3M 8864 User manual

1
98-0060-0030-2_1.doc
Activity Summary for
Activity Summary forActivity Summary for
Activity Summary for
8864
88648864
8864 Particulate Res irator User Instructions
Particulate Res irator User Instructions Particulate Res irator User Instructions
Particulate Res irator User Instructions
Initials
InitialsInitials
Initials Date
DateDate
Date Comments
CommentsComments
Comments
PSS 6/5/19 Initial User Instructions

2
8864
88648864
8864
Particulate Res irator N95
Particulate Res irator N95Particulate Res irator N95
Particulate Res irator N95
User Instructions
IMPORTANT: Keep these User Instructions for reference
UI
UIUI
UI-
--
-98
9898
98-
--
-0060
00600060
0060-
--
-0030
00300030
0030-
--
-2
2 2
2 1
11
1.doc
.doc.doc
.doc 6/5/19
6/5/196/5/19
6/5/19
38
3838
38-
--
-xxxx
xxxxxxxx
xxxx-
--
-xxxx
xxxxxxxx
xxxx-
--
-x
xx
x

3
This res irator hel s rotect against certain articles. Misuse may result in sickness or death.
Misuse may result in sickness or death. Misuse may result in sickness or death.
Misuse may result in sickness or death. For
correct use, consult su ervisor and these User Instructions, or call 3M in U.S.A., 1-800-247-3941.
In Canada, call Technical Service at 1-800-267-4414.
IMPORTANT
IMPORTANTIMPORTANT
IMPORTANT
Before use, wearer must read and understand these User Instructions. Kee these instructions for
reference.
Use For
Use ForUse For
Use For
Particles such as those from grinding, sanding, swee ing, sawing, bagging, or rocessing
minerals, coal, iron ore, flour, metal, wood, ollen, and certain other substances. Liquid or non-oil
based articles from s rays that do not also emit oil aerosols or va ors. For additional
information on 3M use recommendations for this class of res irator lease consult the 3M
Res irator Selection Guide found on the 3M Personal Safety Division (PSD) web site at
www.3M.com/workersafety or call 1-800-243-4630 in U.S.A. In Canada call 1 800 267-4414.
Do Not Use For
Do Not Use ForDo Not Use For
Do Not Use For
Do not use for gases and va ors, oil aerosols, asbestos, or sandblasting; articulate
concentrations that exceed either 10 times the occu ational ex osure limit or a licable
government regulations, whichever is lower. In the U.S., do not use when OSHA substance
s ecific standards, such as those for, arsenic, cadmium, lead in the construction industry, or 4,4’-
methylene dianiline (MDA), s ecify other ty es of res iratory rotection. This res irator does not
su ly oxygen.
Biological Particles
Biological ParticlesBiological Particles
Biological Particles
This res irator can hel reduce inhalation ex osures to certain airborne biological articles (e.g.
mold, Bacillus anthracis, Mycobacterium tuberculosis, etc.) but cannot eliminate the risk of
contracting infection, illness or disease. OSHA and other government agencies have not
established safe ex osure limits for these contaminants.
Use Instructions
Use InstructionsUse Instructions
Use Instructions
1. Failure to follow all instructions and limitations on the use of this res irator and/or failure to
wear this res irator during all times of ex osure can reduce res irator effectiveness and may
may may
may
result in sickness or death.
result in sickness or death.result in sickness or death.
result in sickness or death.
2. Before occu ational use of this res irator, a written res iratory rotection rogram must be
im lemented meeting all the local government requirements. In the United States, em loyers
must com ly with OSHA 29 CFR 1910.134 which includes medical evaluation, training, and fit

4
testing. In Canada, CSA standard Z94.4 requirements must be met and/or requirements of
the a licable jurisdiction, as a ro riate. Follow all a licable local regulations.
3. The articles which can be dangerous to your health include those so small that you cannot
see them.
4. Leave the contaminated area immediately and contact su ervisor if dizziness, irritation, or
other distress occurs.
5. Store the res irator away from contaminated areas when not in use.
6. Ins ect res irator before each use to ensure that it is in good o erating condition. Examine all
the res irator arts for signs of damage including the two headbands, attachment oints, and
nosecli . The res irator should be dis osed of immediately u on observation of damaged or
missing arts. Filtering face ieces are to be ins ected rior to each use to assure there are no
holes in the breathing. Immediately re lace res irator if damaged.
7. Conduct a user seal check before each use as s ecified in the Fitting Instructions section. If
If If
If
you
you you
you CANNOT achieve a ro er seal, DO NOT enter the contaminated area. See your
CANNOT achieve a ro er seal, DO NOT enter the contaminated area. See your CANNOT achieve a ro er seal, DO NOT enter the contaminated area. See your
CANNOT achieve a ro er seal, DO NOT enter the contaminated area. See your
su ervisor.
su ervisor.su ervisor.
su ervisor.
8. Dis ose of used roduct in accordance with a licable regulations.
Use Limitations
Use LimitationsUse Limitations
Use Limitations
1. This res irator does not su ly oxygen. Do not use in atmos heres containing less than 19.5%
oxygen.
2. Do not use when concentrations of contaminants are immediately dangerous to life and
health, are unknown or when concentrations exceed 10 times the ermissible ex osure limit
(PEL) or according to s ecific OSHA standards or a licable government regulations,
whichever is lower.
3. Do not alter, abuse or misuse this res irator.
4. Do not use with beards or other facial hair or other conditions that revent a good seal
between the face and the sealing surface of the res irator.
5. Res irators can hel rotect your lungs against certain airborne contaminants. They will not
revent entry through other routes such as the skin, which would require additional ersonal
rotective equi ment (PPE).
6. This res irator is designed for occu ational/ rofessional use by adults who are ro erly
trained in their use and limitations. This res irator is not designed to be used by children.
7. Individuals with a com romised res iratory system, such as asthma or em hysema, should
consult a hysician and must com lete a medical evaluation rior to use.
Storage Conditions and Shelf Life
Storage Conditions and Shelf LifeStorage Conditions and Shelf Life
Storage Conditions and Shelf Life
Before use, store res irators in the original ackaging, away from contaminated areas, dust,
sunlight, extreme tem eratures, excessive moisture and damaging chemicals. When stored in
accordance with tem erature and humidity conditions s ecified below, the roduct may be
used until the “use by” date s ecified on ackaging. Always ins ect roduct and conduct a
user seal check before use as s ecified in User Instructions. If
IfIf
If you CANNOT achieve a ro er fit
you CANNOT achieve a ro er fityou CANNOT achieve a ro er fit
you CANNOT achieve a ro er fit,
, ,
,
DO NOT enter the contaminated area. See your su ervisor.
DO NOT enter the contaminated area. See your su ervisor.DO NOT enter the contaminated area. See your su ervisor.
DO NOT enter the contaminated area. See your su ervisor.

5
Time Use Limitation
Time Use LimitationTime Use Limitation
Time Use Limitation
If res irator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated
area immediately and re lace the res irator.
Fitting Instructions
Fitting InstructionsFitting Instructions
Fitting Instructions
Must be followed each time res irator is worn.
Must be followed each time res irator is worn. Must be followed each time res irator is worn.
Must be followed each time res irator is worn.
1. 2. 3.
4.
4. 4.
4. 5.
5. 5.
5. 6.
6. 6.
6.
1. Position the res irator covering the mouth and nose with the covered metal nose iece facing
u wards (Fig. 1). The res irator is ackaged with the covered metal nose iece slightly bent.
You may need to straighten with your hands before ositioning the res irator.
2. Pull the bottom stra over your head and osition it around the neck, below the ears (Fig. 2).
3. Pull the to stra over your head resting it high at the to of your head (Fig. 3).
4. Adjust for a comfortable fit by ulling bottom edge under chin while holding to edge on nose
(Fig 4).
5. Place your fingerti s from both hands at the to of the metal nose iece. Using two hands,
mold the nose area to the sha e of your nose by ushing inward while moving your fingerti s
down both sides of the nose iece (Fig. 5).
<80%
-4
o
F
+86
o
F
End of Shelf Life Use res irators before the “use by” date s ecified on ackaging
Storage Tem erature Range -20°C (-4°F) to +30°C (+86°F).
Storage Maximum Relative Humidity
<80% RH

6
!
!!
! Pinching the nose iece using one hand may result in im ro er fit and less effective
res irator erformance. Use two hands.
6. Perform a User Seal Check rior to each wearing (Fig. 6). To check the res irator-to-face
seal, lace both hands com letely over the res irator and exhale. Be careful not to disturb the
osition of the res irator. If air leaks around nose, readjust the nose iece as described in ste
4. If air leaks at the res irator edges, work the stra s back along the sides of your head. If
If If
If
you CANNOT
you CANNOTyou CANNOT
you CANNOT achieve a ro er seal, DO NOT enter the contaminated area. See your
achieve a ro er seal, DO NOT enter the contaminated area. See your achieve a ro er seal, DO NOT enter the contaminated area. See your
achieve a ro er seal, DO NOT enter the contaminated area. See your
su ervisor.
su ervisor.su ervisor.
su ervisor.
Removal Instructions
Removal InstructionsRemoval Instructions
Removal Instructions
Cu the res irator in one hand to maintain osition on face. Pull bottom stra over your head.
Still holding res irator in osition, ull to stra over your head and remove res irator.
NIOSH A roved: N95
NIOSH A roved: N95NIOSH A roved: N95
NIOSH A roved: N95
At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil.At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
This res irator contains no com onents made from natural rubber latex.
NIOSH TABLE PLACEHOLDER
Below the above line is a laceholder for a ro riate addresses and hone numbers de ending
on the country or region sold.
FOR MORE INFORMATION
FOR MORE INFORMATIONFOR MORE INFORMATION
FOR MORE INFORMATION
In United States, contact:
In United States, contact:In United States, contact:
In United States, contact:
Internet: www.3M.com/workersafety
Technical Assistance: 1-800-243-4630
For other 3M
For other 3MFor other 3M
For other 3M roducts:
roducts:roducts:
roducts:
1-800-3M-HELPS or
1-651-737-6501
3M
3M 3M
3M Personal
Personal Personal
Personal Safety Division
Safety DivisionSafety Division
Safety Division
3M Center, Building 0235-02-W-70
St. Paul, MN 55144-1000
©3M 2019 All rights reserved 38-xxxx-xxxx-x
3M PSD roducts are occu ational use only. 98-0060-0030-2/1