Abus SECVEST User guide

Installer manual

Information on user manual
2
Deutsch
Nederlands
Diese Bedienungsanleitung enthält wichtige Hinwei
se zur
Inbetriebnahme und Handhabung.
Achten Sie hierauf, auch wenn Sie dieses Produkt an Dri
t-
te weitergeben.
Eine Auflistung der Inhalte finden Sie im Inhaltsverzeic
h-
nis mit Angabe der entsprechenden Seitenzahlen.
Deze gebruiksaanwijzing hoort bij dit p
roduct.
Er staan belagrijke aanwijzingen in betreffende de
ing
ebruikname en gebruik, ook als u dit product doorgeeft
aan derden.
U vindt een opsomming van de inhoud in de
inhoudsopgave met aanduiding van de paginanummers.
English
Dansk
These user manual
contains important information for
i
nstallation and operation.
This should be also noted when this product is passed on
to a third party.
A list of contents with the corresponding page number can
be found in the index.
Denne manual hører sammen med dette
produkt.
Den indeholder vigtig information som skal bruges under
opsætning og efterfølgende ved service.
Indholdet kan ses med sideanvisninger kan findes i inde
kset.
Français
Ce mode d
’emploi appartient à de produit.
Il contient des recommandations en
ce qui concerne sa
mise en service et sa manutention.
Vous trouverez le récapitulatif des indications du
contenu
á la table des matières avec mention de la page
correspondante.

Contents
3

Contents
4
Quick start guide..............................................................................................................................................................7
Target audience...............................................................................................................................................................7
Installing Secvest.............................................................................................................................................................7
Configuring Secvest.........................................................................................................................................................7
Secvest function test........................................................................................................................................................7
Safety information ...........................................................................................................................................................8
Explanation of symbols....................................................................................................................................................8
Intended use ....................................................................................................................................................................8
General ............................................................................................................................................................................8
Power supply ...................................................................................................................................................................9
Wireless operation .........................................................................................................................................................10
Mounting location of the alarm panel.............................................................................................................................10
Device overview.............................................................................................................................................................11
Device front....................................................................................................................................................................11
International key assignment.........................................................................................................................................12
Device rear (mounting plate)..........................................................................................................................................13
Introduction....................................................................................................................................................................15
Terms and definitions.....................................................................................................................................................15
Mounting/Installation.....................................................................................................................................................21
Connection overview, terminal block.............................................................................................................................21
Fixing the mounting plate to the wall .............................................................................................................................23
Positioning the wireless alarm system (alarm panel) ...............................................................................................23
Fixing the mounting plate..........................................................................................................................................23
Connecting the components..........................................................................................................................................24
Installing the optional GSM (FUMO50000)...............................................................................................................24
Installing the micro SD card......................................................................................................................................24
Final steps ................................................................................................................................................................24
Commissioning..............................................................................................................................................................25
Initial commissioning/factory reset.................................................................................................................................25
For a system that is already installed ............................................................................................................................25
Logging into the wireless alarm system.........................................................................................................................26
Configuration..................................................................................................................................................................27
Notes..............................................................................................................................................................................27
Menu structure...............................................................................................................................................................27
Menu control elements...................................................................................................................................................29
Login screen ..................................................................................................................................................................30
Main menu .....................................................................................................................................................................31
INFO...............................................................................................................................................................................33
Panel.........................................................................................................................................................................33
Communications.......................................................................................................................................................34
Status.............................................................................................................................................................................37
Devices ..........................................................................................................................................................................38
Detectors ..................................................................................................................................................................38
Control Devices ........................................................................................................................................................50
Adding control devices (alarm panel only)................................................................................................................50
Outdoor (external) sirens..........................................................................................................................................52
Info module/indoor siren...........................................................................................................................................54
WAM (Wireless Accessory Module) .........................................................................................................................55
Door Locks.....................................................................................................................................................................57
Outputs...........................................................................................................................................................................58
Radio Outputs...........................................................................................................................................................58

Contents
5
Wired Outputs...........................................................................................................................................................59
Partitions........................................................................................................................................................................69
Configuring partitions.....................................................................................................................................................70
Full Set......................................................................................................................................................................70
Configuring partitions.....................................................................................................................................................77
Part Set.....................................................................................................................................................................77
Configuring partitions.....................................................................................................................................................85
HUA response ..........................................................................................................................................................85
System...........................................................................................................................................................................87
General.....................................................................................................................................................................87
Installer details..........................................................................................................................................................91
User access..............................................................................................................................................................92
User reset.................................................................................................................................................................95
Confirmation .............................................................................................................................................................97
Hardware..................................................................................................................................................................99
Security settings .....................................................................................................................................................101
Backup/restore .......................................................................................................................................................108
Panel upgrade ........................................................................................................................................................109
Communications..........................................................................................................................................................110
Network...................................................................................................................................................................110
Email setup.............................................................................................................................................................111
VoIP dialler setup ...................................................................................................................................................112
ARC reporting.........................................................................................................................................................113
ARC Reporting, Phone Book..................................................................................................................................114
ARC Reporting, Account Numbers.........................................................................................................................115
ARC Reporting, Fast Fmt Channels (for "Fast Format" protocol only)...................................................................116
ARC Reporting, CID/SIA Events (for all protocols EXCEPT "Fast Format")...............................................................117
ARC Reporting, More.............................................................................................................................................118
Social Care.............................................................................................................................................................121
Social Care, Phone Book .......................................................................................................................................123
Social Care, Account Numbers ..............................................................................................................................124
Speech Dialler ........................................................................................................................................................125
Speech Dialler, Triggers.........................................................................................................................................126
Speech Dialler, Destinations ..................................................................................................................................127
SMS........................................................................................................................................................................128
SMS, Triggers.........................................................................................................................................................129
SMS, Destinations..................................................................................................................................................130
SMS, Destinations, Message .................................................................................................................................131
SMS, Destinations, Message, Telephone Recipients ............................................................................................132
SMS, Messages .....................................................................................................................................................133
SMS, PSTN SMS ...................................................................................................................................................134
Email.......................................................................................................................................................................136
Email, Triggers .......................................................................................................................................................137
Email, Destinations.................................................................................................................................................138
Email, Messages ....................................................................................................................................................139
Communication options..........................................................................................................................................140
Contacts..................................................................................................................................................................143
Social Care.............................................................................................................................................................144
Test (only available on alarm panel) ......................................................................................................................145
View Log.................................................................................................................................................................152
Virtual keypad.........................................................................................................................................................153
Appendix.......................................................................................................................................................................154
Technical data .............................................................................................................................................................154
Email error messages..................................................................................................................................................157
TCP/IP error messages...............................................................................................................................................158
Overview of the SSL-relevant messages ....................................................................................................................158

Contents
6
VoIP error messages...................................................................................................................................................160
Time zones ..................................................................................................................................................................161
Landline notification centre..........................................................................................................................................161
GSM network notification centre..................................................................................................................................162
SMS notification......................................................................................................................................................162
Email notification/email setup ......................................................................................................................................163
Index..............................................................................................................................................................................167

Quick start guide
7
Quick start guide
Target audience
The instructions for installers aim to help navigate the
individual menus of the program interface.
These instructions are aimed at trained technicians that
have taken an ABUS Security-Center GmbH & Co. KG
seminar and acquired the necessary fundamental
knowledge about the following:
•Installing the wireless alarm system.
•Installing peripheral devices for the wireless alarm
system (e.g. detectors, sirens, GSM/GPRS module,
surveillance cameras).
•Configuring peripheral devices for the wireless alarm
system.
These instructions for installers provide an overview of
the setting options in the individual menus.
Installing Secvest
The installation of the Secvest wireless alarm system is
described in chapter Mounting/Installation from page 21.
Additional information can be found in the document
supplied in the scope of delivery, "Quick Guide
FUAA50000".
The installation/user manual can also be downloaded as
a PDF document.
Link to download the document:
www.abus.com/ger/products/FUAA50000
Configuring Secvest
The configuration of the wireless alarm system is
described in chapter Configuration from page 27.
Secvest function test
After installation and configuration, perform a complete
function test for all systems and components.
Train the user in the basic operation of the system:
•Logging in/out.
•Arming/disarming the system.
•Operating the Secvest and remote control.
•Create a handover log.
Note
Follow the instructions in user training in the
appendix.

Safety information
8
Safety information
Explanation of symbols
The following symbols are used in this manual and on
the device:
The following conventions are used in the text:
Meaning
1. …
2. …
Required action to be carried out in a set order
•…
•…
List without a set order, given either in the text
or warning notice
Intended use
Only use the device for the purpose it was designed
and built for. Any other use is not considered to be the
intended use.
This device may only be used for the following purpose(s):
•intruder alarm system, alarm system.
General
Before using this device for the first time, please read
the following instructions carefully and observe all
warning information, even if you are familiar with the use
of electronic devices.
Caution
All guarantee claims are invalid in the event of
damage caused by non-compliance with these
instructions.
We cannot be held liable for resulting damage.
Caution
In the event of personal or material damage
caused by improper operation or non-compliance
with the safety information, we cannot be held
liable.
All guarantee claims are void in such cases.
Retain the accompanying quick start guide for future
reference.
If you sell or pass on the device on to third parties,
you must include this quick start guide with the device.
This device has been manufactured in accordance with
international safety standards.
Symbol
Signal
word
Meaning
Caution Indicates a risk of injury or
health hazards.
Caution Indicates a risk of injury or
health hazards caused by
electrical voltage.
Important Indicates possible damage to
the device/accessories.
Note Indicates important information.

Safety information
9
Power supply
•To prevent a fire risk or risk of electric shock, do not
expose the alarm panel or the components to rain or
other sources of moisture.
•Do not commission the device near bathtubs,
swimming pools or areas where water is splashed
around.
•Do not alter the device.
•Discontinue use of damaged devices or accessories.
•Using the device for purposes other than those
described may damage this product and may also lead
to hazards such as short circuits, fire or electric shock.
Note
Connection to the public electrical grid is subject
to your country's specific regulations.
Please seek information on these regulations
before connecting the product to the public grid.
•If the device is brought into a warm environment from
a cold environment, condensation may form on the
inside of the device. In this case, wait about an hour
before commissioning the device.
•Disconnect the device from the power supply before
carrying out maintenance or installation work.
Caution
Alterations or modifications to the device
invalidate the guarantee.
Caution
The alarm panel is supplied power via an
integrated power supply unit.
The power supply unitis connected to the
building's 230 V AC grid via a separately secured
line.
Connection to the building's grid is subject to the
country's specific regulations.
The backup power supply is ensured through an
internal battery.
Always replace fuses with fuses of the same type,
never higher.
Caution
Mount the device safely to a dry point in the
building.
Ensure there is sufficient ventilation for the
alarm panel.
Do not expose the alarm panel to temperatures
below 0 °C or higher than 50 °C.
The alarm panel is designed for indoor use only.
The maximum humidity must not exceed 90%
(non-condensing).
Ensure that no metal objects can be inserted into
the alarm panel from the outside.
Disconnect the alarm panel from the power supply
before any work is carried out on the device.
On alarm panels in general
Incorrect or unclean installation work may lead to
erroneous interpretation of signals and therefore
false alarms
.
The operator is liable for any costs incurred for
involving rescue services such as the fire brigade
or police.
For this reason, read these instructions carefully
and ensure that lines and components used are
labelled precisely when the system is installed.

Safety information
10
Wireless operation
Note
No wireless licence is required for Secvest and its
components.
The send/receive properties could be affected by
other signals (e.g. DECT telephones, WLAN).
The wireless devices in this system have been
tested by an independently accredited laboratory
for R&TTE certification.
Mounting location of the alarm panel
Note
The alarm panel should be positioned in a safe
place out of sight of possible intruders and easily
accessible to the operator.
The alarm panel should be mounted on a flat
surface in order to ensure that the back of the
device cannot be tampered with when the alarm
panel is mounted.
The alarm panel should be mounted at a
comfortable height (between 1.5 and 2 m).
Note
If small children are present, the alarm panel
should be mounted out of their reach.
Note
Position the alarm panel so that signal tones can be
heard even outside of the area being monitored.
The alarm panel should be positioned within a
monitored zone so that an unauthorised person
would have to enter a monitored area first before
gaining access to the panel when it is armed.
The alarm panel should be mounted near a socket
or power supply.
If a telephone dialler
is used, the alarm panel must
be connected to a telephone connection.
The alarm panel should be mounted at least
1 metre away from metal objects (e.g. mirrors or
radiators).

Device overview
11
Device overview
Device front
No
Name/function
No
Name/function
1
Status display
Display of status and menus
5
Arm button
Monitoring of all available areas is activated
(device armed).
2
Confirmation buttons
Used to navigate to a higher/lower menu level or to
select options or to exit a menu
6
Disarm button
Monitoring is deactivated (device disarmed).
3
Navigation buttons
Used to navigate up/down
7
Proximity reader
Reader for the proximity keyfob. Hold the keyfob in
front of the ABUS logo.
4
Internal arm button
Perimeter monitoring is activated
(device armed internally).

Device overview
12
International key assignment

Device overview
13
Device rear (mounting plate)
No
Name/function
No
Name/function
1
Mounting opening for screws
8
Connection for LAN cable
2
Housing tamper switch
9
Connection for mains voltage 110 V/230 V AC
50/60 Hz
3
Code reset PINs
10
Micro SD card holder
4
Connection for optional GSM module
(FUMO50000)
11
Fuse holder for mains fuse
5
Connection for ribbon cable
12
Holes for plastic holder for optional GSM module
6
Connections for battery pack
13
USB mini-B
7
Analogue telephone connection

Device overview
14

Introduction
15
Introduction
Terms and definitions
Alarm system
Common term for a burglar alarm system or danger
alarm system.
Alarm type
Alarm systems may have the following alarm types:
internal, local, external or silent.
Danger detector
Device that sends a message to the alarm panel when
a certain event occurs (e.g. movement, glass breakage,
vibrations).
Sounder
Device that sends an alarm message acoustically (siren)
or visually (strobe). Even diallers are sounders.
Alarm zone
A detector (wireless) or detector group (wired) is monitored
via each zone and can be programmed separately.
Alarm panel
The switching panel of the entire alarm system, which
processes all information, forwards it and responds as
necessary.
Arming, disarming
"Activation" of the alarm panel – the panel triggers an
alarm if an intrusion is detected (e.g. a door is opened);
"deactivation" of the alarm panel – the panel does not
trigger an alarm if an intrusion occurs. Danger detectors
are programmed differently: if smoke is detected,
for example, an alarm is triggered even if the alarm panel
is disarmed.
Active intrusion protection
Even an attempt to break in is reported. This can be done
using alarm components that not only combine state-of-
the-art wireless technology with effective mechanical
intrusion protection (mechatronic detectors), but also
monitor attempts to open a door or window using a lever
via innovative magnetic field sensors.
Perimeter protection
All points of access to the premises are monitored,
including house doors, terrace doors, cellar doors,
skylights and all windows. Usually magnetic contacts,
glass breakage detectors and wireless window/door locks
are used. The building's occupants can still move around
freely within the building when the alarm system is armed
internally.
External siren
Sounder for outdoor use, usually designed as a
combination sounder (siren + strobe).
End of line (EOL)
End point of the line system, end point of access to
telephone network.
The line end point or "building distribution for telephone
lines" is the end of the distribution cable for the consumer
connection line within the telephone network.
User
Different users of the alarm system (e.g. owners, tenants)
can be assigned separate rights and user codes.
User guidance
Electronically guided help for operating the alarm panel.
Motion detector
Detector used to identify people by thermal movement (PIR),
ultrasound (US) or microwave/radar (MW).
Bidirectional 2-way wireless (2WAY)
Unidirectional: components (e.g. remote control) and
control modules only transmit commands to the alarm
panel. Bidirectional: components can both receive the
feedback from the alarm panel and evaluate it (e.g. via
LED displays).
BS8243
British standard BS8243 describes a set of methods for
reducing false alarms generated by intruder and hold up
alarm systems.

Introduction
16
Chip key/proximity keyfob/Prox Tag
Electronic "key" for quick access to the building without
code entry.
CLIP
Calling Line Identification Presentation
Coding of wireless signals
Ensures secure transmission of signals without
manipulation or tampering between the alarm panel and
its components.
Contact ID, CID
Protocol for transmitting data to an ARC (alarm receiving
centre).
DD243
British requirement for sequential alarm confirmation.
DHCP
The Dynamic Host Configuration Protocol (DHCP) is a
communications protocol in computer technology.
It facilitates the assignment of the network configuration
to clients through a server.
DHCP makes it possible to automatically integrate a
computer into an existing network without having to
configure it manually. The client usually only has to be
set to obtain the IP address automatically. When the
computer starts on the network, it is automatically
assigned an IP address, subnet mask, gateway and DNS
server by the DHCP server. Without DHCP some
additional settings are required depending on the network
to which the computer is connecting.
Display
Display field on the alarm panel for operating and
configuring the panel.
DNS
The Domain Name System (DNS) is one of the most
important services in many IP-based networks. Its main
task is to respond to name conversion requests.
The DNS works like a telephone directory enquiries centre.
The user knows the domain (the "friendly" computer name
on the IP network), such as "example.org". The user sends
this domain as the query. The URL is then converted by
the DNS into the associated IP address (the "connection
number" on the IP network), e.g. an IPv4 address in form
192.168.2.21 and directs it to the correct computer.
Double end of line (DEOL)
Wiring version for wired alarm systems; wired zones also
take on this configuration.
Wired detector
Alarm and danger detectors that are connected via wire
to the alarm panel.
Wired zone, wired alarm zone
Alarm zone monitored via one or more wired detectors
(usually switched in series).
DTMF
Dual Tone Multi-Frequency
The multi-frequency dialling method is commonly used by
analogue telephone systems.
Intruder alarm system, burglar alarm system
Alarm system that detects an intrusion and triggers
an alarm.
Individual identification of detectors
Makes it possible to determine exactly which detector
has triggered (see also wireless alarm zone).
EN 50131
European standard for alarm systems, "Intrusion and
hold up systems"
External alarm
(Alarm type)
Alarm to which all sounders (internal and external)
respond when triggered. An alarm receiving centre is
also notified of the event.
Shock detector
This detector identifies vibrations that occur when an
attempt to break in is made.
Fast Format, FF
Protocol for transmitting data to an ARC (alarm receiving
centre).
Remote access/remote configuration
Servicing/configuration of the alarm panel from outside of
the monitored premises (e.g. via the internet).
Wireless alarm system
Alarm system with detectors that are connected to
the alarm panel wirelessly (quick and easy installation,
high flexibility).

Introduction
17
Wireless alarm zone, wireless zone
Zone of the wireless alarm panel that is used to identify
and monitor every individual wireless detector.
Wireless control device
For convenient arming/disarming of the alarm panel, e.g.
in another room (in entrance area etc.) The status can be
queried if a bidirectional wireless control device is used.
Wireless window lock/wireless door lock
Combination of mechanical lock and electronic detector.
Pry-attempt monitoring is also possible. i.e. even
attempts to break in are detected.
Wireless remote control
For convenient arming/disarming of the alarm panel,
status query, emergency alarm, etc. regardless of the
user's location.
Wireless detector
Alarm and danger detectors that are connected
wirelessly to the alarm panel.
Wireless key switch
For convenient arming/disarming of the alarm panel
without code entry (by key).
Wireless range
The max. distance between the alarm panel and wireless
detector varies depending on the properties of the building.
Glass breakage detector
These detectors respond to breaking glass. There are
passive, active and acoustic glass breakage detectors.
Danger alarm system
Alarm system that triggers an alarm for additional
dangers/emergencies as well as intrusion.
Protected outdoor area
Area outside of the buildings that is protected from
heavy rain (e.g. a covered entrance area or terrace).
GSM
Global System for Mobile Communications (previously
Groupe Spéciale Mobile), a standard for fully digital
wireless mobile networks, mainly used for telephony but
also for line and packet-based data transmission and
short text messages (SMS).
HTTPS
HyperText Transfer Protocol Secure, a communications
protocol on the web, used to transfer data securely.
HTTPS is used online to establish confidentiality and
integrity in communications between web server and web
browsers (clients). This is achieved through encryption
and authentication.
Without encryption, data transmitted over the internet
can be read as plain text by anyone who has access to
the corresponding network.
IMEI
International Mobile Station Equipment Identity, a unique
15-digit serial number which can be used to uniquely
identify each GSM or UMTS end device.
IMSI
International Mobile Subscriber Identity, used in GSM
and UMTS wireless mobile networks to uniquely identify
network subscribers (internal subscriber identification).
In addition to other data, the IMSI is saved on a special
chip card known as a SIM (Subscriber Identity Module).
The IMSI number is uniquely assigned worldwide to each
customer by the wireless mobile network operators.
The IMSI has nothing to do with the telephone number
assigned to the SIM card.
Indoor siren
Sounder for indoor use, usually a purely acoustic
sounder (in addition to outdoor sirens).
Interior protection
The indoor area of the premises is protected here,
especially areas that an intruder most likely has to enter;
motion detectors and light barriers are usually used here.
Installation
Mounting of the alarm panel and components, including
commissioning.
Internal alarm
Alarm sounds only within the building. The outdoor sirens
do not sound.
Intuitive operation
Easy operation of a device using a menu that is logical
from the point of view of the user.

Introduction
18
IP
Internet Protocol, a network protocol widely used in
computer networks.
Jamming
Interference that makes normal reception of wireless
emissions of electromagnetic waves difficult or impossible.
The source of interference sends out energy in the form of
electromagnetic waves, just like the instruments affected by
the interference, which overlap the original waves either
partially or completely.
Combination signalling device
Combined sounder, e.g. siren (acoustic signal) + strobe
(visual signal).
Communication options
Used to transmit alarm notifications using additional
routes, e.g. wirelessly (GSM module) for voice/text
messages or digital protocols.
Devices
See system components
Receiving centre
See ARC
Line
Another term for zone, mainly used in wired areas.
Local alarm
(Alarm type)
If this alarm is triggered the sounders indoors and
outdoors sound (outdoors the acoustic alarm (siren) must
stop after 3 minutes if in Germany, but the visual alarm
(strobe) can remain on).
MAC
The MAC address (Media Access Control, Ethernet ID)
is the hardware address of every single network adaptor,
used to uniquely identify the device in the network.
Medical emergency
Personal medical emergency, for which help can be
arranged using an alarm.
NC
Normally Closed; contact or switch that opens when
actuated.
NO
Normally Open; contact or switch that closes when
actuated.
Alarm and relay command centre
See ARC.
ARC
Receiving centre; in an alarm receiving centre, messages
collected in connected subscriber zones, e.g. from
danger alarm systems or building technical equipment,
are transmitted, received, documented and processed,
and intervention is provided, via the power supply of the
network operator (leased lines), the public telephone
network, Datex-P/X.25/X.31, IP, GSM, ISDN, or in
Switzerland, via TUS (Alarmnet). Receiving centre from
private security service providers also control call for
intervention services (police/fire brigade).
Magnetic contact
A detector that identifies when a window, door, shutter,
garage door, etc. is opened.
Perimeter surveillance
Continuous monitoring of large areas of open land
around the periphery or the areas used for approaching
the property, e.g. using light barriers and motion
detectors on the premises and/or surveillance cameras
with intelligent motion detection.
Port
Part of a network address.
Configuration
Detailed settings for the alarm panel according to the user's
requirements (e.g. zones/sub-areas can be defined).
PSTN
Public Switched Telephone Network, analogue, a/b

Introduction
19
Smoke alarm device
Optical smoke alarm devices save lives, as they respond
to smoke particles in the air (usually poisonous gases).
Heat detectors/heat difference detectors respond to a
maximum temperature (e.g. 65°C) or a rapid increase in
temperature.
Relay outputs
Switching outputs for external devices (lighting control,
electric shutters, other sounders, etc.)
Sabotage, tamper protection, tampering
So that the alarm panel and its components cannot be
tampered with, each component is monitored for tampering.
Opening a detector and disconnecting cables ALWAYS
triggers an alarm. The components are usually protected by
a cover contact (alarm when detector is opened) and an
anti-removal wall contact.
Scancom
A social care alarm protocol.
Scancom is the same as Scanfast, except for channel 8.
Channel 8 in this case is used to establish a 2-way voice
connection between the alarm panel and the alarm
receiving centre.
Scanfast
A social care alarm protocol.
Scanfest is the same as Fast Format, except that in this
case only channel 2 (social care alarm) and channel 3
(inactivity) are used. Channels 1, 4, 5, 6, 7, 8 are always
"5" (unused).
Arm, disarm
Activating/deactivating the alarm panel.
Arm components
Devices that can be used to arm/disarm the alarm panel
(e.g. remote control, key switch, control device).
Security frequency band
(868 MHz)
This frequency range is approved by the authorities
for the security field. Signals from wireless earphones,
mobile phones, garage door openers, etc. cannot
interfere with devices operating in these ranges.
Europe: frequency use specification of the European
Conference of Postal and Telecommunications
Administrations (CEPT)
Germany: Bundesnetzagentur (BNetzA) – Federal
Network Agency for Electricity, Gas,
Telecommunications, Post and Railway
Austria: the frequency use plan is published by the
Federal Ministry for Traffic, Innovation and Technology
Switzerland: the frequency use plan is set out in the
Swiss National Frequency Assignment Plan (NaFZ) and
published by the Federal Office of Communications
Seismic sensor
See shock detector.
Server
A program that waits for contact from a client in order to
perform a certain service.
SIA
Protocol for transmitting data to an ARC (alarm receiving
centre).
SIA-IP (DC-09)
An IP-based protocol for transmitting data (e.g. FF, SIA
or CID) to an ARC.
Sounder
Sounder that triggers an alarm when it receives a
corresponding command from the alarm panel (siren,
strobe, etc.)
SIM
Subscriber Identity Module, a chip card for mobile
telephones
SMS
Short Message Service, text message;
a telecommunications service for transmitting text
messages, first developed for GSM wireless mobile
networks and now available on landlines as well.
SMSC
Short Message Service Centre
F-SMSC = SMSC for landlines
SMTP, SMTP server
Simple Mail Transfer Protocol
An internet protocol used to exchange email in computer
networks.
It is mainly used to send and forward email.
Other specialised protocols such as POP3 or IMAP are
used to retrieve messages.

Introduction
20
SMTP servers use conventional connections to port 25
("smtp"). Newer servers also use port 587 in order to
receive mail for authenticated users that must be sent to
other mail servers ("submission").
Speech dialler
Component in the alarm panel for transmitting voice
messages. The alarm information is transmitted in
plain text. The text to be transmitted is recorded using
a microphone on the alarm panel.
SSL
Secure Sockets Layer, a network protocol for the secure
transmission of data.
Transport Layer Security (TLS), widely known under its
previous designation, Secure Sockets Layer (SSL), is a
hybrid encryption protocol for secure data transmission
on the internet. Since version 3.0, the SSL protocol has
been further developed and standardised under the new
name TLS, where version 1.0 of TLS corresponds to
version 3.1 of SSL.
TLS encryption is mainly used today with HTTPS. Most
web servers support TLS 1.0, and many also support
SSLv2 and SSLv3 with a number of encryption methods.
Status
Alarm panel status: armed, internally armed or disarmed.
Status feedback
Feedback from the alarm panel to a module (arm
component, info module, etc.) about its current status.
Status query
Query sent to the alarm panel about the system status
(e.g. by pressing the button on the wireless remote control).
Silent alarm
(Alarm type)
This alarm does not trigger any sounders (indoors and
outdoors remains quiet and calm), but an alarm receiving
centre is discreetly notified (intruder is not scared off,
rather caught in the act, aggressive intruders are not
provoked, etc.)
Supervision
The alarm panel monitors whether detectors are present
and active. The components report approx. every 4 min.
The alarm panel responds if it fails to receive status
messages over a longer period of time.
TAE
The Telekommunikations-Anschluss-Einheit
(telecommunications connection unit) is a type of
connector used in Germany for telephone connections.
It is used as a connection to the public telephone network or
as an a/b interface for analogue telephone connections to
additional devices.
Tampering
See sabotage.
TAP
Telocator Alphanumeric Protocol, a transmission protocol
for SMS messages
Technical damage
For example, water damage or escaped gas (protection
against these things is only provided by special danger
detectors).
Partitions
An alarm system can be divided into sub-areas (partitions),
each of which functions separately as an individual alarm
system.
Each partition (e.g. apartment, workshop) can be
operated and configured separately and can contain any
number of zones/detectors.
Telephone dialler
Device used to send alarm messages from a alarm panel
by telephone line. Telephone diallers can be integrated in
alarm panels or added as additional components.
Tunstall
A social care alarm protocol.
Overlapping signal
See jamming.
UCP
Universal Computer Protocol