Yealink MeetingBar A20 User manual

All-in-one Video Collaboration Bar
MeetingBar A20
English | 简体中文 | Deutsch | Français | Español
Quick Start Guide(V1.0)
Microsoft
Teams
Certied for

Table of Contents
English..............................................................1
简体中文 .......................................................... 6
Deutsch...........................................................11
Français...........................................................16
Español...........................................................21

1
Note:
• We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party
accessories may result in reduced performance.
• Use the Yealink original adapter (48V/0.7A) to charge the endpoint only.The use of the third-party adapter
may cause the damage to the endpoint.
• Put the magnet rings on the HDMI cable to prevent electromagnetic interference.
• The device supports Yealink product CPW90(Bluetooth wireless microphones) or some third-party Bluetooth
microphones/headsets.
Package Contents
MeetingBar A20
VCR20-Teams AAA Battery×2
3m Ethernet
Cable
1.8m HDMI Cable×2
(for the display device)
Cable Tie×5 Power Adapter
×4
×2
×2
Mounting Bracket
and Accessories Silicone Pad×2 Quick Start Guide
CTP18
VCH51
Remote Control Package
(Only Teams edition)
Touch Panel Package
VCH51 Sharing Kit
• Standard accessories
• Optional accessories
WPP20
Wireless Presentation Pod
E
N
G
L
I
S
H

2
Endpoint Installation
Use the bracket to mount your endpoint on a wall. The mounting height affects
your camera view. The recommended height is 1.1m above the ground.
Wall Mounting
Step1: Assemble the mounting bracket
• Mount on a Wall
A20 position
NN
3
4
5
Step2: Mount the A20 to the wall
T4×30 screws
Hole depth: 30mm
Hole diameter: 6mm
TV
10cm
TV
H>120cm
H<120cm
E
N
G
L
I
S
H

3
NN
3
4
5
• Using Yealink TV Mount Bracket
Note: The TV stand should be purchased separately.
E
N
G
L
I
S
H

4
Adjusting the Camera Tilt
15°
15°
• Put on a desk
TV
• Put on a TV stand cart platform
TV TV
Silicone Pad
E
N
G
L
I
S
H

5
CTP18 Connection
Reset
MAC
SN
3m Ethernet Cable
7.5m Ethernet Cable
Pair the CTP18 with A20-Teams:
Sign into the same Microsoft account on both CTP18 and the endpoint, then enter
the PIN code according to the on-screen prompts, after that the system will be auto-
matically paired with the CTP18.
Pair the CTP18 with A20-Zoom:
Enter the IP Address, then the system will be automatically paired with the CTP18.
Endpoint Connections
Note:
• If you connect a touch display device, you can operate the A20 either by remote control or touch control.
• If you connect a non-touch display device, you can use the remote control, mouse or CTP18.
12
2
1
PoE
Display
Power Adapter
1.8m HDMI Cable
3m Ethernet Cable
7.5m Ethernet Cable
VCH51
PoE
E
N
G
L
I
S
H

6
说明：
• 此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干扰采取切实可
行的措施。
• 我们推荐使用由亿联提供或经亿联认可的配件和线缆，使用未经认可的第三方配件和线缆可能会导致性能的下降。
• 使用 HDMI 线前，请套上磁环用于抗电磁干扰。
• 设备支持亿联产品 CPW90( 蓝牙无线扩展麦）或部分第三方蓝牙麦 / 耳机。
包装清单
×4
×2
×2
MeetingBar A20
7号电池 ×2
3米网线 1.8 米 HDMI 线 ×2
（用于接显示设备）
束线带 ×5 电源适配器 支架配件
（用于安装主机） 硅胶垫 x2 快速入门指南
VCR20-Teams
遥控器
CTP18
VCH51
遥控器 ( 只适配 Teams) 触控平板
有线投屏套件
•标准配件
•可选配件
WPP20
无线传屏器
简
体
中
文

7
墙装
使用支架将终端安装在墙上。 安装高度会影响摄像机的视野，建议终端安装的
高度为离地面 1.1m。
步骤 1：安装支架
安装终端
•墙装
A20 位置
NN
3
4
5
打孔直径：6mm
打孔深度：30mm
螺丝规格：T4×30
步骤 2：墙装
TV
10cm
TV
H
>120cm
H<120cm
简
体
中
文

8
•使用亿联专用电视挂架
说明：电视架需单独购买。
NN
3
4
5
简
体
中
文