -210- - Rev DAYRL INST FUL
6Installing Exterior Lever con't
Outside of
Left hand Door
Outside of
Right Hand Door
Outside of
Left Hand Door
Do Not
Overtighten
!
Do Not
Overtighten
!
Outside of
Right Hand Door

13
P/N -210- - Rev DAYRL INST FUL
Testing Operation
Inside of Door
Outside of
Left Hand
Door 7
6
7
Outside of
Right Hand
Door
6
Outside of
Left Hand
Door
Outside of
Right Hand
Door
Left Hand Door Shown
Right Hand Door Shown
OR
OR

14
P/N -210- - Rev DAYRL INST FUL
7
Inside of
Left Hand Door
Inside of
Right Hand Door
Do Not
Overtighten
!
Do Not
Overtighten
!
Inside of
Left Hand Door
Inside of
Right Hand Door
Installing Interior Lever
x1

15
P/N -210- - Rev DAYRL INST FUL
7Installing Interior Lever con't
Inside of
Left Hand Door
Inside of
Right Hand Door
Do Not Overtighten
!
Do Not Overtighten
!

16
P/N -210- - Rev DAYRL INST FUL
?
Outside of
Left Hand Door
Inside of Door
7
Testing Final Operation

17
P/N -210- - Rev DAYRL INST FUL
?Testing Final Operation
Inside of
Left Hand Door
7
Inside of Door
Inside of Door

18
P/N -210- - Rev DAYRL INST FUL
Outside of
Left Hand Door
Inside of Door
7
?Testing Final Operation

19
P/N -210- - Rev DAYRL INST FUL
Installing Optional Radio Module
8
Inside of
Left Hand Door
Installing Batteries & Cover
9
Congratulations, you've installed the Yale Real Living Push Button Lever (YRL210)!
®
Continue with Programming Instructions to customize your product.
Inside of
Left Hand Door
"Welcome to
Yale Real Living."
Tighten screw
to replace cover.

20
P/N -210- - Rev DAYRL INST FUL
Changing Lock: Replacing Cylinder
Hardware Troubleshooting
Cycle lock in both the locked and unlocked positions. If problems are found:
1. To Remove cylinder:
See installation Step 6 "Installing Exterior Lever" and reverse appropriate
actions to remove the exterior lever handle and cylinder.
2. To install new cylinder:
A. Follow appropriate actions of installation Step 6 "Installing Exterior Lever"
to replace the cylinder and exterior lever handle.
B. Test operation of new cylinder and key by following "Testing Operation".
Latch will not deadlock
a. Check for sufficient clearance of the latch within the strike-side jamb. Correct this by
increasing the depth of the pocket for the latch.
b. Check for misalignment of latch and/or strike which may be preventing latch from
properly entering the strike. With the door open, extend and retract the latch; if it is
smooth, check the strike alignment.
Latch does not extend or retract smoothly
a. Latch and strike are misaligned, see above.
b. Check the backset of door relative to adjustments already made to latch
c. Verify proper door preparation and re-bore holes that are too small or misaligned.
d. Verify keypad wire harness is routed under the latch (see Fig. A).
e. Verify latch is installed with correct side up (Fig. A).
Door is binding
a. Check that door and frame are properly aligned and door is free swinging.
b. Check hinges: They should not be loose or have excessive wear on knuckles.
Interior of Door
Figure A