ADF Web HD67F02-2-B2 MHz Series User manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 1 of 33
User Manual
Revision 1 000
English
Modbus Slave / LoRaWAN Gateway -
Converter
(Order Code: HD67F02-2-B2-xxxMHz, HD67F02-5-B2-xxxMHz)
For Website information:
www adfweb com?Product=HD67F02-B2
For Price information:
www adfweb com?Price=HD67F02-2-B2-xxxMHz
www adfweb com?Price=HD67F02-5-B2-xxxMHz
Benefits and Main Features:
Very easy to configure
Power Supply 12…35V DC and 8…24 V AC
Temperature range: -40°C/+85°C (-40°F/+185°F)
For others LoRaWAN products, see also the following links:
Converter LoRaWAN to
www adfweb com?Product=HD67F01 Modbus Master)
www adfweb com?Product=HD67F03 Modbus TCP Master)
www adfweb com?Product=HD67F04 Modbus TCP Slave)
www adfweb com?Product=HD67F05 Serial)
www adfweb com?Product=HD67F15 M-Bus)
www adfweb com?Product=HD67F16 BACnet Master)
www adfweb com?Product=HD67F17 BACnet Slave)
www adfweb com?Product=HD67F18 Ethernet)
www adfweb com?Product=HD67F19 CAN)
www adfweb com?Product=HD67F20 CANopen)
www adfweb com?Product=HD67F21 DeviceNet Master)
www adfweb com?Product=HD67F22 DeviceNet Slave)
www adfweb com?Product=HD67F23 DMX)
www adfweb com?Product=HD67F24 EtherNet/IP Master)
www adfweb com?Product=HD67F25 EtherNet/IP Slave)
www adfweb com?Product=HD67F26 J1939)
www adfweb com?Product=HD67F27 KNX)
www adfweb com?Product=HD67F28 NMEA 0183)
www adfweb com?Product=HD67F29 NMEA 2000)
www adfweb com?Product=HD67F30 PROFIBUS Master)
www adfweb com?Product=HD67F31 PROFIBUS Slave)
www adfweb com?Product=HD67F32 PROFINET Master)
www adfweb com?Product=HD67F33 PROFINET Slave)
www adfweb com?Product=HD67F34 IEC61850 Client)
www adfweb com?Product=HD67F35 IEC61850 Server)
www adfweb com?Product=HD67F36 MQTT)
www adfweb com?Product=HD67F37 OPC UA Client)
www adfweb com?Product=HD67F38 OPC UA Server)
www adfweb com?Product=HD67F39 S7comm)
www adfweb com?Product=HD67F40 SNMP Manager)
www adfweb com?Product=HD67F41 SNMP Agent)
User Manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 2 of 33
INDEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 7
CONFIGURATION 7
POWER SUPPLY 8
FUNCTION MODES 9
LEDS 10
LORAWAN 11
RS232 12
RS485 13
ETHERNET 14
USE OF COMPOSITOR SW67F02 15
NEW CONFIGURATION / OPEN CONFIGURATION 16
SOFTWARE OPTIONS 17
SET COMMUNICATION 19
LORAWAN ACCESS 22
UPDATE DEVICE 26
MODBUS MAP 28
MECHANICAL DIMENSIONS 30
ORDERING INFORMATIONS 31
ACCESSORIES 31
DISCLAIMER 32
OTHER REGULATIONS AND STANDARDS 32
WARRANTIES AND TECHNICAL SUPPORT 33
RETURN POLICY 33
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document
With this “Document Code” go to web page www adfweb com/download/
and search for the corresponding code on the page Click on the proper
“Document Code” and download the updates
REVISION LIST:
WARNING:
ADFweb com reserves the right to change information in this manual about
our product without warning
ADFweb com is not responsible for any error this manual may contain
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners
Revision Date Author Chapter Description
1 000 03/03/2022 Ff All First release version

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 3 of 33
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual When using the device, legal and
safety regulation are required for each individual application The same applies also when using accessories
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i e
independent limit switches, mechanical interlocks, etc )
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job
R ESIDUAL R ISKS
The device is state-of-the-art and is safe The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage
CE CONFORMITY
The declaration is made by our company You can send an email to support@adfweb com or give us a call if you need it

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 4 of 33
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 5 of 33
CONNECTION SCHEME:
Figure 1a: Connection scheme for HD67F02 2 B2 xxxMHz

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 6 of 33
Figure 1b: Connection scheme for HD67F02 5 B2 xxxMHz

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 7 of 33
CHARACTERISTICS:
The HD67F02-B2 is a Modbus Slave / LoRaWAN Gateway
It allows the following characteristics:
Electrical isolation between Serial and Power Supply;
Mountable on 35mm Rail DIN;
Wide power supply input range: 12…35V DC and 8…24V AC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F]
CONFIGURATION:
You need Compositor SW67F02 software on your PC in order to perform the following:
Define the parameter of Modbus line;
Define the parameter of LoRaWAN line;
Define the list of LoRaWAN end-devices to connect;
Define the LoRaWAN messages to send/receive from each LoRaWAN end-device;
Update the device

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 8 of 33
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC For more details see the two tables below
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67F02-x-B2-xxxMHz 3 5
HD67F02
-
x
-
B2
-
xxxMHz
Caution: Not reverse the polarity power

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 9 of 33
FUNCTION MODES:
The device has got two functions mode depending of the position of the ‘Dip1 of Dip-Switch A’:
The first, with ‘Dip1 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device
The second, with ‘Dip1 of Dip-Switch A’ at “ON” position, is used for upload the Project and/or Firmware
For the operations to follow for the updating, see ‘UPDATE DEVICE’ section
According to the functioning mode, the LEDs will have specifics functions, see ‘LEDS’ section

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 10 of 33
LEDS:
The device has got five LEDs that are used to give information of the functioning status
The various meanings of the LEDs are described in the table below
LED Normal Mode Boot Mode
1: Device State (green) Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly ~0.5Hz): update in progress
2: LoRaWAN communication
(yellow) Blinks when a LoRaWAN message is received Blinks quickly: Boot state
Blinks very slowly ~0.5Hz): update in progress
3: Modbus communication
(yellow) Blinks when a Modbus request is received Blinks quickly: Boot state
Blinks very slowly ~0.5Hz): update in progress
4: Error state (yellow) ON: An error in the communication busses occurs
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly ~0.5Hz): update in progress
5: Link Ethernet (Green) ON: Ethernet cable inserted
OFF: Ethernet cable not inserted
ON: Ethernet cable inserted
OFF: Ethernet cable not inserted

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 11 of 33
LORAWAN:
The LoRaWAN® specification is a Low Power, Wide Area (LPWA) networking protocol designed to wirelessly
connect battery operated ‘things’ to the internet in regional, national or global networks, and targets key
Internet of Things (IoT) requirements such as bi-directional communication, end-to-end security, mobility
and localization services
LoRaWAN® network architecture is deployed in a star-of-stars topology in which gateways relay messages
between end-devices and a central network server
The wireless communication takes advantage of the Long Range characteristics of the LoRa physical layer,
allowing a single-hop link between the end-device and one or many gateways All modes are capable of bi-
directional communication, and there is support for multicast addressing groups to make efficient use of
spectrum during tasks such as Firmware Over-The-Air (FOTA) upgrades or other mass distribution
messages
The converters support all the standard datarates and they work both on public and private networks

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 12 of 33
RS232:
The connection from RS232 socket to a serial port (example one from a personal computer) must be made with a NULL MODEM cable (a
serial cable where the pins 2 and 3 are crossed)
It is recommended that the RS232 cable not exceed 15 meters

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 13 of 33
RS485:
For terminating the RS485 line with a 120Ω resistor it is necessary to put ON dip 1, like in figure
The maximum length of the cable should be 1200m (4000 feet)
Here some codes of cables:
Belden: p/n 8132 - 2x 28AWG stranded twisted pairs conductor + foil shield + braid shield;
Belden p/n 82842 - 2x 24AWG stranded twisted pairs conductor + foil shield + braid shield;
Tasker: p/n C521 - 1x 24AWG twisted pair conductor + foil shield + braid shield;
Tasker: p/n C522 - 2x 24AWG twisted pairs conductor + foil shield + braid shield

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 14 of 33
ETHERNET:
The Ethernet port is used for programming the device
The Ethernet connection must be made using Connector3 of HD67F02-B2 with at least a Category 5E cable The maximum length of the
cable should not exceed 100m The cable has to conform to the T568 norms relative to connections in cat 5 up to 100 Mbps To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC is recommended the use of a cross cable

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 15 of 33
USE OF COMPOSITOR SW67F02:
To configure the Converter, use the available software that runs with Windows called SW67F02 It is downloadable on the site
www adfweb com and its operation is described in this document The software works with MS Windows (XP, Vista, Seven, 8, 10, 11;
32/64bit)
When launching the SW67F02, the window below appears (Fig 2)
Note:
It is necessary to have installed Net Framework 4
Figure 2: Main window for SW67F02

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 16 of 33
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration
A device’s configuration can also be imported or exported:
To clone the configurations of a Programmable “Modbus Slave / LoRaWAN Gateway -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 17 of 33
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor
In the section “Language” it is possible to change the language of the
software
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb com website
Checking the option “Check Software Update at Start of Program”, the
SW67F02 check automatically if there are updatings when it is launched

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 18 of 33
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 19 of 33
SET COMMUNICATION:
By Pressing the “Set Communication” button from the main window for SW67F02 (Fig 2)
the window “Set Communication” appears (Fig 3)
The window is divided in different sections in order to define the different parameters of the
converter:
Ethernet Connection
LoRaWAN
Modbus Slave
Ethernet
Figure 3a: “Set Communication” window

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus Slave / LoRaWAN Gateway
Document code: MN67F02_ENG Revision 1 000 Page 20 of 33
Figure 3b: “Set Communication  Ethernet
connection” window
E THERNET C ONNECTION :
The means of the fields for “Ethernet Connection” are:
In the field “Device Name Hostname)” the Hostname to assign to the
converter is defined;
If the field “Obtain an IP Address Automatically DHCP for Cable
Connection)” is checked, DHCP for LAN connection is enabled;
If the field “Obtain an IP Address Automatically DHCP for Wi-Fi
Connection)” is checked, DHCP for Wi-Fi connection is enabled;
If the field “Enable DNS” is checked, DNS protocol is enabled;
In the field “Primary DNS” the IP Address of the primary DNS server is
defined;
In the field “Secondary DNS” the IP Address of the secondary DNS server
is defined
L O R A WAN:
This section is used to define the general parameters of LoRaWAN The means of
the fields are:
In the field “RF Band” the wireless band used for LoRaWAN communication
is defined;
In the field “Network Type” the type of LoRaWAN network is defined;
In the field “Diagnostic Position” it is possible to define an offset into the
internal memory array where the status of the LoRaWAN end devices
configured is saved The diagnostic is made bit to bit, so each bit will
represent a status of a single end device:
o1  End device connected;
o0  End device not connected
The bits’ order will be the same of the end devices’ definition inside the LoRaWAN Access section;
In the field “RX2 Datarate” the data rate on RX2 window is defined
Figure
3
c
:
“Set Communication

LoRaWAN
” window