Akuvox R26B User manual

R26B Door Phone User Manual

About this manual
Thank you for choosing Akuvox’s R26B door phone. This manual is intended for end userswho need to properly configure the door
phone. This manualis applicable to 26.31.4.xx version, and it provides all functions’ configurations of R26B. Please visit Akuvox
forum or consult technical support for any new information or latest firmware.
Note: Please refer to universal abbreviation form in the end of manual when meet any abbreviation letter.

Content
1. Product Overview...............................................................................................................................................................................................1
1.1. Product Description................................................................................................................................................................................... 1
1.2. Connector Introduction..............................................................................................................................................................................1
1.3. LED Status Information............................................................................................................................................................................. 2
2. Daily Use...............................................................................................................................................................................................................3
2.1. Making a Call.............................................................................................................................................................................................. 3
2.2. Receiving a Call......................................................................................................................................................................................... 3
2.3. Unlock.......................................................................................................................................................................................................... 4
2.3.1. Unlock by RFID Cards.................................................................................................................................................................... 4
2.3.2. Unlock by DTMF Codes................................................................................................................................................................. 4

1
R26B
User Manual
1. Product Overview
1.1. Product Description
Akuvox R26B is a SIP-compliant, hands-free, five buttons door
phone. It can be connected with Akuvox indoor monitors for remote
unlock control and monitor. Users can operate the indoor phone to
communicate with visitors via voice and video. Users can also use
RFID cards to unlock the door It’s applicable in villas, office and so
on.
1.2. Connector Introduction
Ethernet (POE): Ethernet (POE) connector, which can provide both
power and network connection.
12V/GND: External power supply terminal if POE is not available.
RS485 A/B: RS485 terminal.
Figure 1.2-1 R26B’s interface
Figure 1.1 Product Description

2
R26B
User Manual
DOOR A/B: Trigger signal input terminal.
Relay A/B (NO/NC/COM): Relay control terminal.
Note: The general door phone interface diagram is only for
reference.
1.3. LED Status Information
LED Status Description
Blue Always on Normal status
Flashing Calling
Red Flashing Network is unavailable
Green Always on Talking on a call
Flashing Receiving a call
Pink Flashing Upgrading
Figure 1.2-2 General interface

3
R26B
User Manual
2. Daily Use
2.1. Making a Call
Press one of the call buttons to call out the predefined SIP account
or IP address and if LED turns green, it means the call has been
answered.
2.2. Receiving a Call
User can use IP phone or indoor monitor to call R26B and R26Bwill
answer it automatically by default. If user disable auto answer,
pressing button to answer incoming call.

4
R26B
User Manual
2.3. Unlock
2.3.1. Unlock by RFID Cards
Place the predefined user cards in RFID card reader to unlock.
Under normal conditions, R26B will announce “The door is now
opened.” 13.56 MHz RF card is supported on R26B.
2.3.2. Unlock by DTMF Codes
Users can press the predefined DTMF code from an answer unit to
remotely unlock the door during the call. Users will also hear “The
door is now opened.”

R26B
User Manual
Abbreviations
ACS:Auto Configuration Server
Auto:Automatically
AEC:Configurable Acoustic and Line Echo Cancelers
ACD:Automatic Call Distribution
Autop:Automatical Provisioning
AES:Advanced Encryption Standard
BLF:Busy Lamp Field
COM:Common
CPE:Customer Premise Equipment
CWMP:CPE WAN Management Protocol
DTMF:Dual Tone Multi-Frequency
DHCP:Dynamic Host Configuration Protocol
DNS:Domain Name System
DND:Do Not Disturb
DNS-SRV:Service record in the Domain Name System
FTP: File Transfer Protocol
GND: Ground
HTTP: Hypertext Transfer Protocol
HTTPS: Hypertext Transfer Protocol Secure
IP: Internet Protocol
ID: Identification
IR: Infrared
LCD: Liquid Crystal Display
LED: Light Emitting Diode
MAX: Maximum
POE: Power Over Ethernet
PCMA: Pulse Code Modulation A-Law
PCMU: Pulse Code Modulation µ-Law

R26B
User Manual
SIP: Session Initiation Protocol
SNMP: Simple Network Management Protocol
STUN: Session Traversal Utilities for NAT
SNMP: Simple Mail Transfer Protocol
SDMC: SIP Devices Management Center
TR069: Technical Report069
TCP: Transmission Control Protocol
TLS: Transport Layer Security
TFTP: Trivial File Transfer Protocol
UDP: User Datagram Protocol
URL: Uniform Resource Locator
VLAN: Virtual Local Area Network
WG: Wiegand
PCAP: Packet Capture
PNP: Plug and Play
RFID: Radio Frequency Identification
RTP: Real-time Transport Protocol
RTSP: Real Time Streaming Protocol
MPEG: Moving Picture Experts Group
MWI: Message Waiting Indicator
NO: Normal Opened
NC: Normal Connected
NTP: Network Time Protocol
NAT: Network Address Translation
NVR: Network Video Recorder
ONVIF: Open Network Video Interface Forum

R26B
User Manual
Contact us
For more information about the product, please visit us atwww.akuvox.com or feel free to contact us by
Sales email: [email protected]
Technical support email: [e-mail]
Telephone: [phone] ext.7694/8162
We highly appreciate your feedback about our products.