Yealink Telkom W52P User manual

Call Hold and Resume
To place a call on hold:
To resume the call, do one of the following:
If there is only a call on hold, press .
Press the Options soft key, and select Hold during a call.
If there are two calls on hold, press the Resume soft key to resume the current call,
press the Swap soft key to swap between the two calls.
For more information, refer to the User Guide online at http://www.yealink.com/Support.aspx/.
Copyright 2012 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
Semi-Attended Transfer
Attended Transfer
Call Forward
Blind Transfer
Call Transfer
You can transfer a call in the following ways:
1. Press during a call. The call is placed on hold.
1. Press the Options soft key during a call, and select Transfer. The call is placed on hold.
1. Press the Options soft key during a call, and select Transfer. The call is placed on hold.
2. Enter the number or select the desired handset you want to transfer to.
3. Press the OK key to dial out.
To enable the call forward feature on a specific line:
Always----Incoming calls are forwarded immediately.
Busy----Incoming calls are forwarded when the phone is busy.
No Answer----Incoming calls are forwarded if not answered after a period of time.
1. Press the OK key to enter the main menu, and select Call Features->Call Forward.
3. Select the desired forwarding type:
5. Enter the number you want to forward to in the Target field.
7. Press the Save soft key to accept the change.
2. Enter the number or select the desired handset you want to transfer to.
4. Press or the Transfer soft key when you hear the ring-back tone.
3. Press or the Transfer soft key.
2. Enter the number or select the desired handset you want to transfer to.
3. Press the OK key to dial out.
4. Press or the Transfer soft key after the call is answered.
2. Select the desired line.
4. Select Enabled from the Status field.
6. Press or to select the desired ring time to wait before forwarding (only for No
Answer Forward) in the After Ring Time field.
Call Mute
Press during a call to mute the call.
Press again to un-mute the call.
Quick Reference Guide
www.yealink.com
Configuring your Phone
W52P & W52H
IP DECT Phone

Basic Operations
Turning Handset On/Off
To turn the handset on, do one of the following:
Long press until the LCD screen lights up.
Place the handset in the charger cradle. The handset will be turned on automatically.
To turn the handset off:
Long press again to turn the handset off.
Locking/Unlocking Keypad
Handset Settings
Handset Rename
1. Press the OK key to enter the main menu, and select Settings->Handset Name.
3. Enter a new name.
2. Press the <C soft key to erase the current name in the Rename field.
4. Press the Save soft key to accept the change.
Ring Tone
1. Press the OK key to enter the main menu, and select Settings->Audio->Ring Tones->
3. Press or to select the desired ring tone.
2. Select the desired line, the Internal Call option or the DectPhone option.
4. Press the Save soft key to accept the change.
Melodies.
Volume Adjustment
Press or during a call to adjust the volume of the currently used audio device.
Press or when the handset is idle to adjust the ringer volume.
Long press to lock the keypad.
Long press again to unlock the keypad.
W52P & W52H Quick Reference Guide
3. Press the Options soft key, and select Edit.
4. Edit the values in the Name, Office and Mobile fields.
5. Press the Save soft key to accept the change.
To delete a contact:
1. Press the OK key to enter the main menu, and select Directory.
3. Press the Options soft key, and select Delete to delete the selected entry.
2. Press or to highlight the desired entry.
Switching Silent Mode On/Off
Long press to switch the silent mode on.
Long press again to switch the silent mode off.
Basic Call Features
www.yealink.com
Placing Calls
To place a call from the local directory:
To place a call from the call log:
To place a call from the redial list:
1. Press when the handset is idle to access the local directory.
2. Press or to highlight the desired entry, and press .
Local Directory
To add a contact:
1. Press the OK key to enter the main menu, and select Directory.
3. Enter the desired values in the Name, Office and Mobile fields.
2. Press the Options soft key, and select New Contact.
4. Press the Save soft key to accept the change.
To edit a contact:
1. Press the OK key to enter the main menu, and select Directory.
2. Press or to highlight the desired entry.
To assign a number to speed dial:
1. Press the OK key to enter the main menu, and select Settings->Telephony->Speed Dial.
3. Press or to highlight the desired entry, and press the OK soft key.
2. Press or to highlight the desired speed dial key, and press the Assign soft key.
4. Select the office number or mobile number, if both are stored.
5. Press the OK soft key to accept the change.
1. Press the Call Log soft key, and select the desired list.
2. Press or to highlight the desired entry, and press .
To place a call directly:
Enter the desired number when the handset is idle, and press .
To place a call using the speed dial key:
Long press the speed dial key to place a call to the predefined number.
1. Press when the handset is idle.
2. Press or to highlight the desired entry, and press .
Answering Calls
To answer a call, do one of the following:
Press the Accept soft key.
Press .
Press .
Note: You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by
pressing .
Ending Calls
Press .
3. Select the office number or mobile number if both are stored, and press again.