ADT Keychain Remote User manual

ADT Keychain Remote
Setup Guide

Make sure the ADT Keychain Remote is within 15 feet
of your SmartThings ADT Security Hub during setup.
1.
• Once you've set up your remote, you'll be able
to use it anywhere within 350 feet from the
ADT Security Hub. (Exact range depends on your
home’s construction, environment, position of the
ADT Security Hub, and the position and number
of other connected devices.)
2.
3. Press and hold the "Disarm" and "Away" buttons on
the remote for 5 seconds, and then release.
Use the SmartThings app on your smartphone
to select the “My Home” tab. Select "Things", and
then “Add a Thing".
Setup
A
LED Light Ring
Setup
• Make sure that your ADT Security Hub is disarmed
before connecting a new device.
• Make sure that you only setup one new device
at a time.

Keychain Remote (Back)
Setup
Use the SmartThings app to scan the QR code on the
back of the remote and then follow the on-screen
instructions to complete setup.
4.
QR Code
5. Remove the QR code from the back of the remote and
attach it inside the ADT Security Hub User Guide for
future reference.
Setup

Testing
B
You can test your ADT Keychain Remote by performing
a Walk Test on the ADT Security Hub, pressing any
button on the remote while within 15 feet of the ADT
Security Hub, and then checking its status on the
touchscreen. See the ADT Security Hub User Guide
for more details.
Use
C
• Press the Disarm button on your remote for
2 seconds to disarm the ADT Security Hub. Door,
window, and motion detectors will be disarmed.
• Press the Away button on your remote for 2 seconds
to arm the ADT Security Hub. Door, window, and
motion detectors will be armed.
• Press the Stay button on your remote for 2 seconds
to arm the ADT Security Hub in Stay Mode. Door and
window detectors will be armed.
• Press the *and Stay buttons on your remote for
3 seconds to send a panic alert (requires optional
ADT professional monitoring service).
Note: If you have an ADT professional monitoring service
activated, additional testing is required whenever you
connect a new device. Follow the on-screen instructions
in the SmartThings app to complete testing.

There are many ways you can use an ADT Keychain
Remote:
The ADT Keychain Remote allows you to arm or disarm
your SmartThings ADT home security system at the press
of a button, or to send a panic alert to ADT professional
monitoring services (additional fees apply).
DSuggestions
• Use one to arm your system and set it to initiate
optional ADT professional monitoring services if
an intrusion is detected in your home (additional
fees apply).
• Use one to disarm your system and set it to turn
on connected lights when you arrive home in the
evening.
Visit SmartThings.com/Welcome for more ideas, tips,
and special offers.
• Use one to disarm your system and set it to turn on
connected speakers when you come home.
Suggestions
• Use one to arm your system and set it to turn down a
connected thermostat when you leave.

Look for the Works with SmartThings label next time
you’re buying a connected device for your home, or visit
SmartThings.com to see the full list of compatible
devices.
Works With SmartThings
E
SmartThings works with a wide range of connected
devices, including lights, cameras, locks, thermostats,
and sensors. It also works with the Google Assistant
and Amazon Alexa so you can control your smart home
with voice commands.

P/N 10015710.
SmartThings, Inc., 665 Clyde Ave, Mountain View, CA 94043, USA. Information in this document
is subject to change without notice. Copyright 2017 SmartThings, Inc. All rights reserved.
ADT and the ADT logo are marks and/or registered marks of ADT. Unauthorized use is strictly
prohibited. Revised 06/17.